SCANSTRUT DS-LP-MULTI-S Low Profile Multi Cable Seal Installation Guide
- June 14, 2024
- SCANSTRUT
Table of Contents
DS-LP-MULTI-S
DS-LP-MULTI-BLK
18-09-2023 (Issue 1)
Installation Instructions
Parts List
Tools Required
| |
---|---|---
ø2.5mm (3/32”)
ø3mm (1/18”)
Drill Bit| ø35mm (1 3/8”)
Hole Saw/Drill Bit| Jig Saw
| |
Pozi Screwdriver| Silicone| Optional: Thread Lock
Material| Drill| Fixing
---|---|---
Soft Material e.g. plywood| 2.5mm (3/32″)| No.6 Screw (Included)
Hard Material e.g. fiberglass, hardwoods, acrylics| 3mm (1/8″)
Metal e.g. Steel, aluminium| 4mm (5/32″)| Recommended
12mm x M4
Countersunk Bolt with washer and Nyloc (Not included)
Cutting Template
For further installation and warranty information please visit: www.scanstrut.com
UK & International
+44 (0)1392531280
[email protected]
USA
+1 860 308 1416
[email protected]
Documents / Resources
|
SCANSTRUT DS-LP-MULTI-S Low Profile Multi Cable
Seal
[pdf] Installation Guide
DS-LP-MULTI-S Low Profile Multi Cable Seal, DS-LP-MULTI-S, Low Profile Multi
Cable Seal, Profile Multi Cable Seal, Multi Cable Seal, Cable Seal
---|---