Commercial Electric LTS-4G-W-1 Indoor Smart Surge Protector User Manual

Item #1007 909 243
Model #LTS-4G-W-1
Use and Care Guide
Indoor Smart Surge Protector

Safety Information

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY INDOORS. RISK OF ELECTRIC SHOCK. ADO NOT PLUG INTO ANOTHER RELOCATABLE POWER TAPS OR AN EXTENSION CORD, USE ONLY IN DRY LOCATION.
CAUTION: Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and the electrical service panel. This device features an internal protection At hat will disconnect the surge protective component but will maintain power to the load – now unprotected. If this situation is undesirable for the application, follow the manufacturer’s instructions for replacing the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Responsible Party: The Home Depot
2455 Paces Ferry Road
Atlanta, Georgia
770-433-8211

Wireless Protocol

The Wi-Fi CERTIFIED.'” Logo is a certification mark of Wi-Fi Alliance®.
Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google, Google Play, and the Google Play logo are trademarks of Google LLC.

Warranty
3 YEAR LIMITED WARRANTY
This product is guaranteed to be free of defects in materials and workmanship for three (3) year from the date of purchase. Guarantee does not include normal wear and tear, bulbs, or batteries.

Package Contents

Installation

1. PLUG INTO WALL OUTLET
❑ Insert plug end into a 3-prong receptacle.
WARNING: Do not connect multiple smart surge protector together in a row.

Operation

1. DOWNLOADING HUBSPACE
Download the Hubspace™ app from the App Store or the Google Play Store.

2. CREATING ACCOUNT/SIGNING IN

• Create an account to sign in or login if you already have an account

3. CONNECTING INDOOR SMART SURGE PROTECTOR TO YOUR PHONE

• Connect the smart surge protector to power and follow the instructions on the Hubspace app screen.

NOTE: This Hubspace device requires a 2.4GHz Wi-Fi channel. Hubspace only shows Wi-Fi networks that the device can use. If you do not see your Wi-Fi network name when you attempt to connect the device, check your router settings or move the product closer to your Wi-Fi router.
4. ADDING INDOOR SMART SURGE PROTECTOR TO YOUR PHONE

• Tap ‘+’ button in the upper-right corner of the Hubspace app to add the smart surge protector.

NOTE: Bluetooth access is required for device setup. Enable your phone’s Bluetooth before adding the device.
5. SCANNING QR CODE

• Scan the OR code on the smart surge protector or in the Quick Start Guide.

NOTE: If the QR code cannot be scanned, you can enter the code manually. Tap on Enter Code and follow the instructions.
PAIRING WITHOUT QR CODE

• Press and hold the outlet power button for 5 seconds.
• The outlet power indicator will then blink to indicate it is ready to connect.
• The power strip will stay in this mode for 5 minutes or until the device is added to an account by the Hubspace app.
• The power strip can be connected to a different device by repeating step 1. (This will remove the previously connected device).

6. USING THE INDOOR SMART SURGE PROTECTOR

• Turn on the main power switch.
• Press the outlet power button to turn all outlets on or off at the same time.
• For Hubspace app control:
  • Tap the name of the smart surge protector on the Hubspace Home Page.
  • All outlets can be controlled at the same time or individually.
  • Create schedules and set auto-off timers, if desired.

7. SETTING UP YOUR VOICE ASSISTANT

• Connect the smart surge protector to Google Home or Alexa from the Hubspace app.
• Alternatively, sign in to the Alexa app or Google Home and connect to Hubspace devices from there.

LED Indicator Light Operation
The LED indicator light (CC) is on when any outlet is on, and off when all outlets are off. Note that WiFi state is available via the mobile app.
Power Loss
POWER RETURN OPERATION
If power is lost and returns, the power outlets will resume in the same state as they were before the power loss (i.e., if it was off, then it will stay off, and if it was on, it will be on).

HOMEDEPOT.COM/HUBSPACE
Please contact 1-8775925233 for further assistance.

Documents / Resources

| Commercial Electric LTS-4G-W-1 Indoor Smart Surge Protector [pdf] User Manual
LTS-4G-W-1 Indoor Smart Surge Protector, LTS-4G-W-1, Indoor Smart Surge Protector, Smart Surge Protector, Surge Protector, Protector
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>