OVELA OVWILLWBSNA William Wood Bed User Guide
- June 9, 2024
- OVELA
Table of Contents
OVELA OVWILLWBSNA William Wood Bed User Guide
COMPONENTS
Hardware
ASSEMBLY
Step 1: Align one part labelled 3 with parts labelled 1 and 2. Using the Allen key (H), secure the part labelled 3 to parts labelled 1 and 2 with 50mm M6 screws (A). Repeat this process with the remaining parts labelled 1, 2 and 3. This will create two end assemblies.
Note:
Do not use power tools to assemble this bed as it may damage the components.
Step 2: Align one each of the parts labelled 4 and 5 with one part labelled 6. Using the Allen key (H), secure the pieces (4, 5, 6) together with 35mm M6 screws (B). Repeat this process with the remaining parts labelled 4, 5 and 6. This will create two side assemblies.
Step 3: Connect the holes on the side assemblies to those on the end assemblies using the dowels (C)
Step 4: Using the Allen key (H), secure each corner of the side and end assemblies with 50mm M6 screws (A).
Step 5: Using a Phillips screwdriver (not supplied), secure parts labelled 7 onto the bed with 30mm M4 screws (D).
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com