lionelo Mika Baby Stroller User Manual

lionelo Mika Baby Stroller User Manual

Dear customer!

Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com

Before you use the product for the first time, please read this operating manual carefully. Wrong use of the product may pose a threat to child’s life.

Producer:

BrandLine Group Sp. z o.o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING!

1. This product is only suitable for a child who cannot sit up unaided.
2. This product is not suitable for children who can sit down or turn on to the other side or lift on their own hands and knees. Child’s maximum weight: up to 9 kg.
3. Only use on a firm, horizontal level and dry surface.
4. Do not let other children play unattended near the carry cot.
5. Do not use if any part of the carry cot is broken, torn or missing.
6. Use only spare parts supplied or recommended by the manufacturer.
7. Keep the product away from fire and sources of heat.
8. The bottom and grips of the carrycot must be regularly checked for any signs of damage and wear.
9. Make sure the handle is mounted and locked in a suitable position before you lift or move the carrycot.
10. The child can be transported in a carrycot.
11. Child’s head in the carrycot must not be lower than its body.
12. Do not place any additional mattresses inside the carrycot.

List of stroller parts (fig. A, B)

1. Handle

2. Bow releasing key

3. Footrest adjustment key

4. Rear wheels

5. Front wheels

6.  Safety belts

7.  Shoulder protective cushions

8. Canopy

9. Handle height adjustment key

10. Parking mechanism

11. Basket

12. Bow

13. Seat backrest angle adjustment lever

14. Carrycot adapter

15. Child safety seat adapter
    The set 2 in 1 is composed of a stroller frame with a seat and carrycot.
    List of carrycot parts (fig. C)
    

16. Handle

17. Canopy adjustment keys

18. Mattress

19. Cover

How to unfold the stroller frame

1. Unfold the stroller frame by pulling the handle up until you can hear a click which signals correct unfolding of the stroller frame (fig. 1).
   

2. Press the handle height adjustment key to set a desired height. If you can hear a click, it means the handle has been set at a desired height.

INSTALLATION INSTRUCTION

How to install and detach front wheels

1. Insert the wheel shank into corresponding holes on the stroller frame (fig. 2). Correct installation is signaled by a click.

2. To detach front wheels, press the releasing key (1, fig. 2) and take wheels out.

How to install and detach rear wheels

1. Insert the wheel shank into corresponding holes on the stroller frame (fig. 3). Correct installation is signaled by a click.

2. To detach rear wheels, press the releasing key (2, fig. 3) and take wheels out.

How to install the bow

1. Insert the bow into corresponding holes on the stroller frame (fig. 4). Correct installation is signaled by a click.
   

2. To detach the bow, press releasing keys and then take the bow out.

How to install and detach the seat

1. The seat can be installed in a forward- or rear-facing position.

2. Place the seat on connectors on the stroller frame (fig. 5). Correct installation of the seat on the stroller frame is signaled by a click. Make sure the seat has been correctly installed in the stroller frame.
   

3. To detach the seat from the stroller frame, push releasing levers on both sides of the seat and then lift it upwards (fig. 5).

How to install and detach the carrycot
The child can be transported in the carrycot.

1. Undo the inner covering zip (fig. 6) and insert metal bars into carrycot brackets (fig. 7).
   
   

2. Zip the inner covering up and then insert the mattress (fig. 8).
   

3. Put the fabric cover on the carrycot handle, and then pull up the zipper. To unfold the canopy, press the keys on both sides of the carrycot and set the canopy in a desired position (fig. 9).
   

4. Insert adapters (14, fig. B) into corresponding spots on the stroller frame until you can hear a double click and adapters get blocked. Adapters must be placed with the detachment key into a stroller front direction.

5. The carrycot in a stroller frame must be installed in a way that the child is facing the parent who pushes the stroller.

6. Place the carrycot on the stroller frame with the use of adapters (fig. 10). You will hear a distinctive click. Make sure the carrycot has been properly attached on the stroller frame.
   

7. To detach the carrycot from the stroller frame, press releasing keys on both sides of the carrycot and then lift the carrycot.

8. To remove the adapter, press the lower key on the adapter and pull upwards.

How to install and detach the child safety seat (applies to the set with Astrid carseat)
Insert adapters (15, fig. b) into corresponding spots on the stroller frame until you can hear a double click and adapters get blocked (A, fig. 11). Adapters must be placed with a detachment key in a stroller front direction.

1. The child safety seat in the stroller frame must be installed in a way that the child is facing the parent who pushes the stroller.

2. Place the child safety seat on the stroller frame with the use of adapters (fig. 11). You will hear a distinctive click. Make sure the child safety seat has been properly mounted on the stroller frame.
   

3. To detach the child safety seat in case it is necessary, remove it from adapters.

4. To remove the adapter, press the lower key in the adapter (B, fig. 11) and pull upwards.

How to adjust safety belts

1. Insert belts in the central buckle until you can hear a click (fig. 12). To remove belts, press the key on the central buckle.
   

2. To adjust height of the belts, pull them through relevant holes in the seat so that they correspond to the child’s height (fig. 12). You can fasten belts at three height levels.

How to install and detach safety belts

To detach the belts, pull the buckle through the hole in the seat. To install them, insert belts again.

Rotating wheel locking key

To unlock rotation of front wheels, slide the lock key to the left. To lock it, slide the lock key to the right **(fig. 13).

**

Parking mechanism

1. To lock, press the pedal as showed by the arrow no. 1 (fig. 14). To unlock, press the pedal as showed by the arrow no. 2 ( fig. 14).
   

2. Note: make sure the stroller is locked when parked.

How to adjust the backrest

1. To set the seat in a desired position, use the backrest angle adjustment lever which you can find at the back of the seat (fig. 15).
   

2. There are three backrest inclination angles available.

How to adjust the handle

Press the handle adjustment key and then pull out or insert the handle, choose one of three available heights (fig. 16).

How to adjust the footrest

To change position of the footrest, press the footrest adjustment keys on both sides and then push upwards or downwards, depending on your preferences (fig. 17).

How to fold the stroller frame in a forward-facing position

1. To fold the stroller frame with a seat in a forward-facing position, lower the handle to the lowest position and leave rotating front wheels unlocked. Lift the footrest with the seat to the highest position (fig. 20) and fold towards the backrest **(fig. 18).

**

2. Slide the key on the handle under the seat to the left and then dynamically lift the folded stroller (fig. 18).

How to fold the stroller frame in a rear-facing position

1. To fold the stroller frame with a seat in a rear-facing position, lower the handle to the lowest position and leave the rotating front wheels unlocked. Lift the footrest and the seat to the highest position (fig. 20) and then slide the backrest towards the bow (fig. 19).
   

2. Slide the key on the handle under the seat to the left and then dynamically lift the folded stroller (fig. 19).

How to clean and maintain

1. Regularly remove dust and sand from the wheels and frame. You can use a wet cloth to clean these parts.
2. Use a wet cloth to clean the stroller upholstery and basket.
3. You must wash the carrycot upholstery and mattress cover by hand, at the temperature of 30˚C. Do not dry mechanically.
4. Check particular parts of the stroller on a regular basis for their functions, durability and potential damage. In case of any defects, please contact the authorized service center.
5. Avoid excessive direct exposure of the stroller to sunlight and longtime exposure to high temperatures. Sunlight may cause fabrics to fade.
6. Do not use strong chemicals to clean this product.

The pictures are for reference only. The real design of the products may differ from the pictures presented.

Detailed warranty conditions are available on the website:

www.lionelo.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>