lionelo Margareet Ergonomic Baby Carrier User Manual

Lionello Margaret Ergonomic Baby Carrier

Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com The product complies with the standard CEN TR 16512:2015.

Producer:
BrandLine Group Sp. z o. o. ul. A. Kręglewskiego 1, 61-248 Poznań, Poland

How to use

IMPORTANT! KEEP FOR FUTURE REFERENCE
Before you use the product for the first time, please read this manual.

WARNINGS:

• Constantly monitor your child and ensure the mouth and nose are unobstructed.
• For pre-term, low birthweight babies and children with medical conditions, seek advice from a health professional before using this product.
• Ensure your child’s chin is not resting on its chest as its breathing may be restricted which could lead to suffocation.
• To prevent hazards from falling ensure that your child is securely positioned in the sling.
• The product is intended for children aged 4 months upwards and up to 20kg heavy.
• Only one child is allowed in the carrier.
• When carrying a child in the product, be aware of hazards in the household, e. g. sources of heat (iron, hot drink).
• Parent’s movements in combination with child’s movements may affect stable use.
• Be careful when bending and leaning forward and sideways.
• Do not use the product when doing sports (e.g. running, cycling, swimming).
• Please be advised that the falling risk rises as the child gets more active.
• Regularly check the product for potential damage or wear. Contact the manufacturer’s authorized service center if you have found any irregularities.
• If you do not use the carrier, keep it out of reach of children.
• If your child cannot keep its head on its own, adjust the carrier in a way that child’s head is supported by the carrier’s upper panel, and then zip the hood which serves as additional protection.

Product Description

1. Shoulder belts
2. Shoulder belts adjustment buckle
3. Hood fastener
4. Upper panel
5. Hood
6. Hip belt
7. Front panel width adjustment button
8. Hip belt buckle with adjustment
9. Buckle which connects shoulder belts to adjustment
10. Double buckle protection against undoing
11. Strap which connects shoulder belts to adjustment

The child’s chin should never rest on the parent’s chest because it leads to partial closure of child’s respiratory tract. The carrier user must always make sure the child’s respiratory tract is unhindered and the child breathes properly. Place the child in the carrier properly and pay attention to proper position of legs. Regularly check the child’s position so that you are sure it is correct – in the center of the carrier, with broadly separated legs and straight head which does not fall down or sideways. It is necessary to monitor child’s hands, legs and feet on a regular basis to be sure they are not squeezed by the carrier. To avoid child’s injuries when learning how to place it in the carrier, it is necessary to take relevant actions on the bed or other soft surface with the assistance of another adult. When possible, always put the carrier on and off near a safe surface and in the safe place.Pay special attention when you carry the child on the back. The carrier must not be used by a person with health issues which may affect safe use of the product. If the carrier user feels shoulder ache, backache or neck ache, he/she should stop using the product and consult a doctor.

AGE AND DEVELOPMENT STAGES – GENERAL GUIDELINES

• NOTE! Maximum weight of the child is 20 kg, it applies to all positions.
  NOTE! Applies to all carrying positions: when putting the product on, always hold your child with one hand and do not let it go until you have fastened all belts and guards.

Carrying in front with a face in an inward position

• Child’s age at least 4 months
• Child’s weight at least 5,5 kg

In this position the front panel should be wide – the front panel width adjustment button (7) fastened on the hip belt.

1. Fasten the hip belt (6). Lock the hip belt buckle with a double protection button (10). Adjust the hip belt to your waist (fig. 2a). The carrier’s front panel should be centered in front of you.
   Important: before you take another step, make sure the hip belt has been fixed properly!

2. Take your child on your hands and hug in frontal position so that it wraps its legs around you (fig. 2c).

3. Hold your child all the time and put one shoulder arm by pulling the hand and shoulder (fig. 2d and 2e). Pull the carrier’s panel over the child’s back. Do the same with another hand (fig. 2f).
   NOTE! Hold your child all the time.

4. Pull both palms to the back, fasten the shoulder belts buckle (9) and adjust its length (fig. 2g).

5. Adjust the shoulder belts with the use of shoulder belt adjustment buckle (2). The child should be wrapped properly and belts tightened properly so that they do not squeeze the child’s body too much (fig. 2h).

Carrying in front with a face in an outward position

• Child’s age at least 6 months
• Child’s weight at least 7,8 kg

This position is intended solely for children who are able to keep their head straight. In this position the product can be used in two variants of front panel width:

• Wide position – front panel width adjustment button (7) fastened on the hip belt.
• Narrow position – front panel width adjustment button (7) fastened at the front of the carrier.

1. Adjust the front panel width so that the child can sit comfortably (narrow position for smaller children, wide for bigger ones).

2. Fasten the hip belt (6). Lock the hip belt buckle with the use of the double protection button (10). Adjust the hip belt to your waist (fig. 2a). The carrier’s front panel should be centered in front of you (fig. 3a).
   Important: before you take another step, make sure the hip belt has been fixed properly!

3. Take the child on your hands and hold its chest firmly, then pull its legs between the carrier (fig. 3b).

4. Holding your child firmly, lift the carrier’s panel and cover your child with it.

5. Pull your hands through shoulder belts (fig. 3c and 3d).
   NOTE! Hold your child all the time.

6. Pull both palms to the back, fasten the shoulder belt buckle (9) and adjust its length (fig. 3e).

7. Adjust the shoulder belts with the use of the shoulder belt adjustment buckle (2). The child should be wrapped properly and belts tightened up so that they do not squeeze the child’s body too much.

Carrying on the back with the face in an inward position

• Child’s age at least 6 months
• Child’s weight at least 7,8 kg

This position is intended solely for children who can sit straight on their own (and do not swing to the front and back).In this position the front panel should be wide – the front panel width adjustment button (7) fastened on the hip belt.

Note! For the sake of safety, if you wish to place your child in this position, ask another person for help!

1. Fasten the hip belt (6). Lock the hip belt buckle with the use of the double protection button (10). Adjust the hip belt to your waist (fig. 4a). The carrier’s front panel should be centered behind you.
   Important: before you take another step, make sure the hip belt has been fixed properly!

2. Bend forward, ask your partner to put the child on your back gently.
   NOTE! The child must be held until the carrier has been secured fully.

3. Child’s legs must wrap around the parent’s waist (fig. 4b).

4. Ask your partner to lift the carrier’s panel and wrap the child’s back with it (holding it all the time and securing against falling with another hand (fig. 4c).

5. Use your partner to pull the left and right hand through shoulder belts (fig. 4d).

6. Link the shoulder belts (fig. 4e) and adjust them (4).

7. Adjust the shoulder belts with the use of the shoulder belts adjustment buckle (2). The child must be wrapped properly and belts tightened up so that they do not squeeze the child’s body too much.

Monitor your child permanently to make sure its position is comfortable and its breath is not hindered.

Accessories

Hood

NOTE! If you use the hood, make sure it DOES NOT cover child’s entire face. Check the child regularly. Make sure the hole allows a sufficient flow of air. The product is equipped with a hood which secures the child’s head (e.g. when it sleeps, against wind and sunlight). To use it, take the hood out through the hole (4) and put both fasteners in the designated spot on the shoulder belt (marked as 3 in the fig. 1). The hood must not cover the child’s face; it must protect the back of the head.

Belt guards (pads)
The product is equipped with cotton belt guards with snap fasteners. They protect the shoulder belts against dirt and child’s saliva. The cotton guards can be easily removed and washed. Fasten them in the lower area of shoulder belts (near child’s head). The snap fasteners should be on the external side of the shoulder belts so that they do not irritate the child’s skin.

How to clean and maintain

Check the product for potential damage or rips on a regular basis. Do not repair the product on your own; if you detect any irregularities, contact the manufacturer’s authorized service center. Wash the product manually at the temperature of max. 30 degrees of Celsius. Illustrations are for informational purposes only. The actual appearance of the products may differ from the pictures.

• www.lionelo.com

Thank you for purchasing our product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>