Wi-Tek WI-PMS310GF-UPS+ Gigabit L2 Managed PoE Switch Installation Guide

Wi-Tek WI-PMS310GF-UPS+ Gigabit L2 Managed PoE Switch Installation Guide

1.Package Contents

2.Hardware Introduction

2.1 Front Panel

LED Indicators Status        Description

PW: Power system

| On| Power on
Off| Power off

PoE Port

| ****

Amber (24V)

| On| 24V passive PoE output
Off| No 24V passive PoE output

Green (48V)

| On| 48V passive PoE output
Off| No 48V passive PoE output

Link/Act

| On| Link established
Off| No link

SFP Slot Indicator: 9, 10

| On| Link established
Off| No link

2.2 Back Panel

Function Indicator                                Status Description

SUN: Solar panel

| Solid on| Solar power on
Off| No solar power

Blink

| 1/2S: Battery is connected 1/4S: Battery is abnormal

AC

| Solid on| AC input
Off| No AC input or no solar power
Blink| AC input is error, stop charging

VOT: PoE voltage

| Solid on| PoE out voltage is normal
Off| PoE out voltage is abnormal

BOK: Battery indicator

| Solid on| Battery is charging
Off| No battery power
Blink| Battery is connected, but battery is abnormal

BOT: Battery discharge

| Solid on| Battery is discharging and battery capacity is ＞15%
Off| End of battery discharge or no discharge
Blink| 1/2S: Battery capacity is ≤15%
25%, 50%, 75%, 100%| Solid on| Reference the battery discharge capacity

BIN: Battery charging

| Solid on| Battery is charging and battery capacity is <98%
Off| Battery is charged fully or no charging
Blink| The battery is charging, and battery capacity is ≥98%
25%, 50%, 75%, 100%| Solid on| Reference  charge  capacity

3. Hardware Installation

Step 1: How to get 12V or 24V voltage battery?

Lead acid lithium iron(lifepo4)

| 12V or 24V| 20A

Step 2: How to select a suitable solar panel?

Solar Panel Type

12V Solar Panel

| Maximum  power  voltage(Vmp)| 18V| ****
Open circuit voltage(Voc)| <32V

24V Solar Panel

| Maximum  power  voltage(Vmp)| 30V
Open circuit voltage(Voc)| <57V
S+ S- Input Voltage| 12-57V

Step 3: Calculate solar panel and battery capacity
Example: Load=15W (1 pc UPS PoE switch, 2 pcs IP camera, 1 pc wireless CPE)
Sun: 8h/day. Solar Panel: 100W. Battery: 12V/40Ah = 480Wh (100%)
DAY TIME:
Battery capacity at sunrise: 0%
Charge: 100W x 8h x 70% efficiency = 560Wh
Consumption: 15W x 8h = 120Wh
Battery capacity at sunset: 560-120 = 440Wh = 93%
NIGHT TIME
Battery capacity at sunset: 440Wh (93%)
Consumption: 15W x 16h = 240Wh
Battery capacity at sunrise: 440-240Wh = 42% = OK
So you can use 12V/100W solar panel with 12V/40Ah battery.
Note: UPS max. solar power
WI-PS310GF-UPS+ = 20A x 24V = 480W

Step 4: Power on device after completing all setting

Power Priority: Solar Panel, DC IN, Battery

BT+: Battery positive electrodes
BT- : Battery negative electrodes
SUN-: Solar negative electrodes
SUN+: Solar positive electrodes
Note: Positive to positive, negative to negative.

Step 5: Connect 802.3af/at 48V and 24V Passive PoE Powered Devices to port 1-port 8 on the WI-PMS310GF-UPS+. Check the port 1-port 8 LINK/ACT and PoE LED indicator

24V 24W or 48V 30W

| Passive PoE 24V: Compatible with wireless CPE 802.3af/at PoE 48V: Compatible with IP camera, wireless AP| 4/5+, 7/8-

1/2+,3/6-, 4/5+, 7/8-

4. Web Management

The following shows how to start up the Web Management of the WI-PMS310GF- UPS+. Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the WI-PMS310GF-UPS+ is VLAN1 is 192.168.0.1. Then the manager PC should be set to 192.168.0.x (where x is a number between 1 and254, except 1)
, and the default subnet mask is 255.255.255.0.

Logging in to the WI-PMS310GF-UPS+

Step 1: Use Web browser to enter IP address http://192.168.0.1 (default IP address)
Step 2: When the following dialog box appears, please enter the default user name “admin” and password “admin” (or the password you have changed before).

Step 3: After entering the password the main screen appears. The above page shows the information of solar power usage, PoE usage and battery capacity

Step 4: The battery type and battery capacity will be auto display. The default of Wide Capacity CHG — Off.
E.g. If you want to connect a 24V 200W solar panel, and 24V 100AH lead-acid battery. Battery configuration — Auto, the battery type is automatically displayed 24V lead-acid battery.
If it is incorrect, please choose the battery type manually in the drop down box.
Battery Capacity: It is automatically displayed, if the data is incorrect you can enter the right data manually (Formula: Wh= V*Ah).
Charging Current: The max charge current of WI-PMS310GF-UPS+ is 20A.
Wide voltage CHG: The default is Off for 12V solar panel connection. You connect 24V solar panel, please adjust Wide voltage CHG — ON.
For more configuration info, please visit: http://wireless-tek.com/

Warranty Card

Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase  Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer  Signature|

• If the product defects within three months after purchase, we will provide you a new product of the same model.
• If the product defects within the three-year warranty period, we will provide the professional maintenance service.
• Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
• Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker damaged, warranty card losing will disqualify the product from limited warranty.

Technical  Support Cloud Management Company  Website

www.wireless-tek.com

So you can use 12V/100W solar panel with 12V/40Ah battery. Note: UPS max. solar power
WI-PS310GF-UPS+ = 20A x 24V = 480W Wireless-Tek Technology Limited
Address: Biaofang Technology Building 402, Bao’an street, Baoan District,Shenzhen City, Guangdong, China Website:www.wireless- tek.com

Tel:86-0755-32811290

Email:[email protected]

Read More About This Manual & Download PDF:

References

• Test and Measurement Equipment | Tektronix
• Wireless-Tek Technology Limited.
• Wireless-Tek Technology Limited.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>