GOLDEN LIGHTING 8320-FM BLK-EWB Flori 4 Light 15 Inch Matte Black Flush Mount Ceiling Light Instruction Manual
- June 2, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 8320-FM BLK-EWB Flori 4 Light 15 Inch Matte Black Flush
Mount Ceiling Light
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by accredited professionals.
- Shut off the power supply at the fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag that holds all of the parts. See the important notes above. Shut off power at the circuit breaker and remove the old fixture from the wall, including the old mounting strap. 1. From the parts bag remove the mounting strap (A) assembly. Nipple (F) should be attached to mounting strap (A) with washer (C) and hex nut (D) in place. Attach mounting strap (A) to the junction box using mounting screws (B) and a screwdriver. Tighten securely. Pass the canopy (G) over the nipple (F) to test the height. Remove the canopy (G) and adjust the height of the nipple (F) until the desired height is reached.
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation. Please proceed to the next step.
CONNECTING THE WIRES
Have an assistant support the fixture’s weight while completing the wiring. Refer to the wiring diagram and attach the fixture’s wires to the power supply wires from the junction box. Attach the fixture’s wires to the power supply wires from the junction box. Connect Hot to Hot (transparent wire with black inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with white inner thread, white, or ribbed wire), and Ground to Ground (transparent wire with green inner thread, green wire, or copper). Twist the ends of the wire pairs together, and then twist on a wire connector. Make sure all twists are in the same direction. If there is no house ground wire coming from the junction box, locate ground screw (E) on the mounting bracket/mounting strap and wrap the fixture’s ground wire around the ground screw. Use a screwdriver to tighten the top of the ground screw (E) onto the wires and into the mounting bracket/mounting strap. Tuck the wires into the junction box.
How to Identify the Fixture’s Wires
- Hot: Smooth, Black, or Transparent with Black Inner Thread
- Neutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
FINISHING THE INSTALLATION
Lift canopy (G) up to the ceiling over mounting strap (A) until nipple (F) protrudes from the center hole in the canopy (G). Tightly thread decorative nut (I) onto the exposed threads of nipple (F) to secure canopy (G) in place. Tighten until the canopy (G) is snug against the ceiling. 4. Slide candle sleeves (J) over sockets (K). Install light bulbs (not provided) in accordance with the fixture’s specifications. 5. Remove the plastic protective covering from wood bead strands (L). After removing the plastic protective covering, gently smooth out any kinks in the wood bead strands (L). Do not exceed the maximum recommended wattage. Your installation is now complete. Turn on the power and test.
DIMENSION
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of the island. Fixtures should hang at least 30″ above the
countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table.
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for
any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert lighting advice. To help create the perfect look, visit www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social.
- Facebook: @GoldenLighting
- Instaram: @GLFixtures
- Twitter: @GoldenLighting1
- Pintrest: @GoldenLighting
Get help and quick tips, and explore curated content
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>