Sengled B1G G8EX Multicolor Light Strip User Guide
- June 3, 2024
- Sengled
Table of Contents
Sengled B1G G8EX Multicolor Light Strip
Specification
- COLOR: Rgbw (Red, Green, Blue, White)
- BRAND: Sengled
- INDOOR/OUTDOOR USAGE: Indoor
- SPECIAL FEATURE: Weather resistant
- LIGHT SOURCE TYPE: LED
- POWER SOURCE: Corded Electric
- LIGHT COLOR: Multicolor
- OCCASION: Christmas
- MATERIAL: Synthetic Polymer (PMMA)
- COLOR TEMPERATURE: 6500 Kelvin
- CONTROLLER TYPE: App Control, Voice Control
- CONNECTIVITY PROTOCOL: Bluetooth, Wi-Fi
- NUMBER OF LIGHT SOURCES: 450
- VOLTAGE: 240 Volts
- WATTAGE: 6 watts
- ITEM WEIGHT: 3 Pounds
Introduction
Smart led strip lights are a terrific alternative for unusual placements including beneath kitchen cabinets and islands, along bedroom walls, or lining a fireplace mantle or stairway. They are ideal for bringing job lighting or accent color to any room. Cut the 5M (16.4ft) strip along the pre-marked lines to get the ideal length. The local area is covered in connectivity thanks to Bluetooth Low Energy (BLE) Mesh 5.0, which also enables whole-home deployments. Each light acts as a signal repeater, allowing control of Bluetooth lights that are farther away from the Alexa Echo device.
With smart lighting, you can effortlessly manage the lights with voice commands or a smartphone app to change the brightness or color, make timetables, or establish routines. Use the Alexa app and your compatible Amazon Echo device. Lacking an Echo device? Get the Sengled Bluetooth Mesh application (local control only). Red, green, and blue LEDs are combined with a dedicated white LED to create RGBW, which offers up to 16 million different colors and excellent brightness. This combination produces the best performance and vibrant, lifelike colors. The Bluetooth led lights are protected from deterioration by a clear epoxy covering that is moisture-proof and protective against abrasion. The strip contains a strong 3M peel-and-stick adhesive on the back for simple mounting on any surface.
WHAT’S IN THE BOX
- Adapter 24V0.9A*1
- Light strip 5m*1
- Controller*1
- User guide*1
HOW TO SETUP
- Alexa, is your software up to date on your Echo device?
- Turn on your Alexa light strip by plugging it in. Now tell Alexa to find devices.
- Alternately, go to Devices in the Alexa APP to connect.
HOW TO INSTALL
- Add a gadget. Within the Sengled Home app, add a Wi-Fi bulb. Enter your 2.4 GHz Wi-Fi network’s password here.
- Couple With Wi-Fi. Install the bulb and turn it on. Connect to the lightbulb by going to the Wi-Fi settings on your device.
- Connect and take charge. The pairing will start once you get back to the Sengled Home app.
HOW TO USE
Hold the button down to cycle between the colors of the light strip, then let go to choose a color. Whites can be changed using the Sengled Home app’s white palette, voice control, and outside parties. Using the Sengled Home app’s color palette, voice control, and third parties, you may choose from 16 million different shades.
FAQs
Can I connect a 2M light strip to a 10M light strip?****
Yes, you can connect a 2M light strip to a 10M light strip.
How long can this light strip be used?****
25,000 hours, three-year warranty.
Can it work at 120V?****
Yes, the working voltage range is 110-240V.
Are Alexa devices compatible? mine is echo show.****
Most of them are fine, Excluding Echo 1st Gen and Echo Dot 1st Gen.
What type 90° corner adaptor can I use with this strip?****
If your wanting to cut it and connect it to a corner connector, I don’t think you’ll find a connector to fit the strip. They have a thick waterproof coating making finding connectors hard. I gave up. The instructions do say the strip can’t be cut. They can but finding a connector is difficult.
I don’t have Alexa I downloaded the app but does not work why?****
You will not be able to connect without a physical Alexa/Echo. Try to download the Sengled Bluetooth app.
Can the lights be scheduled (probably via the app) to automatically turn on and off at specific times?****
Yes, it can be scheduled either in the app or through Amazon or Google. I setup a routine for mine through Amazon.
Can I connect more than one set in same room and use same controller to control multiple sets for large room?****
What is the wattage?****
The 16.4ft Bluetooth strip light supports to be powered by 21.6w.
Does this Bluetooth LED lights have a white light effect?****
Yes, this Bluetooth LED light has a white light effect.
Does this fit with my 42 “ tv ?****
Probably more than enough.
Do these lights have a black light effect?****
Sort of. In the room we set them up in, the lights do interact with many of our black light-interactive items, but compared to our actual black light it does not work as well. It will not show things like carpet stains but it will interact with glow in the dark items.
Do these have a lightening setting?****
Yes, you can adjust the brightness of the light.
Does this Bluetooth light have an extension strap?****
No, this lamp comes in different sizes of 2M, 5M, and 10M.
Do I need the sengled app to control brightness, color, etc. or can it all be done via the Alexa app? or does this work with smartlife app?****
Sengled Bluetooth light strip is compatible with Alexa only, you can download the Sengled Bluetooth APP to control the light strip, or you can control it through Alexa voice.