KitchenBrothers KB753 Hot Water Dispenser User Manual

KitchenBrothers KB753 Hot Water Dispenser

Introduction

Thank you for choosing our Kitchen Brothers product! Please always follow the instructions for safe usage. If you have any questions about the product or experience any problems, please contact us by email : service@kitchenbrothers.nl

Intended Use

This appliance is intended exclusively for the purposes specified in the manual. This appliance is intended solely for use in private households. It is not suitable for commercial use. This appliance is intended only for private use in indoor, dry spaces. It must not be used outdoors. The appliance may only be used with original accessories. It should not be used by unattended children or people who require constant supervision due to limited dexterity. The motor housing is not intended to be wet.

Warnings and Safety Instructions

• Please ensure that the packaging is kept out of the reach of children! Risk of suffocation!
• Make sure to keep this user manual. Read the manual carefully before using your Kitchen Brothers hot water dispenser!

General

• Be aware of the risks and consequences resulting from misuse of the hot water dispenser. Misuse of the hot water dispenser can result in personal injury, or destruction of the device.
• Use the hot water dispenser only for purposes described in this user manual.
• If the hot water dispenser malfunctions, is dropped or (appears to be) damaged in any manner, do NOT use the hot water dispenser and contact Customer Service.
• The hot water dispenser is designed and intended for private, non-commercial use only.
• The hot water dispenser is only intended for household use only, and not: in staff kitchen areas; in shops; in offices and other working environments; by clients in hotels, motels and other residential type environments; in bed and Breakfast type environments; in farm houses.
• Do NOT leave the hot water dispenser unattended when in use. When you are not using the hot water dispenser, turn the device off and disconnect the device from the power socket

Persons

• The hot water dispenser can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
• The hot water dispenser can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Use and store the hot water dispenser out of reach of children.

Use

• The hot water dispenser heats up during use. Do NOT use the device if you are sensitive to heat. Do not touch the hot parts of the appliance. Only use the handle or the button.

• Do NOT use the hot water dispenser in or near a bath, shower, swimming pool, or over a basin filled with water. Do NOT operate the device with damp or wet hands, and do NOT touch the power cord with damp or wet hands. Make sure to prevent any contact with water. Do NOT submerge the hot water dispenser in water. If water does get inside the casing, turn the hot water dispenser off immediately and contact our customer service.

• Keep the hot water dispenser away from heat and areas where the surrounding temperature is relatively hot (e.g. stoves or other sources of heat). Never put the device on an electric or a gas fire.

• Only use the hot water dispenser indoors.

• Always place the hot water dispenser on a flat, solid and stable surface.

• Never use the device to heat up other liquids than water such as coffee, tea or alcohol.

• Make sure there is always a cup beneath the spout before turning on the device.
  Hot steam emits from the device when the water boils or when it has just boiled. Avoid any contact with the hot steam.

• Do not use the hot water dispenser when the water tank is empty. This can cause damage to the heating elements.

• Make sure the water level is always between the minimum and maximum markings (on the inside) before switching on the hot water dispenser. If you exceed the maximum water level, the hot water dispenser will boil over and hot water could be forcefully sprayed over the edge.

• Let the device cool down completely before storing it.

• Do NOT cover the hot water dispenser when it is switched on. Never put blankets or cushions on top of or against the hot water dispenser. This poses a risk of fire, electric shock or injury.

Electronics

• Do not operate the appliance by means of an external timer or a separate remote control system. Do not connect the appliance to an extension cord.
• Only use the device with the accessories and the base provided by KitchenBrothers.
• Disconnect the plug from the socket and turn off the device when you do not use it, and before you clean it.
• Remove all packaging materials and potential stickers before using the hot water dispenser for the first time.
• Do NOT reconstruct, repair or disassemble the hot water dispenser. This can damage the device. For safety reasons, these parts may only be replaced by authorized service personnel. In order to prevent hazards, always send the hot water dispenser to the service center for repairs.
• Make sure your outlet supplies the correct power voltage to avoid damage to the hot water dispenser.
• Always check the power cord and plug before using the hot water dispenser. Do NOT operate the hot water dispenser if the cord or plug are damaged. A damaged cord or plug must be replaced by a qualified person in order to avoid damages and personal injuries.
• If the power fails during usage, turn off the hot water dispenser immediately and pull the plug from the socket.
• Do NOT disconnect the hot water dispenser from its power supply by pulling the cable.
• Do NOT carry or pull the device by its cable.
• Make sure that you do NOT trip over the cable. The cable should not be kinked, trapped or twisted. Do not let the cord hang over the edge of a table or counter, or touch a hot surface.

Receiving Your Shipment

When receiving your shipment, make sure that the contents are consistent with the packing list. Notify your distributor of any missing items. If the equipment appears to be damaged, file a claim immediately with the carrier and notify your distributor at once, giving a detailed description of any damage. Save the damaged packing container to substantiate your claim.

Contents of Package

• Kitchen Brothers hot water dispenser
• Model KB7S3
• EAN 8720195254140

Included Accessories

• 1x User Manual
• 1x Lid
• 1 x Drip tray
• 1x Removable tray
• 1 x Water tank

Product Features

Product Overview

1. Lid
2. Control button for water quantity
3. On button
4. Off button
5. Spout
6. Drip tray
7. Removable tray
8. Button for opening lid
9. Handle
10. Water tank
11. Base

Technical Data

3000W

---|---
Standard temperature| 100°c
Capacity| 2L
Working temperature| 10°C-40°C
Working humidity| 45%-80%
Storage temperature| 10°C-40°C

Storage humidity

| 45%-65%

Other Features

• BPA free;
• Boil-dry protection, overheat protection, anti-slip feet;
• Built-in calcium filter.

Operating Instructions

The hot water dispenser heats up during use. Do NOT use the device if you are sensitive to heat. Do not touch the hot parts of the appliance. Only use the handle or the button  Make sure the water level is always between the minimum and maximum markings (on the inside) before switching on the hot water dispenser. If you exceed the maximum water level, the hot water dispenser will boil over and hot water could be forcefully sprayed over the edge.

Before the first use

Before using the hot water dispenser for the first time, we recommend cleaning it. Follow these steps:

1. Boil 2 cups of water in the device.
2. Remove the excess water from the water tank.
3. Clean the device.
4. Fill the water tank with clean water

Use

1. Take the hot water dispenser from the base to fill it with water. Open the lid of the water tank and fill it with water.
2. Fill the tank with the preferred amount of water and close the lid. Make sure the lid is correctly closed before connecting the plug to the socket.
3. Make sure the water level is between the minimum and maximum line on the water tank. If the water level is not in between these lines, the device will turn off before the water has been boiled.
4. Place the hot water dispenser on the base.
5. Place a cup on the drip tray and make sure it is underneath the spout. The used cup should be 50 ml bigger than the chosen quantity of water. Make sure the cup is in the right place before turning the device on.
6. Set the control button to the preferred quantity of water. You can choose any quantity between 150 ml and 300 ml.
7. Connect the plug to the socket and turn the device on with the on button. The button and the water tank will light up, and the water will start to boil.
8. The water will boil after approximately 45 seconds. The device will turn off automatically and 1 cup of water will come out of the spout. Wait until the water has completely finished running before removing the cup. You can stop the device during the boiling process by pressing the stop button. The On button will automatically turn off.
9. To boil water again you have to turn the hot water dispenser on again.
10. You can store the hot water dispenser on its base. Remove the plug from the socket when you do not use it

Empty the hot water dispenser

1. Let it cool down and remove the plug from the socket.
2. Make sure the ‘stop’ button is not on.
3. Open the lid.
4. Tilt the dispenser back and drain the water from the main reservoir through the opening with the lid.
5. Then tilt the dispenser forward and drain the water from the sub-tank through the spout. Press the ‘start’ button if no water runs out of the spout.
6. Repeat steps 4 and 5 until no more water comes out of the hot water dispenser.
7. It becomes final to empty the hot water dispenser completely if it is not used for a long time.

Let the hot water dispenser boil water a number of times before it is used again, for example during a holiday period.

Boil-Dry Protection

Should you accidentally let the hot water dispenser operate without water, the boil-dry protection will automatically switch off the power. If this occurs, allow the hot water dispenser to cool down for 10 minutes before using it again

Problem – Solution

The start switch will not stay in the on position.

|

The appliance has not reset itself after the boiling cycle.

| The appliance is still too hot after the last boil cycle. Wait a few seconds for it to cool slightly

before trying again.

The water tank does not illumi- nate, and the appliance does not dispense boiling water.

|

The appliance is not plugged in.

| Check the appliance is plugged in and switched on at the supply socket.

The appliance is not positioned correctly on its power base.

| Check that the dispensing nozzle is positioned centrally over the drip tray.
The fuse has blown.| Check the fuse in the plug.

The appliance has boiled dry.

| Allow the appliance to cool down completely then refill it with water.

The appliance does not dispense a full cup of water.

| The appliance has excessive scale.|

Descale the appliance.

The dispensing control may be set too low.|

Adjust the dispensing control.

The appliance produces excess steam but does not dispense boiling water.

|

The water level has dropped below the MIN level.

| Fill with water between the MIN and MAX markings then restart the boil cycle.
The appliance has excessive scale.| Descale the appliance.
The appliance makes a noise and there is a ‘clunk’ sound after water has been dispensed.| This is the sound of the internal valve operating after the boil cycle finishes.|

This is normal operation.

Water drips from the dispensing nozzle after the boil cycle has finished.| There is a residual amount of water left inside the appliance after the boil cycle.|

This is normal operation

Steam comes out from behind the start button and behind the dispensing nozzle| Steam is being vented in a con- trolled manner through designed vents|

This is normal operation

The water reservoir is getting hot.

| Hot water is being returned to the water reservoir|

This is normal operation.

The appliance immediately turns itself on when it is placed on the power base.|

The appliance is already swit- ched on.

|

Press the stop button.

The water in the cup is not 100 degrees.

| 100 degrees is the temperature of dispensing, the temperature of the water will be lower after dispensing due to the influence of the ambient temperature and

the temperature of the cup.

|

This is normal.

Removal of Mineral Deposits

Your hot water dispenser should be periodically(+/- every 25 uses) descaled as the mineral deposits in tap water may form a scale at the bottom of the hot water dispenser. You can use the commercially available descaler and follow the instructions on the package of the descaler.
Note : The supplier is not responsible for damage caused by descalers

Maintenance and Cleaning

Turn off the appliance, unplug the power cord and allow the appliance to cool completely before cleaning. This product is subject to the European Directive (EU) 2012/19/EU. Do not use harsh or chemical cleaning agents. Do not immerse the appliance in water. Clean the outside of the appliance with a dry and clean cloth.

Storage

Store the hot water dispenser in a clean and dry place. Do not store the device in extreme high or extreme low temperatures

Disposal – Recycle

Contribute to a cleaner living environment! This product is subject to the European Directive (EU) 2012/19/EU. Do not dispose of the hot water dispenser with the household waste. For proper recycling, please contact your local authority or your household waste disposal service for further details on your nearest designated collection point

Service and Warranty

If you need service or information regarding your product, please contact the Kitchen Brothers Customer Support at service@kitchenbrothers.nl
Kitchen Brothers provides a 2 year warranty on its products. To obtain service during the warranty period, the product needs to be returned with a proof of purchase. Product defects have to be reported within 2 years from the date of purchase. This warranty does not cover: damages caused by misuse or incorrect repair; parts subject to wear; defects that the customer was aware of at the time of purchase; damages or defects caused by customer neglect; damages or defects caused by third parties

Disclaimer

Changes reserved; specifications are subject to change without stating grounds for doing so.

© LifeGoods B.V. Wisselweg 33 1314CB Almere Netherlands 06/2022 – v2.1
www.kitchenbrothers.nl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>