Commercial Electric PKL004IS3-UL 3-Light LED Puck Light Kit Instruction Manual

June 3, 2024
Commercial Electric

Commercial-LOGO

Commercial Electric PKL004IS3-UL 3-Light LED Puck Light Kit

Commercial -PKL004IS3-UL-3-Light-LED Puck-Light-Kit-
PRODUCT

THANK YOU

We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this under-cabinet light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!

Product Description

Commercial -PKL004IS3-UL-3-Light-LED Puck-Light-Kit-
FIG-1

Safety Information

Carefully read and understand the information in this manual before you begin the installation. Failure to do so could lead to electric shock or a fatal hazard.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules and ICES-005 of the IC Rules. These limits are designed to provide reasonable Installation protection. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference. However, there is no guarantee that interference will not occur in a particular installation. H this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more to the following measures:

  • Reorient or relocate the receiving area.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment in to a different outlet and circuit from the receiver outlet and circuit.
  • Consult the dealer or an experienced radio/TV technician for help.

WARNING: To reduce the risk of fire, electric shock, or injury to persons

  • Use only insulated staples or plastic ties to secure cords;
  • Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall;
  • Position the portable cabinet light with respect to the cabinet so the lamp replacement markings are able to be read during relamping
  • Not intended for recessed installation in ceilings, or soffits; e) The National Electrical Code (NEC) does not permit cords to be concealed where damage to insulation may go unnoticed. To prevent fire danger, do not run cords behind walls, ceilings, soffits, or cabinets where it may be inaccessible for examination. Cords should be visually examined periodically and immediately replaced when any damage is noted.

CAUTION

  • This is a non-replaceable LED light source. Do not dismantle this fixture. There are no user-serviceable parts inside.
  • For indoor and dry location use only.
  • Do not touch the fixture when the light source is ON.
  • Deviation from the assembly instruction may result in a risk of fire and electric shock.
  • Do not operate this fixture with a missing or damaged cover or housing.

Limited Warranty

The manufacturer warrants this product to be free from defects in materials and workmanship for a period of three (3) years from the dale of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product Is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, Is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply lo any product that is found to have been improperly installed, set up, or used In any way not In accordance with the Instructions supplied with the product. This warranty shall not apply to a failure o1 the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material workmanship. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including labor/expense costs Involved In the replacement or repair of said product Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepol.com.

Pre-Installation

PLANNING INSTALLATION

Compare all parts with the parts listed in the Package ColTlents section. If any part appears missing or damaged, do not install and use this light. Contact customer service.

Commercial -PKL004IS3-UL-3-Light-LED Puck-Light-Kit-
FIG-2

Commercial -PKL004IS3-UL-3-Light-LED Puck-Light-Kit-
FIG-9

Installation

Preparing the light for installation

Before installation, make sure the surface you intend to mount the product on is free of moisture, oil, grease, dust, and dirt to ensure proper adhesion. Test painted surfaces. Adhesive tape may damage the surface when removed.

Double-sided tape

  • Mark the desired area where you want to install it.
  • Remove one side of the tape (8) and secure lo the LED puck light (A).
  • Then remove the other side of the tape and secure to where you want ID to install the light.

Commercial -PKL004IS3-UL-3-Light-LED Puck-Light-Kit-
FIG-4

  • Affix self-adhesive wire guides (C) to desired locations as needed to guide and secure the linking cord and AC/DC plug-In adaptor cord.
Movement sensor

Commercial -PKL004IS3-UL-3-Light-LED Puck-Light-Kit-
FIG-5

NOTE: Wave hand once below the sensor to turn ON the light, and wave again to turn it OFF. After the light is turned ON, hold your hand under the sensor for a few seconds to activate the dimming function. The brightness will repeat from highest to lowest and then from lowest to highest. Move your hand away from the sensor range at your desired brightness, which will be memorized by the light even after the power is cut off.

Commercial -PKL004IS3-UL-3-Light-LED Puck-Light-Kit-
FIG-6

To link more lights

Attention

  • The LED nulls on the same series can be powered by one adaptor, the maximum linkages are 12 units.
  • Only connect to the lights of the same series. (PKLDD4IS3-UL)
  • Only ONE light is allowed to receive the main power input from the supply circuit.
  • otherwise, it will cause damage or fire.

Link the light with 17 in. cord (D).

Commercial -PKL004IS3-UL-3-Light-LED Puck-Light-Kit-
FIG-7

Link the light with 40 in. cord (E).Commercial -PKL004IS3-UL-3-Light-LED
Puck-Light-Kit-FIG-8

Questions, problems, missing parts

  • Before returning to the store, call Commercial Electric Customer Service
  • 8 a.m.-7 p.m., EST, Monday- Friday, 9 a.m.- 6p.m. Saturday.
  • 1-877-527-0313
  • HOMEDEPOT.COM

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Commercial Electric User Manuals

Related Manuals