LAMAX Street2 Wireless Portable Speaker Instruction Manual
- October 30, 2023
- LAMAX
Table of Contents
Street2
Operating Instructions
Street2 Wireless Portable Speaker
1 Micro USB|
---|---
2 AUX|
3 USB|
4 Micro SD Card|
5 Power| Power on / off (hold) Change source (press)
6 PLAY| Play / pause (press) Answer / end call (press), reject (hold), redial
last number dialled (double tap) Unpair (hold)
7 VOL+| Next track (press), increase volume (hold), TWS (double tap)
8 VOL—| Previous track (press), decrease volume (hold)
9 LED| Lights red whilst charging, lights green when fully charged
10 LED2| Flashes while playing or waiting for pairing, lights up in stand-by.
Main Features:
- Total power of 15 W
- IP55 waterproofing
- Built-in 1800 mAh rechargeable lithium battery that can last 23 hours on a single charge
- TWS for pairing with a second identical speaker
Turning On / Off:
Hold the POWER button to turn on the speaker. The LED lights up and a beep sounds. Hold down the same button to turn off the speaker.
Pairing:
- Press and hold the POWER button to turn on the speaker. The LED flashes blue and the speaker is ready to pair.
- Activate Bluetooth connectivity on your phone or other device. Select „LAMAX Street2“ from the list of available devices. If a pairing code is required, enter „0000“ and confirm. When pairing is successful, the speaker emits a beep and the LED lights up blue.
- Playback can be controlled either with a paired device or directly on the speaker itself. While playing, the LED flashes blue.
TWS:
To pair two speakers together, switch on both speakers and make sure they are
not paired with any multimedia device. On one of them, which will act as the
main one, press VOL+ twice in succession, a beep will sound. When pairing is
successful, a second beep sounds and the main speaker acts as the left
channel.
Audio Input:
Connect to the AUX jack via the supplied audio cable to play music from any
device. It is not possible to control songs directly on the speaker itself
when playing back via the audio input.
Handsfree:
The handsfree function is activated when you pair your phone via Bluetooth.
Press PLAY to answer / end the call, hold down PLAY to reject the incoming
call, and tap PLAY twice to redial the last number dialed.
FM Radio: Make sure the audio cable is connected, it serves as an
antenna. Use the POWER button to switch to the FM radio. Hold down the PLAY
button to automatically scan for radio stations. When scanning is complete,
press VOL+ and VOL– to switch between stations.
Charging:
The speaker can be charged using the included USB cable plugged into a
suitable USB device – adapter, PC, power bank. Do not charge the speaker
with a higher input voltage than 5V, the speaker may be damaged. When the
battery is running low, a beep sounds. When charging the light is red, and
turns green when fully charged.
Parameters:
| Speaker Parameters | 2 x 7,5 W, 0 50 mm, 150 Hz – 20 KHz |
|---|---|
| Battery | Li-Ion 1800 mAh |
| Playback Time | up to 23 hours |
| Charging Time | 3 hours |
| Playback Options | Bluetooth, 3.5 mm audio input, microSD card |
| Wireless Technology | Bluetooth 5.0 |
| Waterproofing | IP55 – protection against water spray |
| Dimensions | 195 x 70 x 50 mm |
| Weight | 380 g |
Download the current version of the user manual here: https://beat.lamax- electronics.com/Street2/manuals
https://beat.lamax-electronics.com/Street2/manuals/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>