greenworks SC120 Surface Cleaner User Manual
- June 5, 2024
- Greenworks
Table of Contents
greenworks SC120 Surface Cleaner
WARNING: It is important to read and understand the instruction manual before you operate this accessory.
SAFETY INSTRUCTIONS
WARNING
Please read and comply with these original operating instructions prior to the
initial operation and store them for later use or subsequent owners.
- Please read the safety instructions of your pressure washer.
- Make sure there are no persons in the immediate vicinity of the cleaning head.
- Turn off the pressure washer when you finish cleaning.
- Maximum water temperature 104 °F (Please read the instructions of your pressure washer).
- Wear eye protection with side shields that are marked to comply with ANSI Z87.1 when operating this equipment.
- After use or before servicing, always disconnect the surface cleaner from the pressure washer spray wand.
WARNING
Do not hold the edge of the surface cleaner when it is on.
PRODUCT INFORMATION
If any parts are damaged or missing, please call 1-888-90WORKS (888.909.6757) for Greenworks customer service.
PRODUCT SPECIFICATIONS
- Connection 1/4 in. Quick Connect Plug Inlet
- Cleaning With 12 in.
- Maximum Pressure Up to 2300 PSI
- Maximum Water Flow 2.3 GPM
- Maximum Water Temperature 104°F
- 1/4 in. Quick Connection
- Casing
- High Pressure Nozzle
- Rotor Arm
PROPER USE
This surface cleaner can be used on various materials, including plastic,
concrete, tiles, natural stone, and more.
APPLICATION
CLEANING FLOOR SURFACE
Fastern the surface cleaner to the high pressure 1/4 inch quick connect
spray wand.
- Pull back the quick-connect collar
- Push the surface cleaner into place
- Push the collar forward.
- Pull the trigger gun to operate the machine
TIPS FOR CLEANING
- Outdoor surfaces should be swept before the surface cleaner is used to avoid damaging the high pressure nozzles.
- The surface cleaner is not suited for scouring or scrubbing.
- If striping or swirl marks occur, slow your pace. If striping or swirling continues, the surface cleaner nozzle(s) may be clogged. Disconnect surface cleaner from pressure washer spray wand before servicing. Using a straightened paper clip or nozzle cleaning tool (not provided), free any foreign materials clogging or restricting the nozzle.(See Fig.3)
CAUTION
Do not run over free standing corners. DO NOT lift or tilt the surface cleaner
from a horizontal surface while connected to the spray gun during operation.
GENERAL INFORMATION
ENVIRONMENTAL PROTECTION
The packaging material can be recycled. Please do not place the packaging
into the ordinary trash for disposal, but arrange for the proper recycling.
Old appliances contain valuable material that can be recycled. Please arrange
for the proper recycling of appliances. Please dispose of your old appliances
using the appropriate collection system.
CARE
Use a moist cloth to clean surface cleaner after use.
WARRANTY
GREENWORKS hereby warranties this product, to the original purchaser with proof of purchase, for a period of three (3) years against defects in materials, parts or workmanship. GREENWORKS, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for units which have been used for personal use that have not been hired or rented for industrial/commercial use, and that have been maintained in accordance with the instructions in the owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
- Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or
- The unit, if it has not been operated and/or maintained in accordance with the owner’s manual; or
- Normal wear, except as noted below;
- Routine maintenance items such as draining the water to avoid freezing/ice damage to pump and components.
- Normal deterioration of the exterior finish due to use or exposure.
GREENWORKS HELPLINE (1-888-90WORKS):
Warranty service is available by calling our toll-free helpline, 9am to 5pm
EST. at 1-888-909-6757 (1-888-90WORKS).
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power equipment unit or
attachment are the responsibility of the purchaser. It is the purchaser’s
responsibility to pay transportation charges for any part submitted for
replacement under this warranty unless such return is requested in writing by
GREENWORKS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>