MokerLink EXT104GAF PoE Extender User Manual
- June 13, 2024
- MokerLink
Table of Contents
MokerLink EXT104GAF PoE Extender
Overview
Solving the problem of power supply and long‑distance network in monitoring project and wireless coverage project, our one input and one output/multi‑extension device can realize up to 400 meters network and power transmission with power supply that is convenient for various engineering wiring. Besides, it adopts standard 12+36‑power mode output and standard power‑receiving mode input.
Features
- Support PoE standard:IEEE802.3af/at.
- Support common PoE standard: IEEE802.3af/at(optional 45+78‑ non‑standard power supply).
- Single port power:30W.
- Supports power supply for PoE devices like AP and network surveillance cameras through Cat5/6 fast ethernet cables.
- Flow control method: full duplex adapts IEEE802.3,halfduplex adapts Back pressure.
- Port supports Auto MDI/MDIX.
- Port supports lightning protection(secondary level requirements).
- Exchanging Mechanism: store and forward.
- Zero configuration: automatically supply for adaptive devices.
- Panel indicator monitors operating status and helps fault analysis.
Product Display
-
EXT‑104GAF, 410/100/1000M PoE port + 1power-receiving port
-
EXT‑102GAF, 210/100/1000M PoE port + 1power‑receiving port
Function Switch(1 in 4 out ethernet extender)
Mark | Mode | Description |
---|---|---|
N | Standard Norma | All ports communicate freely, adapting to common data |
transmission
environment
S| Super Mode| Downlink
speed
limitation
10M(Super
transmission:250
meters)
V| Port Isolation| Downlink
isolateing
from
each
other, uploads
and
downloads
data
through
uplink
Function Switch(1 in 2 out ethernet extender)
Mark | Mode | Description |
---|---|---|
EXT | Port Isolation | Isolated downlink ports access each other to prevent |
network storm
Output mode selection Switch
1、2Down 3、4Up | 1、2Up 3、4Down | 1、2、3、4 Down | 1、2、3、4 Up |
---|---|---|---|
12+36-output mode | 45+78- output mode | 8 chips output mode | Only network |
extension
Indicator
Indicator | Status | Description |
---|---|---|
Power LED:PWR | Always ON | Normal |
Always OFF | Power Unconnected | |
Super mode LED Super | Always ON | Super mode ON |
A | Always ON | 1236 power supply |
B | Always ON | 4578 power supply |
PoE LED | Orange | Always ON |
normally
Always
OFF| No
powered
equipments
connected
or
no
power
supply
Green| Always
ON| Network signal communicates
at
corresponding ports
Always
OFF| Network signal
not
communicate
at
corresponding ports
Accessories List
-
1*Switch
-
1*User Manual +Warranty Card
-
Optional power
Installation and attentions
For the safe installation operation of switch, suggestion:
Check up that the power wire is securely wrapped into the AC power connecto or
not.
Ensure the adequate heat dissipation and ventilation around the switch.
Do not stack heavy objects on the switch.
Desktop
When
installing
the
switch
on
the
desktop,
The
device
must
be
placed
flat
on
the
table
or
on
the
ground. Please
leave
aside
between
the
device
and
other
surrounding
objects.
Specification
of
power
receiving
The
extender
receives
power
by
inserting
Cat5/6
network
cable
into
PoE
switches
or
injectors. Please
check
before
operation.
Application
1 in 4 Out Gigabit Extender Option EXT‑104GAF
1 in 2 Out Gigabit Extender Option EXT‑102GAF
Parameter
Model | EXT‑104GAF | EXT‑102GAF |
---|---|---|
Product | 4 Port Gigabit PoE Extender | 2 Port Gigabit PoE Extender |
PoE
power‑
receiving
port| Standard
PoE:IEEE802.3af/at Max
received
power:30W
PoE
output
port| 1/2(+) 3/6(‑)
Output
power: MAX
30W/port
Function| V:(Port
Isolation)+S:(Super
Mode)| EXT:
Port
Isolation
Watt| Standby
power
Consumption:≤5W;
Full‑load
power
Consumption:≤30W/90W;| Standby
power
Consumption:≤3W;
Full‑load
power
Consumption:≤30W
DC
Input| As
network
extender:
DC9‑57V
MAX
0.5A
As
PoE
network
extender:DC37‑57V
MAX
0.5A
Network
Protocol| IEEE802.3
IEEE802.3i
10BASE‑T;
IEEE802.3u100BASE‑TX;
IEEE
802.3ab1000BASE‑T
IEEE802.3x
IEEE802.3af/at
LED
Indicator| P : Power
LED
V : Port Isolation LED
S : Super
Mode
LED
Port: (Orange=PoE
LED +Green=Link
LED)| Pwr: Power
LED
Port:(Orange=PoE
LED+ Green=Link
LED)
ON/OFF: EXT
function
LED
Link: Network
connection
LED)
Power| 1 Defaulted
configuration:
No
power
2 optional
12V
0.5A
power
as
network
extender
3 optional
52V
0.5A
power
used
for
single
port
PoE
switch
Port| 1PoE
input
port,10/100/1000M
Rj45
adaptive
4PoE
output
port 10/100/1000M
Rj45| 1PoE
input
port,10/100/1000M
Rj45
adaptive
2PoE
output
port 10/100/1000M
Rj45
Transmission
Mode| Store
and
Forward(full
wirespeed
Bandwidth| 12Gbps
Packet
Forwarding| 7.2Mpps
MAC
Address| 2K
Buffer| 2.5M
Transmission
Distance| 10BASE‑T :
Cat3,4,5
UTP(≤250
meter)
100BASE‑TX
:
Cat5
or
later
UTP(150
meter)
1000BASE‑TX
:
Cat6
or
later
UTP(150
meter)
Operating
Temperature/
Humidity| ‑10 +55°C 5% 90%
RH
Non
coagulation
Storage
Temperature/
Humidity| ‑40 +75°C 5% 95%
RH
Non
coagulation
Product
size
/Packing
size
(LWH)| 140mm80mm28mm
215mm175mm45mm| 70mm85mm25mm
105mm105mm63mm
N.W/G. W (kg)| 0.3kg/0.4kg| 0.15kg/0.2kg
Installation| Desktop
Lightning
protection
level| 3KV
8/20us
Ip30
Attentions
To avoid equipment damage and personal injury caused by improper use, please follow the precautions as below:
- Keep the status of power‑off during installation, and wear anti‑static wrist to ensure good contact between anti‑static wrist and skin to avoid the hidden danger.
- The extender can only operate normally under the correct power receiving mode. Please confirm that the power‑receiving voltage is consistent with the voltage marked on the extender.
- Before the extender power receiving, please make sure that it will not cause overload of the power circuit, so as not to affect the normal operation of the extender or even unnecessary damage
- In order to avoid the danger of electric shock, do not open the shell up when the extender works, even in the case of no live current, do not open.
- Before cleaning the extender, please disconnect the network cable first. Do not wipe it by using wet fabrics or liquid.
- Don’t place other heavy objects on the surface of the extender to avoid accidents.
Customer Support
Get
help
or
claim
warranty Visit
Here:
http://www.mokerlink.com/support/ or
Scan
QR
Code
Wuhan MokerLink Technology Co., Ltd
Rm 10, 13/F, Main Building 7, Changhang Lanjing International
No. 116 Gaoxin Ave., Hongshan Dist., Wuhan, China
http://www.mokerlink.com
support@mokerlink.com