CO-Z V20220818 Self Winding Double Watch Rotator Box User Manual
- June 15, 2024
- CO-Z
Table of Contents
CO-Z V20220818 Self Winding Double Watch Rotator Box
Product Information
Specifications
- Power Cord: Included
- Input Power: [Input Power]
- Output Power: [Output Power]
- Compatible Battery Type: [Compatible Battery Type]
- Watch Capacity: [Watch Capacity]
- Turntable Diameter: [Turntable Diameter]
- Cushion Size: [Cushion Size]
- Dimensions: [Dimensions]
- Net Weight: [Net Weight]
Product Usage Instructions
Safety Information
Warning! This mechanical watch winder maintains the service of active
watches but CANNOT by itself restart completely stopped ones. Manually wind
any such stopped watches before placing them on the winder. Similarly, this
winder’s turntable is bidirectional, alternating between clockwise and anti-
clockwise rotation. It is unsuited for use with watches with a unidirectional
bezel, such as most premier diving watches.
Operation
- Open the cover of your watch winder and take out one of the cushions.
- Loosen your watch strap, place the watch on the cushion wrapping the strap around it, and refasten the strap.
- Fit the cushion back into place on its turntable.
- Repeat as needed, using only one watch per cushion. Close the cover.
- Connect the winder to a stable compatible power source using the provided power cord or fit 2 AA batteries (not included) into the compartment at the bottom of the device.
- Flip the power switch on the back of the winder to “I”. The turntable will rotate clockwise for 2 minutes, pause for 6 minutes, rotate anti-clockwise for 2 minutes, and pause for 6 minutes again before restarting the cycle. For best results, rotate your watches for at least 3 hours each time.
- When finished, turn off the turntable by flipping the power switch to “O”. Unplug it if using a wall socket or extension cord.
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and
we’ll resolve your issue ASAP!
FAQ
-
Q: Can I use this watch winder with diving watches?
A: No, this watch winder is unsuited for use with watches with a unidirectional bezel, such as most premier diving watches. -
Q: How long should I rotate my watches on the winder?
A: For best results, rotate your watches for at least 3 hours each time.
Disclaimer
This mechanical watch winder maintains the service of active watches but CANNOT by itself restart completely stopped ones. Manually wind any such stopped watches before placing them on the winder. Similarly, this winder’s turntable is bidirectional, alternating between clockwise and anti-clockwise rotation. It is unsuited for use with watches with a unidirectional bezel, such as most premier diving watches.
Safety Information
Warning
- ONLY use this device on stable level surfaces.
- DO NOT place this device near any flammables or explosives.
- DO NOT let children or persons with compromised physical or mental capabilities use this device without close supervision.
- DO NOT get this device wet or operate it with wet hands.
- To use an external power source, make sure it is stable and compatible with this device. ONLY use the provided power cord with this device and unplug it between uses.
- Store out of the reach of children.
Specifications
| Power Cord | Input Power | 100–240 V~ 50/60 Hz |
|---|---|---|
| Output Power | 3V 1.2A | |
| Compatible Battery Type | 2 × AA | |
| Watch Capacity | 2 | |
| Turntable Diameter | 12.5 cm | 4.9 in. |
| Cushion Size | 6.2 × 4.2 × 3 cm | 2.4 × 1.9 × 1.2 in. |
| Dimensions | 18.2 × 18 × 20.8 cm | 7.2 × 7.1 × 8.2 in. |
| Net Weight | 1.9 kg | 4.2 lb. |
Package List
| Item | Name | Qty. |
|---|---|---|
| A | Watch Winder | 1 |
| B | Power Cord | 1 |
| C | Cleaning Cloth | 1 |
| D | Fabric Bag | 1 |
Product Diagram
Operation
- Open the cover of your watch winder and take out one of the cushions. Loosen your watch strap, place the watch on the cushion wrapping the strap around it, and refasten the strap. Fit the cushion back into place on its turntable.
- Repeat as needed, using only one watch per cushion. Close the cover.
- Connect the winder to a stable compatible power source using the provided power cord or fit 2 AA batteries (not included) into the compartment at the bottom of the device.
- Flip the power switch on the back of the winder to I. The turntable will rotate clockwise for 2 minutes, pause for 6 minutes, rotate anti-clockwise for 2 minutes, and pause for 6 minutes again before restarting the cycle. For best results, rotate your watches for at least 3 hours each time.
- When finished, turn off the turntable by flipping the power switch to O. Unplug it if using a wall socket or extension cord.
Maintenance
- Clean the exterior of your watch winder with the provided cloth as needed. Do not use abrasive cleaners or caustic chemicals.
- If any part of the winder is damaged or shows signs of malfunction, have it repaired or replaced before further use.
- If the winder will not be used for a prolonged period of time, cut off its power before storing in a cool dry place away from direct sunlight and inaccessible to children.
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and
we’ll resolve your issue ASAP! For a .pdf copy of the latest version of these
instructions, use the appropriate app on your smartphone to scan the QR code
to the right.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>