ACCUTIME I8PRO Smart Watch User Manual

ACCUTIME I8PRO Smart Watch User Manual

Adapt to platform requirements

Android 5.0 and above mobile phones
IDS 9.0 and above mobile phones
Support Bluetooth BT 3.0

APP download method:

1. .105/Android pho门e use厄：scan the above QR code to download and install the application
2. Android: Search for ”H「yFine“ throughthe application
3. . Apple: Search for “HryFine＇’ App through thestore to download and install the app.

Initial use

To ensure the normal use of the watch, please charge it first. The contact of the charging clip connected to the power supply can be charged with the contact on the back of the watch. Note: The reverse contact point will cause the battery to short-circuit.

Watch and APP connection

•  The permissions during the APP installation process are fully agreed and the watch and the mobile phone must be connected to the APP and the mobile phone Bluetooth to achieve all functions.

APP connection method:

open the APP and mobile phone Bluetooth, the APP reminds you to enable the notification IS to confirm. Click

• add a device search • the device name and click • to • to the
  watch device. • Mobile phone Bluetooth onnection: Bluetooth must be turned • on the watch side enter the mobile • • – :luetooth search for the Bluetooth device of the model name and click Connect to pair. •Simple solution to common Bluetooth problems: Due to the lack • uniformity in the Bluetooth protocol of various

mobile phone brands sometimes the Bluetooth connection

between the mobile phone and the watch may be unstable. You can turn off the Bluetooth of the mobile phone and reconnect it again, or reset the watch to the factory settings, such as
The watch is in a dead state, you can press and hold the power button for 10 seconds to restart the watch. • How to connect BT3.0 Bluetooth: Enter the Bluetooth terminal of the mobile phone and search for Hry3.0 binding. • How to verify that the Bluetooth

connection is successful:

The bluetooth icon in the upper left corner of the main menu is oval to indicate that the Bluetooth connection is successful.
Use the watch to click to find the phone or enter the APP to find the watch. If there is vibration, it means that theAPP is connected successfully.

Watch operating in structions: •

Power button: Up key:  short press to enter menu and return, down key: wake up/turn off the screen and long press for power on and off and restart

Clock interface:

Swipe left and right on the dial interface to preview or switch dials, swipe up on the quick notification bar interface, and swipe down to enter the message notification list

Watch function introduction •Standby interface:

enter the standby interface. • Dial pad: connect to the mobile phone to dial out via Bluetooth, and you can make a call on the watch side.
• Contact: After the bracel et is successfully connected to the APP, you can add a contact in the APP. After the contact is successfully added, the phone book of the bracelet will be displayed synchronously. Click the contact in the phone book on the bracelet to make a call (Note: The bracelet needs

Connect mobile phone Bluetooth).

• Call record: can display the call record of the wristband, click the phone number to dial.

Information:

The content  of the message push can be displayed. • Movement:Enter the sports mode (running, walking, cycling, mountain climbing) selection interface, click again to start the data monitoring of the corresponding sports mode: exercise time, distance, calories burned; •
Pedometer: Calculate your step count data for the day, clear the data at 00:00 in the morning, and view it in the APR • Sleep monitoring: Turn on sleep detection to
monitor the quality of sleep while sleeping. • Sedentary reminder: Set the sedentary time, the bracelet will vibrate when the time is up, and the interface will display a reminder. • Bluetooth camera: When the phone cannot be locked, the watch enters Bluetooth to take a photo when the app interface is opened, the phone will automatically pop up the camera interface, click on the watch to take a photo, the phone will take a photo and store the photo on the

Common problem:

Can’t find the watch? • Answer: Because the Bluetooth broadcast of the watch has not been searched by the mobile phone, please make sure that the watch is powered and activated, and is not connected by other mobile phones. Move the watch close to the mobile phone and search again. If it still does not work, turn off the bluetooth of the mobile phone and turn it on again after 20 seconds. Bluetooth searches again.

Is the Bluetooth connection always on? Will there be any data if it is turned off? • An swer: Before synchronizing the data, the exercise and sleep data will remain on the watch host. When the Bluetooth connection between the mobile phone and the watch is successful, the watch will automatically upload data to the mobile phone, but the d ata stored by the watch is limited. It can only store Bluetooth data for about one week. When the space is full, the oldest data will be automatically overwritten to generate the latest data, so please Sync your watch to your phone in time. Note: If the call and SMS reminder function is turned on, you need to keep the Bluetooth connected, and the alarm clock reminder supports offline. What should I do if the watch cannot be charged? 1. Please make sure that the direction of the charging s tand is correct and the charging dip is in good contact with the watch.
2,When the power of the watch is lower than 3.6V, there will be a period of battery precharging time. Remarks: It will enter the chargingstate immediately after the charger is plugged in. If there is no display, you need to cha rge for 3-5 minutes to enter the charging state. •Will the watch cause harm to the human body if worn for a long time? Answer: The radiation of the equipment is much lower than the FCC standard of the United States, which is basically negligible. Long-term wearing will not ca use radiation damage to the human body.
Mk doles compile with Pan 15 of dm ICC Was. (*melon Is subject to the %Mowing two condldonm anis dodos may noise hamlet IMerfamnak and (2)Th1 date mod wan any Interfamme meted, Wading Madman°a dim may caire endmired opwadon. FIX10mIlidon Ewan Statement The date has bean mminatad to mast postal,/ spars mminernant 11

*Amain be aid In ponabie opts condldon without mankdon.

Malang Starant Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment
This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Roles.
These limits are designed to provide reasonable protection against harmful interference in a residential Installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions, may cause harmful interference to radiocomnwnkatlons. However, there is no guarantee that Interference will not occur In a particular Instaibtion. If this equipment does cause harmful interference to radio or television reception, which can be determined by to ruing the equipaent off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receigng awe na – –
Increase the separation between the equipment and receive. – – Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected. – – Consult the dealer or an experienced ralkil 7Vtechnician for help.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>