Commercial Electric 187 374 4 Inch Glass Shade Holder Kit Instructions
- June 9, 2024
- Commercial Electric
Table of Contents
187 374
WHITE BLANCO
4in GLASS SHADE HOLDER KIT
Hardware Included
187 374 4 Inch Glass Shade Holder Kit
Pair this quality glass shade holder with a decorative glass shade to create a new light fixture anywhere inside your home.
1- Crossbar
2 – 2in screws
3 – Fitter Screws
1- Fiber Glass Insulator :
1 – Green Grounding Screw
INSTRUCTIONS:
- Turn off power supply before installation.
- If the lighting fixture is mounted to a Ceiling outlet box, the box must be supported directly by the building structure and be capable of supporting up to 50 ibs.
- Mount the crossbar (A) to the ceiling box (B) using two 1/2 in 8-32 screws (C) (not included) through the slots in the crossbar. The raised portion of the crossbar should point downward.
- Thread the two 2 in screws (E) only 1/8 in into the threaded holes in the crossbar.
- Connect the black wire from the box (D) to the black wire in the fixture using wire connectors. Repeat step with white wires.
- Connect bare ground wire to the crossbar using a grounding screw (F).
- Align fixture so that the heads of the 2 in screws pass through the fixture into the key-shaped slots. (Fixture can be slightly tilted during assembly to help screws pass through). Rotate fixture and tighten screws.
- Install a light bulb (60 Watt max.) and a glass shade (not included) by tightening the three fitter screws.
Recycle
FOR ASSISTANCE, CALL:
1-877-527-0313
HOMENEPOT.COM
MADE IN VIETNAM
DISTRIBUTED BY: HONE DEPOT
2455 PACES FERRY RD., N.W. ATLANTA, GA 30339
MODEL: 081875
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>