OPT7 Aura Double Row Snowmobile Installation Guide
- June 9, 2024
- OPT7
Table of Contents
OPT7 Aura Double Row Snowmobile
MAIN COMPONENTS
- DOUBLE WIDE LIGHT STRIPS
- Y˜ SPLITTERS
- AURA CONTROL BOX
- HAND HELD REMOTE
- KEYCHAIN REMOTE
- VARIOUS EXTENSION WIRES
- POWER HARNESS WITH ON/OFF SWITCH
INSTALLATION
STEP 1: Decide where to locate the light strips and ensure wiring has enough length for control box to be installed in desired location.
EXAMPLES
STEP 2
Secure Control box in desired location with Velcro or zipties.
CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely
hidden from exposing elements of moisture. STEP 3
Secure the light strips using the zip ties to tie all the wiring away from
the moving components.
IMPORTANT: The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.
STEP 4
Using the included E-Z Remote or Keychain Remote to select your desired
color or pattern.
- A – ON/OFF
- B – Pattern Control UP
- C – Pattern Control Down
- D – Speed Control
OPTIONAL UPGRADE
Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box.
All new AURA Pro Bluetooth is App enabled by a smartphone controller (iOS &
Android Compatible).
DISCLAIMER: OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modiÿed installations or installation recommendations not speciÿed by OPT7
Lighting will void product warranty.
NEED SUPPORT?
Scan for tutorial videos, troubleshooting tips, and more.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>