JONSBO V11 Mini- ITX Tower Computer User Manual
- June 8, 2024
- JONSBO
Table of Contents
JONSBO V11 Mini- ITX Tower Computer
PACKAGE CONTENTS
| Image | Q’ty | Used for |
|---|
|
13
| Screws- PSU, MB, Riser cable
|
13
| Washer
)=!;-
|
8
| Screws -2.5″SSD
|
4
| Aluminum Feet
|
1
5
| PCI-E riser cable
Cable
Connectors
|
USB 3.0
|
|
PWRSW
---|---|---|---
|
HD AUDIO
| |
PWR LED
Parts Diagram
| | Parts
---|---|---
1| External cover
2| DC Fan
3| Aluminum Case Feet
4| Steel Chassis/
5| Plastic Guide/
Installation Guide
|
- Release the rear screw
- Pull the handle to release the steel chassis
---|---
|
- Place 10 shield to rear panel opening
- Secure the MB with screws
|
- Insert the board end of the riser cable to the PCI-E slot on MB
- Secure the PCI-E slot end of the riser cable to the case with screws
|
- Remove PCI slot brackets
- Insert the GPU to PCI-E Slot on Riser cable, secure with screw
- Remove Front fan and bracket for max GPU length 10330mm
| Insert the PSU to corresponding position, secure
with screws
|
- Remove the 2.5″ device cage first, secure 2.5″ SSD with screws
- Place the 2.5″ cage back to chassis, secure it with screws
|
- After the hardware installation, slide the chassis into the external cover
- Secure it with thumb screw
| Install the aluminum feet to the corresponding
positions on the rear panel
© 2017 JONSBO SHENZHEN TECHNOLOGY CO., LTD. All right reserved. Specifications
are subject to change without prior notice. Some trademark may be claimed as
the property of others.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>