NOKIA TWS-201 Go Earbuds+ User Manual

NOKIA TWS-201 Go Earbuds+ User Manual

Nokia Go Earbuds+
TWS-201

Quick Start Guide

What’s in the box

• Charging case
• Earbuds (L/R)
• Ear tips (S/M/L)
• USB Type-C cable
• Quick start guide

Product Overview

Charging case

1. Get started
   1.1 Before using Nokia Go Earbuds+, take off the film on the earbuds and place the earbuds back in the charging case. Then connect the USB Type-C cable to a power source to begin charging. Fully charge the earbuds and the charging case before the first use.
   1.2 For optimal fit and audio performance, replace the ear tips with the size that best suits you.
   

2. Pair and connect with Bluetooth
   2.1 Pairing with the device
   2.1a Turning on and pairing:
   When you take the earbuds out from the charging case, the earbuds will turn on and pair with each other automatically. When they have successfully paired, the LED indicator light of the right earbud will flash blue and red alternately and the earbuds are ready to connect with your Bluetooth® device.
   2.1b Connecting with your Bluetooth device:
   Turn on Bluetooth in your device and choose “Nokia TWS-201” from the Bluetooth menu to connect.
   During the connection process, the LED indicator light on the right earbud will flash blue and red alternately.
   The LED indicator lights of the earbuds will flash blue every 10 seconds when they are successfully connected via Bluetooth
   2.2 After the initial pairing, the earbuds will automatically connect with your Bluetooth device whenever taken out of the charging case.
   2.3 The earbuds will automatically power off if there is no Bluetooth connecion within 5 minutes.

3. Using your earbuds
   3.1. Touch control
   

4. Additional controls
   4.1 Use single earbud :
   You can use either left or right bud as a mono headset after initial pairing
   4.2 Reset to the original settings :
   Put both buds into pairing mode, press and hold both touch bars simultaneously for 5 seconds until the LEDs turn off.

Product and safety information

Remote control functions may vary depending on the model of your device and application. Sound track instructions do not respond to iOS devices. Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line-of-sight. Bluetooth devices must, however, be within 10 meters (33 feet) of each other, although the connection may be subject to interference from obstructions such as walls or from other electronic devices.

Frequency Band: 2400 MHz – 2483 MHz
Maximum Radio Frequency Power: -6~+4dBm

For your safety

Caution：

a. Risk of explosion if the battery is replaced by an incorrect type
b. Do not disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion
c. Do not leave the battery in an extremely hot environment as this may lead to an explosion or leakage of flammable liquids or gases.
d. Do not subject the battery to extremely low air pressure, which could lead to an explosion or leakage of flammable liquids or gases.

Take care of your device

Documents / Resources

| NOKIA TWS-201 Go Earbuds+ [pdf] User Manual
TWS-201, Go Earbuds
---|---
| NOKIA TWS-201 Go Earbuds + [pdf] User Guide
TWS-201, Go Earbuds

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>