globe 50582 Smart Desk Lamp User Manual
- June 4, 2024
- globe
Table of Contents
globe 50582 Smart Desk Lamp
Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enjoyment.
SMART DESK LAMP
Check out product videos on our YouTube channel, on the Globe Smart Home – Amazon Certified for Humans playlist!*
SAVE THESE INSTRUCTIONS
CAUTION IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature to reduce the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless the plug can be fully inserted. Do not
alter the plug.
CLEANING :
Before cleaning your lamp, unplug or disconnect the power source. Wipe the
lamp with a soft, damp cloth.
ATTENTION:
If the supply cord is damaged, it must be replaced by the manufacturer or a
similarly qualified person in order to avoid a hazard.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
LIMITED WARRANTY: This smart table lamp is warranted to last 3 years from
the date of purchase based on use of 3 hours per day. If it fails before that
time, we will replace it. Send the light, proof of purchase and register
receipt along with your complete name and address to Globe Electric. See
caution text for proper use. This warranty is void if this product is misused
in any way. This replacement is the sole remedy available and liability for
incidental or consequential damage is expressly excluded. This device is not
intended for use with emergency exit fixtures or emergency exit lights,
photocells and electronic timers.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications made to this product are not expressly approved by the party
responsible and could void the user’s warranty of the equipment.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator and your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference,
- this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
PARTIE RESPONSABLE DE LA FCC
Globe Électrique
2264 East 6th Street
San Bernardino, CA 92410
www.globe-electric.com
Warranty: This product comes with a 3 year product warranty effective from the date of purchase. If the failure of this product is caused by defects in the material or workmanship, it will be repaired or replaced at no charge to you. You must supply a copy of your dated cash register receipt when you request warranty service. Return the product with your cash receipt as proof of purchase prepaid to Globe Electric Company Inc. Globe reserves the right to repair or replace the product at its option. Repair or replacement, as described above, shall be the sole remedy to the customer and there shall be no liability on the part of Globe for any special, indirect, incidental or consequential damages, including but not limited to any loss of business or profits, whether or not foreseable. Some jurisdictions may not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any modification to this product or failure to comply with safety instructions will void the warranty.
FEATURES
- LED integrated – dimmable through the app
- RGB: Choose from a full spectrum of colors
- Tunable white (2200 K – 5000 K): Choose from a focused bright white to a relaxed sunset glow
- ON/OFF touch switch
- Manually or remotely control your light with the Amazon Alexa app
- Pair with Amazon Echo to control your light through voice commands
- Set schedules and control your light from anywhere
SPECIFICATIONS
| 630 lumens (at 5000 K) | 9 watt |
|---|---|
| Lasts 50,000 hours | Wireless Type: 2.4GHz |
| 120 V · 60Hz | CRI 90 |
Since 1932, Globe has taken pride in offering products of the highest quality,
and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to
offer us your valuable feedback, you may contact us in the following ways:
Toll Free Telephone: 1-888-543-1388
(North America Only) / Toll Free Fax:
1-800-668-4562
(North America Only)
E-Mail: info@globe-electric.com
Mail: Globe Electric Customer Service Department
150 Oneida, Montreal, Quebec, Canada H9R 1A8
Please visit our website to discover other quality Globe products: http://www
.globe-electric.com
PRE-INSTALLATION
Planning Installation
Compare all parts with the “Hardware Included” section. If any part appears
missing or damaged, do not install this product and contact the Customer
Service team at 1-888-543-1388 or
e-mail to info@globe-electric.com.
Hardware Included
NOTE: Hardware is not shown to actual size.
| Item | Quantity |
|---|---|
| LED lamp | 1 |
| polarized plug | 1 |
CONNECTING INSTRUCTIONS
-
Download the Amazon Alexa app.
-
Power on your device.
Ensure your device has been installed correctly by following the instructions in the “Installation” section. -
Scan barcode
- Launch the Amazon Alexa app.
- Select “Add a Device.”
- Select “Light,” locate Globe Electric and follow the in-app instructions on how to scan the 2D barcode.
Please note: The device is automatically in pairing mode for 5 minutes once powered on. If it does not turn on within 5 minutes, turn the device OFF and ON again to re-enter pairing mode.
Don’t have a barcode?
Select “Don’t have a barcode?” in the Alexa app and follow the in-app
instructions on how to connect without a 2D barcode.
How to factory reset device
If you are struggling to set up your device, or if the device was already
connected to a network, perform a factory reset by following the instructions
below:
- Turn device ON for 10 seconds by connecting the power adapter.
- Turn device OFF and ON 5 times by disconnecting and re-connecting the power adapter. The light will flash RED and then the light will change to WHITE. When the light changes to WHITE, this means the factory reset mode was successful.
- Scan the inner barcode (located in the instruction manual) and connect within 5 minutes. If you fail to connect within the 5-minute time frame, turn device OFF and ON again once to re-enter pairing mode.
The light will flash WHITE to indicate that the pairing was successful.
Please keep these instructions in a safe place. This is the only duplicate of the unique QR code for your product. You may need it to reconnect the product to your account or transfer it to another account.
FUNCTIONALITY
Voice control with Alexa
- ON/OFF
- Dimming
- Shades of white
- Colors
- Moods
Using the Amazon Alexa app on a mobile device
With the Amazon Alexa app, you can easily manage your home set-up and directly
control your Globe Electric lights.
- ON/OFF
- Dimming
- Shades of white
- Colors
- Out of home control
- Add your lights to Alexa Routines
- Add your lights to Alexa Guard
*Check out product videos on our YouTube channel, on the Globe Smart Home – Amazon Certified for Humans playlist!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>