kogan KAHTSFTMSGA Heated Shiatsu Foot Massager User Guide

June 9, 2024
Kogan

kogan logo KAHTSFTMSGA Heated Shiatsu Foot Massagerkogan KAHTSFTMSGA
Heated Shiatsu Foot Massager User Guide

SAFETY & WARNINGS

  • This appliance is rated at DC 12V 2.5A. Ensure the power supply corresponds to this.
  • If the appliance or power cord shows any signs of damage, cease use immediately and contact Kogan.com for support. Do not disassemble or attempt to repair the appliance yourself.
  • Do not use the appliance in wet or high temperature environments.
  • After use, unplug the power cord from the outlet.
  • Do not use the appliance for more than 30 minutes at a time.
  • If you feel unwell or unusual during operation, cease using the appliance immediately.
  • When in use, if the temperature is too high or emits a bad smell, cease using it immediately and disconnect it from the power supply.
  • If you are receiving medical treatment or with any of the following circumstances, consult a physician before use: pregnant women, children or the elderly, suffering from skin diseases, skin redness, scald, burned, using a pacemaker or similar implantable medical appliances, suffering from heart disease, brittle bones or tumour.
  • To prevent damaging the appliance, avoid contact with sharp objects.
  • This appliance should be cleaned regularly. Use a soft cotton cloth and mild detergent to clean the appliance.
  • Do not stand on the appliance.

OVERVIEW

kogan KAHTSFTMSGA Heated Shiatsu Foot Massager -
fig

Control Panelkogan KAHTSFTMSGA Heated Shiatsu Foot Massager - fig
1

OPERATION

Button Functions

  • Power: Turn on and turn off the appliance.
  • Heat: Turn on and turn off the appliance.
  • Timer: Set the time to 10, 15 or 20 minutes. By default, it is set to 15 minutes. The appliance will turn off automatically after the reaching the set time.
  • Air Intensity: Sets the air pressure strength to low, medium, or high. By default, it is set to low.
  • Knead Intensity (mode): Cycles between the 3 massage modes:
  1. sole of feet rolling
  2. shiatsu
  3. top up with ankle and heel air pressure

Using the Massager
It is recommended to use the massager 10-20 minutes before sleep, to help improve the quality of your sleep.

  1. Connect the plug to the power supply. The machine will be in standby.

  2. Press the power button to enter the default state. The Heat function is on with the corresponding indicator light illuminated.

  3. The Kneading Intensity function in the default state is mode 1 with red light on.
    Press it again to change it to mode 2 with blue light on. Press it a third time to change to mode 3 with an alternating red and blue light.

  4. The Time function in the default state is 15 minutes with its indicator light illuminated. The appliance will automatically turn off after 15 minutes. Press it again to change  to 20 minutes and its indicator light is illuminated. Press it a third time to change to 10 minutes with its indicator light illuminated.

  5. The Air intensity function in default state is L (low air pressure) with its light illuminated. Press it again to change to level M (medium air pressure) with its light  illuminated. Press it a third time to change to level H (high air pressure) with its light illuminated.

  6. The Heat function in the default state is on. Press it again to turn off the heating.

TROUBLESHOOTING

Problems Cause Possible Solution
Appliance does not work The appliance is not connected to power supply or

poor contact.
The set time is complete.| •Ensure the power cable is connected firmly to a wall outlet and power supply is turned off.
•Set the desired massaging time.
Massage function does not work| Long working hours and hence the motor is overheated.| After each massage, wait until the appliance’s motor cools down before you use it again.
Massage intensity is too high or too low| The desired air pressure strength is not selected.| Adjust the Strength function as per your requirements.
For guidelines, see the ‘Operation’ section of this user guide.

Note: The appliance features temperature protection. It will automatically stop working when the temperature exceeds a safe limit. Unplug the power cable to let it cool before using it again.

SPECIFICATIONS

Rated Voltage 12V
Rated Power SOW

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.comkogan
logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals