SKYDANCE R7 Ultrathin CCT Touch Wheel RF Remote Controller Instruction Manual

SKYDANCE R7 Ultrathin CCT Touch Wheel RF Remote Controller

Features

• Apply to dual color LED controller.
• Ultra sensitive color adjustment touch wheel.
• Each remote can match one or more receiver.
• CR2032 battery powered.
• Operate with LED indicator light.
• White & Black available

Technical Parameters

Input and Output

Output signal| RF(2.4GHz)
Working voltage| 3VDC(CR2032)
Working current| <5mA
Standby current| <10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)

EMC standard (EMC)

| ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certifcation| CE,EMC,LVD,RED
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
Package
Size| L114 x W65 x H20mm
Gross weight| 0.062kg
Warranty
Warranty| 5 years

Mechanical Structures and Installations

DIMENSION

Note:

1. Before the first use, please remove the protective film on the battery
2. If the LED indicator is not on when press key, it is due to dead battery or bad contact caused by multiple plugging, please replace the battery, or raise the battery shrapnel with a screwdriver.

To fix the remote, two options are offered for selection:

• Option 1:
  fix the remote’ back holder on the wall with two screws.

• Option 2:
  adhere the remote’ back holder to the wall with paster

Operation

• When light is on, touch the color wheel, the indicator will display red.
• To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any
  key to make touch wheel quit sleep state.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

• Match:
  • Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
  • The LED indicator fast flash a few times means match is successful.
• Delete:
  • Press and hold match key for 5s to delete all match,
  • The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

• Match:
  • Switch off the power, then switch on power, repeat again.
  • Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
  • The light blinks 3 times means match is successful.
• Delete:
  • Switch off the power, then switch on power, repeat again.
  • Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
  • The light blinks 5 times means all matched remotes were deleted.

Key function

R7 4 zone CCT remote

• On/Off: Short press turn on/off all zone light.
• 1,2,3,4 zone: Short press select and turn on zone light, long press 2s turn off zone light. Short press multiple zone key fastly, will synchronous select multiple zone synchronously.
• Color wheel: Touch to change current zone color temperature.
• Bright+/-: Adjust brightness for current selected zone, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
• 3 Scene: Short press recall the scene, long press 2s save the current color into the scene. the LED indicator will light up longer when save OK. 4 zone recall or save synchronously

R7-1 1 zone CCT remote

• On/Off: Turn on/off light.
• Color wheel: Touch to change color temperature.
• Bright+/-: Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
• 100%,50%: Get 100% or 50% brightness directly.
• WW: Get warm white directly.
• CW: Get cool white directly.
• 3 Scene: Short press recall the scene, long press 2s save the current color into the scene. the LED indicator will light up longer when save OK.

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery positive and negative polarity.
   A long time without the remote control, remove the battery.
   When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>