trevi XR 8A30 Portable Amplified Speaker User Guide
- June 16, 2024
- Trevi
Table of Contents
trevi XR 8A30 Portable Amplified Speaker
- For additional information and updates of this product see: www.trevi.it
USAGE NOTES
Do not use a power supply with a voltage higher than 5V, causes damage to the player.
- Listen at high volume for long periods, which may damage your hearing.
- Avoid using it in the following cases:
- Near strong heat sources, such as central heating plants or stoves.
- In very humid places such as bathrooms, swimming pools, etc.
- In very dusty places.
- In places subject to strong vibrations.
- Position the appliance in such a way that there is always enough room for free air circulation (at least 5 cm).
- Do not block the air inlets.
- If any liquid enters the appliance, unplug it immediately from the socket and take it to the nearest TREVI-authorised service centre.
- Before switching on the appliance, always check that the power cable and the connection cable are properly installed.
- No naked flame sources, such as lighted candles, should be placed on this.
- The apparatus shall not be exposed to dripping or splashing water and no object filled with water, such as vases, should be placed on the unit.
- Keep this manual for future reference.
CARE AND MAINTENANCE
For cleaning it is recommended to use a soft, slightly damp cloth. Avoid solvents or abrasive substances.
IMPORTANT
The construction of this device guarantees long flawless operation. However,
if there is some problem, you should consult your nearest authorized service
centre. TREVI pursues a policy of continuous research and development.
Therefore, the products may show different characteristics from those
described.
WARNING FOR THE CORRECT USE OF RECHARGEABLE BATTERY
- Recharge the battery at an ambient temperature between 5°C and 35°C.
- Don’t recharge for more than a suitable period to prevent the risk of overheating and bursting.
- Recharging the battery over a suitable period or an extended period of inactivity may reduce battery duration.
- The rechargeable battery is liable to wear and tear and its performance will reduce gradually.
- To extend the duration of the battery use it when is completely charged up to the complete discharging, then recharge it fully before using it again. Recharge a battery not completely consumed, will result in a reduced duration. In this case, repeat the full charging/discharging cycle many times.
- Avoid recharging the battery for the whole night.
CONTROLS
- button, Power On/Off, Light indicator
- button, Play/Pausa
- + button, Volume+/ Next track button
- – button, Volume -/ Previous Track button
- M button, MODE
- Microphone
- USB input
- AUX IN input
- MicroSD memory input
- TYPE-C socket for charging.
CHARGING
The speaker must be recharged when switched off.
- Using the supplied USB cable, connect the side with the USB TYPE-C jack to the TYPE-C socket (10) and the other end to the USB port of a PC or USB charger (5V 1A not included);
- The indicator light (1) will begin to flash, when charging is complete it will turn off.
Note: When the battery is in the process of exhaustion, the device will emit a warning sound for a few times before it shuts down automatically.
BASIC OPERATION
To switch on the speaker, press and hold button (1) for 3 seconds. Press the M button (5) to choose from:
- Bluetooth mode.
- Micro SD mode, if a micro SD type memory in the slot (9) it will start playback of the music automatically.
- USB Mode, if a USB-type memory in the slot (7), the device will start playing songs automatically.
VOLUME ADJUSTMENT
Press and hold the -/ Volume – (4) button or +/ Volume + (3) button to adjust the volume.
BLUETOOTH OPERATION
PAIRING DEVICES
- Place the speaker near the Bluetooth device to be paired;
- Turn on the speaker and press the M key (5) until the guide voice plays the message “Bluetooth Mode”, the button (1) will start blinking;
- Follow the instructions of your device to search for the speaker;
- Search and pair the speaker named “XR 8A25” and enter the PIN “0000” if requested;
- After pairing (you will hear a confirmation sound and the button (1) will stay on steady) it will be possible to play the music.
Notes
- The Bluetooth speaker only works with a connection at a time, the connection can not be interrupted during normal operation.
- When the Bluetooth pairing with external devices fails, delete another Bluetooth device in the list of connections, restart the Bluetooth speaker and search for the signal again.
COMMANDS IN BLUETOOTH MODE
- To start music playback, press button (2) or start it from your device;
- Press once the + button (3) to skip to the next track, press once the – button (4) to skip to the previous track;
- Press button (2) to pause, press it again to resume music playback; In case of connection with a telephone, when a call is received, a sound warning will be heard.
- When you receive a call, click once on button (2) to open the call and activate the speaker phone feature, press again to end a call.
- Long press button (2) to reject a call.
TWS OPERATION (TRUE WIRELESS STEREO)
This function allows you to pair 2 speakers (to be purchased separately) for
stereo music playback; This feature is only available in Bluetooth mode with
compatible devices.
- Turn off the Bluetooth function on your phone or other Bluetooth device;
- Turn on the two XR 8A25 units and choose the Bluetooth mode;
- Press and hold the M button (5) of either speaker (a sound is heard confirming the TWS function opened) and, after few seconds two bluetooth speakers make a tone, it shows two speakers bluetooth connected;
- Use your device to search the pairing name “XR 8A25” and enter the PIN “0000” if required, music is ready to play for the two units together after paired.
Note: In case of non-pairing between the 2 speakers, switch off both devices and repeat steps 1, 2 and 3.
OPERATION MICRO SD CARD/ USB MEMORY
- Turn on the speaker;
- Insert a micro SD card into the slot (9) holding the contacts facing upwards (the guide entry will reproduce the message “Play by TF Card”) or insert a USB memory (the guide entry will reproduce the message “Play by USB Drive”);
- Playback will start automatically;
- Press once the + button (3) to skip to the next track, press once the – button (4) to skip to the previous track;
- Press button (2) to pause, to resume playback press again.
OPERATION AUX IN
- Turn on the speaker;
- Connect the Jack/Jack audio cable (not supplied) to the AUX jack (8) and the other end to the external device. The guide entry will reproduce the message “AUX MODE”;
- Start from the external device playback.
TECHNICAL FEATURES
- Rechargeable Battery:………………………..Internal Lithium to 3.7V,1200mAh
- Power: …………………………………………..5V 1A
- Bluetooth max power transmission : ……..0,8mW
- Bluetooth transmission frequency : ………2.4GHz
- Dimensions: ……………………………………1576 x 70 x 70mm
- Weight: …………………………………………..490g
INFORMATION ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: the operation of removal and disposal is reserved for technical personnel! Whatever type of battery is used up, it should never be placed in household waste, fire or water. Each type of used battery must be recycled or disposed of at appropriate dedicated collection points.
To remove the battery
- Remove the cover grille above the speakers.
- Unscrew all the screws present and separate the front part of the cabinet from the rear one;
- Identify the battery, remove it and replace it with one of the same characteristics and capacity.
Precautions for correct disposal of the product.
The symbol shown on the equipment indicates that waste must be disposed of in
“separate collection” and so the product must not be disposed of together with
urban waste. The user must take the product to special “separate waste
collection centres” provided by the local government, or deliver it to the
retailer against the purchase of a new product. Separate collection of waste
and subsequent treatment, recycling and disposal operations promote the
production of equipment with recycled materials and limit negative effects on
the environment and on health caused by improper handling of waste. Illegal
disposal of the product leads to the enforcement of administrative penalties.
If you will not find your language in the instruction manual, please go to our website www.trevi.it to find it
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby TREVI Spa declares that the radio equipment type XR 8A25 complies with
directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
https://www.trevi.it/dms/zidi/TREVI/DOCXR8A25.pdf
- Strada Consolare Rimini-San Marino, 62 47924 Rimini (RN) Italy
- Tel. 0541/756420 – Fax 0541/756430 – www.trevi.it – e-mail: info@trevi.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>