GOLDEN LIGHTING 4855-BA1 Galveston 9 Inch Wall Sconce Instruction Manual
- May 15, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 4855-BA1 Galveston 9 Inch Wall Sconce
Specifications:
- Model: 4855-BA1 BLK-CLR
- Fixture Type: Pendant Light
- Dimensions: 8′ x 30′
Product Usage Instructions:
-
Pendants & Linear Pendants Above a Kitchen Island:
Center a linear pendant over the island. If hanging pendants,use one pendant for every 24 inches of island. Fixtures should hang at least 30 inches above the countertop. -
Pendants & Chandeliers Above a Dining Room Table:
Fixtures should stay at least 30 inches above the table. Use a fixture that is 12 inches narrower than the width of the table. -
Pendants and Chandeliers in Open Areas:
The bottom should hang at least 7.5 feet from the floor. Allow clearance for any opening doors.
Additional Tips:
Great lighting can add value and enhance the look of your home.
To ensure the best lighting in your space, remember to layer your lighting.
This ensures that your space will have both task and ambient lighting.
Coordinating fixtures like sconces, flush mounts, and pendants can help you
meet your layered lighting needs and reinforce your desired aesthetic. Install
the lights with dimmers that allow you to control the level of light output at
any given moment.
Get function and style! Browse our site for coordinating lights and expert lighting advice. To help create the perfect look, visit www.GoldenLighting.com.
Assembly Instructions:
No Assembly Required – This item arrives assembled and ready for installation.
Thank You for Choosing Golden Lighting for Your Lighting Needs!
DIMENSION
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of island. Fixtures should hang at least 30″ above the
countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table.
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for
any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert lighting advice. To help create the perfect look, visit www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social.
Assembly Instructions
How to Identify the Fixture’s Wires
- Hot: Smooth, Black, or Transparent with Black Inner Thread
- Neutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Get help, quick tips, and explore curated content
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power
at the circuit breaker and remove old fixture from wall, including the old
mounting strap. PLEASE NOTE: This fixture may be mounted with the sockets and
glass facing up or down. Please decide how you would like the fixture to be
hung and turn the backplate accordingly. 1. From the parts bag remove the
mounting strap (A) assembly. Mounting strap (A) contains several pairs of
threaded holes and a set of mounting screws (B). Find the pair of holes that
matches the spacing of the holes on the junction box and your fixture’s
backplate. Place mounting strap (A) over the junction box and secure mounting
strap (A) to the junction box using mounting screws (B) and a screwdriver.
Tighten the screws securely. Pull house wires through the center of the
mounting strap (A).
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
Have an assistant support the fixture’s weight while completing the wiring.
Refer to the wiring diagram and attach the fixture’s wires to the power supply
wires from the junction box. Attach the fixture’s wires to the power supply
wires from the junction box. Connect Hot to Hot (transparent wire with black
inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with
white inner thread, white, or ribbed wire), and Ground to Ground (transparent
wire with green inner thread, green wire, or copper). Twist the ends of the
wire pairs together, and then twist on a wire connector. Make sure all twists
are in the same direction. If there is no house ground wire coming from the
junction box, locate ground screw (E) on the mounting bracket/mounting strap
and wrap the fixture’s ground wire around the ground screw. Use a screwdriver
to tighten the top of ground screw (E) onto the wires and into the mounting
bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION
Place the fixture backplate (D) over mounting strap (A). Align the holes in
backplate (D) with the holes found on mounting strap (A). Insert side screws
(C) into the holes found on backplate (D) and mounting strap (A). Tighten
screws until backplate (D) is secure to mounting strap (A) and the fixture is
snug against the wall. 4. Slide shade (G) over socket (F) and secure using
socket ring (H). 5. Install light bulb (not included) to the socket in
accordance with the fixture’s specifications. Do not exceed the maximum
recommended wattage. Your installation is complete. Turn on the power and test
the fixture.
FAQ
How do I identify the fixture's wires?
The fixture wires are labeled as Hot, Neutral, and Ground. Make sure to match them with the corresponding house wires (Fils de la Maison/Cables De La Casa).
What is the recommended height for pendant lights above a kitchen island?
For pendant lights above a kitchen island, they should be centered over the island and hang at least 30 inches above the countertop. If using multiple pendants, use one pendant for every 24 inches of the island.
Can I use dimmers with these fixtures?
Yes, it is recommended to install the lights with dimmers that allow you to control the level of light output according to your preference.
Where can I get replacement parts?
Contact the place of purchase for customer service to arrange for replacement parts.
@GoldenLighting
@GLFixtures
@GoldenLighting1
@GoldenLighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>