lionelo Dani Baby Stroller User Manual

User manual
Dani Baby stroller

www.lionelo.com

Dani Baby Stroller

Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com

The product meets the requirements of the standard: EN1888-1:2018.

Producer:
BrandLine Group Sp. z o.o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland

WARNING! FOR STROLLER:
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

1. Never leave the child unattended.
2. Ensure that all locking devices are engaged before use.
3. To avoid injury ensure that the child is kept away when unfolding and folding this product.
4. Do not let the child play with this product.
5. This seat unit is not suitable for children under 6 months.
6. Always use the restraint system.
7. Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
8. This product is not suitable for running or skating.
9. The suitable age range is from 6 months to 36 months and the maximum loading weight is 15 kgs.
10. If you wish to take the child out of the stroller or put it inside, make sure the wheel locking mechanism is active.
11. Basket maximum load is 2 kg.
12. Any loads on the bar, sunshade or sides of the stroller may affect its stability.
13. The product is intended for one child only.
14. Do not use accessories which have not been approved by the manufacturer.
15. If you equip the product with a sling, through special adapters, which may also be used as a child safety seat, remember it cannot substitute the crib. If the child needs to sleep, put it in a suitable crib.
16. Use only spare parts delivered or recommended by the manufacturer/distributor.
17. Keep the product away from fire and sources of heat.
18. Do not use the product on stairs.

Stroller parts list (fig. A, B)

1. Sunshade
2. Handle
2a. Handle adjustment key
3. Bow release key
4. 5-point harness
5. Footrest adjustment key
6. Front wheel release key
7. Front wheels| 8. Basket
9. Backrest adjustment lever
10. Folding lock
11. Locking mechanism
12. Rear wheel release key
13. Rear wheels
14. Swivel wheel lock key
---|---

How to assemble and disassemble stroller

1. Stroller frame unfolding: open the unfolding lock (10) and then pull the handle up until you can hear a click (fig. 2).
2. Place the seat on the stroller frame (fig. 1a). Unfold and secure the seat with a bow until you can hear a click. Correct assembly of the seat on the frame is signaled by the click. Make sure the seat has been properly mounted in the stroller frame.
3. To remove the seat from the stroller frame, press the release key on both sides of the seat and then lift them (fig. 1b).
4. To assemble the seat in a rear-facing position (fig. 1c), press the release key and then lift the seat and place it in a desired position. The seat is properly mounted when you can hear a distinctive click.
5. To remove the sunshade, unzip it and then pull up plastic elements on both sides (fig. 1d).
6. To remove seat covering, unzip it around footrest and under the seat, and unzip belts at the base of the seat.

How to assemble and disassemble front wheels

7. Slide wheel shank into corresponding holes on stroller frame (fig. 3).
8. To remove front wheels, press the release key (6) and pull the wheels out.

How to assemble and disassemble rear wheels

9. Slide wheel shank into corresponding holes on stroller frame (fig. 4).
10. To remove rear wheels, press the release key (12) and pull the wheels out.

How to adjust a handle

11. Press the handle adjustment key (2) and pull the handle out or slide it in by choosing one of three available heights (fig. 5).

How to fold stroller frame in forward-facing position

12. Fold the sunshade (fig. 6a), tilt the backrest to the front, fold the footrest as showed by the arrow no. 3 (fig. 6b), next press the handle adjustment key with one hand and lock key with the other, and fold the stroller as showed by the arrow no. 5 (fig. 6c).
13. Dynamically lower the handle as far as you can (fig. 6d). Make sure the folding lock is engaged.

How to fold stroller frame in a rear-facing position

14. Fold the backrest to the back (fig. 7a). Next, follow steps of folding the stroller in a forward-facing position analogically (fig. 7b, 7c). Make sure the folding lock is engaged.

How to use a harness

15. Safety belts adjustment: insert belts into the central buckle until you can hear a click (fig. 8). To remove belts, press the key in the central buckle (fig. 9).
16. To adjust length of belts, pull them through relevant loops in the seat so that they correspond to child’s height (fig. 10).

Swivel wheel lock key

17. Front rotating wheels: to unlock the right wheel, dynamically slide the interlock key (14) to the right (fig. 11). To lock it, slide the interlock key to the left (fig. 12). To unlock and lock the left wheel, take the above- stated actions in a reversed order.
18. Locking mechanism: to lock, press the pedal as showed by the arrow no. 1 (fig. 13). To unlock, press the pedal as showed by the arrow no. 2 (fig. 13).
19. Note: make sure the stroller is locked when immobilized.

How to adjust backrest

20. To set the seat in a sitting position, push the backrest upwards until you can hear a distinctive click (fig. 14).
21. To lower the backrest, press the backrest adjustment lever and set the desired position (fig. 15).

How to adjust footrest

22. To choose one of three available footrest positions, press footrest adjustment keys (5) and then push the footrest downwards or upwards, depending on your preferences (fig. 16).

How to adjust sunshade

23. To increase sunshade range, unzip it and pull out the additional part (fig. 17).

How to adjust bow

24. To remove a bow, press release keys (3) and take the bow out (fig. 18, 19). If you can hear a click, it means the installation is correct.

How to clean and maintain

1. Clean the dust and sand off the wheels and stroller frame on a regular basis. You can clean these parts with a wet cloth.
2. Wash the upholstery of the stroller and its basket manually at the temperature of 30 ºC. Do not dry mechanically.
3. You should regularly inspect particular parts of the stroller for their correct operation, resistance and potential damage. In case of any defects, please contact the authorized service center.
4. Use spare parts recommended by the manufacturer only.
5. Make sure the stroller is not directly exposed to sunlight and high temperatures for a long time. Sunlight may cause the fabrics to fade.
6. Do not use strong chemicals to clean this product.

The pictures are for reference only. The real design of the products may differ from the pictures presented.

Detailed warranty conditions are available on the website: www.lionelo.com
Thank you for purchasing our product

www.lionelo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>