SUPER BRIGHT LEDS AFL Series LED Flood Light User Manual

June 8, 2024
super bright leds

SUPER BRIGHT LEDS-logo

SUPER BRIGHT LEDS AFL Series LED Flood Light

SUPER BRIGHT LEDS AFL Series LED Flood Light productImportant: Read all instructions prior to installation.

Safety and Notes

  • Product should be installed and serviced in accordance with applicable national, state, and local building and electrical codes.
  • To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
  • Avoid looking directly into lamp when illuminated.
  • Ensure all mounts are securely attached and will support the weight of the fixture. Failure to properly support fixture may result in damage or injury, for which the manufacturer does not assume responsibility.

Specifications

Check product label for specific electrical specifications related to installation. Improper installation will void warranty.

Specifications| AFL-xK15-110-x| AFL-xK30-110-x| AFL-xK50-110-x| AFL- xK70-110-x| AFL-xK100-110-x
---|---|---|---|---|---
Operating Temperature| -40°–113° F (-40°–45° C)
Environmental Rating| IP65

Wiring Diagram

SUPER BRIGHT LEDS AFL Series LED Flood Light 01

Installation

Installation (U-bracket/Yoke Mount)
  1. Drill holes for mounting and wiring.
  2. Loosen light head adjustment screws with hex key.
  3. Securely attach light to wall and connect wiring.
  4. Rotate light head to desired angle and tighten adjustment screws.SUPER BRIGHT LEDS AFL Series LED Flood Light 01
Installation (Knuckle Mount)
  1. Open junction box and run wiring into box.
  2. Securely mount light to junction box. Use sealant to create weatherproof seal.
  3. Connect wiring.
  4. Replace junction box cover.
  5. Rotate light head to desired angle and tighten adjustment screws.
Installation Instructions (Slip-fitter)

Only available on 70 W and 100 W lights.

  1. Loosen light head adjustment screw with hex key.
  2. Connect wiring.
  3. Securely attach light to pole/post. The maximum pole/post diameter is 2.375 in.
  4. Rotate light head to desired angle and tighten adjustment screw.SUPER BRIGHT LEDS AFL Series LED Flood Light 04

Rev Date: V1 09/30/2021
4400 Earth City Exp, St. Louis, MO 63045
866-590-3533
superbrightleds.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

super bright leds User Manuals

Related Manuals