ZKTeco ZK-D300 Hand Held Metal Detector User Manual
- June 5, 2024
- ZKTECO
Table of Contents
UserManual
Hand-Held Metal Detector
ZK-D300 Version: 2.1
Date: November 2021
Diagram
- Indicator (alar ery m, low batt )
- Volume hole
- Key combination
- Handle
- USB port
- Battery cover
- Detection area
- Battery cover screw
- Hole for hanging rope
Keys and Operation Instructions
This detector has illuminated keys, which indicate its working state.
Power Key: Long press to power on, and in working state long-press it to
power off. The power indicator flashes once every 3 seconds in a working state.
Sensitivity Key: The sensitivity is divided into 4 levels; low, medium,
high, and super high. Select low, medium, or high sensitivity by pressing the
corresponding sensitivity key, the corresponding indicator flashes once in
every 3 seconds. To switch to super-high sensitivity, select a sensitivity,
and press the sensitivity key again. Three sensitivity indicators w don’t fl
ash.
Sound & Vibration key: Press this key to switch between “Sound” >“
Vibration” >“ Sound and Vibration” mode. When the indicator doesn’t flashes, it
indicates sound and light alarm mode. When it flashes once every 3 seconds, it
indicates the vibration and light alarm mode. When it flashes once every 1.5
seconds, I ti indicate the sound, vibration, and light alarm mode.
Features
- Digital design and strong anti-interference ability.
- Easy to use and carry.
- High sensitivity, Four sensitivity levels. m
- Sound and light alar.
- Three alarm modes: Vibration, Sound, vibration, and sound.
- Uses an AA battery type which is easily available. 70 hours of continuous operation. (Pay attention to the positive and negative poles while installing the battery)
- In a standby state for more than 2 minutes, it will sleep automatically, and in case of more than 10 minutes of inactivity, it will shut down. Press any button or take it close to any metal to activate it.
Indicator Instructions
Alarm indicator: Divided into 4 intensity levels, the larger or closer the metal is during detection, the higher the alarm level.
Low Battery Indicator: The leftmost light flashes quickly when the power is low.
Main Parameters
Size: 360×82.5×42.5mm
Weight: 270g
Power Supply: Two AA batteries.
Power Consumption: <60mW
Material: The cover is mainly ABS and rubber.
Operating Temperature: -1 0°C ~ +40°C (Relative Humidity: 5 ~ 95%)
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
No.32, Pingshan Industrial Avenue, Tangxia Town,
Dongguan City, Guangdong Province, China 523728
Phone : +86 769 – 82109991
Fax : +86 755 – 89602394
www.zkteco.comhttps://www.zkteco.com/en/
Copyright © 2021 ZKTECO CO., LTD. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>