Wi-Tek WI-AP218AX-Lite Wi-Fi 6 Indoor Wireless Ceiling Mount Access Point Owner’s Manual

Wi-Fi 6 Indoor Wireless Ceiling Mount Access Point
WI-AP218AX-Lite

Overview

WI-AP218AX-Lite is a high-performance Wi-Fi 6 AP for indoor large-area Wi-Fi coverage scenarios. The device supports 802.3af PoE and a 12V DC local power supply. The dual LAN ports design facilitates the expansion of network devices to meet the needs of more networking scenarios. Compliant with 802.11a/b/g/n/ac/ax Wi-Fi protocol, WI-AP218AX-Lite supports MU-MIMO dual- stream technology and offers built-in omnidirectional antennas. It can operate concurrently at 2.4GHz and 5GHz, providing high-speed wireless access of 574Mbps at 2.4GHz, 1201Mbps at 5GHz, and up to 1775Mbps per AP. It has long- range coverage, making it ideal for many wireless scenarios,, especially in offices, shopping malls, hotels, service scenarios, etc.

Features

Ultra-Fast Wi-Fi 6 Speeds
WI-AP218AX-Lite up to 1775Mbps high-speed wireless access.
High-Efficiency Wi-Fi 6
By introducing new technologies such as OFDMA, upstream-MU-MIMO, BSS Coloring, and TWT, the system has greatly improved its performance. Compared with Wi-Fi 5, it has four times more bandwidth and concurrent users, with lower latency and more energy saving.
Cloud Management
Users can conduct the comprehensive remote operation, management, and maintenance of the entirenet work equipment through the Wi-Tek cloud platform, and can also share the network with other for network hosting and collaborative management, to operate and maintain the enterprise network more efficiently.

Multiple Power Supply Methods
Supports 802.3af PoE and 12V DC local power. you can use Ethernet cables to transfer both electrical power and network data, making deployment more flexible and removing the need to install additional power cabling.
Fast Roaming
802.11kvr fast roaming provides fast switching to the access point with the optimal signal when moving between APs.
Support Fit AP and Fat AP Mode
The device supports both Fit AP and Fat AP mode. A wireless network can be formed with multiple APs, or it can be used as a wireless router when deployed independently. The device offers more flexible configurations, more abundant application features, and more extensive applicable scenarios.

Specifications

Hardware   Specifications
Wireless  Standards| IEEE   802.11ax/ac wave2/wave1/n/b/g/a
Operating  Bands| 2.4GHz & 5GHz
Antenna| 2.4Ghz:4.6dBi,  5GHz:  4dBi
Spatial  Streams| 2.4GHz：2×2 MIMO
5GHz：2×2 MIMO
Signal Rate| Up to 574Mbps at 2.4GHz Up to 1201Mbps at 5GHz
Receiver   Sensitivity| 2.4GHz
802.11b:    -85dBm@11M    -92dBm@1M
802.11g:    -72dBm@54M    -90dBm@6M
802.11n  HT20:  -70dBm@MCS7    -88dBm@MCS0
802.11n  HT40:  -68dBm@MCS7    -86dBm@MCS0
802.11ax  HT20:-60dBm@MCS11     -85dBm@MCS0
802.11ax  HT40:  -56dBm@MCS11  -85dBm@MCS0
5GHz:
802.11a:  -72dBm@54M    -92dBm@6M
802.11n  HT20:  -70dBm@MCS7    -90dBm@MCS0
802.11n  HT40:  -68dBm@MCS7    -88dBm@MCS0
802.11ac  HT20:  -70dBm@MCS7    -90dBm@MCS0
802.11ac  HT40:  -68dBm@MCS7    -88dBm@MCS0
802.11ac  HT80:  -58dBm@MCS9    -85dBm@MCS0
802.11ax  HT20:  -62dBm@MCS11    -88dBm@MCS0
802.11ax  HT40:  -58dBm@MCS11    -86dBm@MCS0
802.11ax  HT80:  -55dBm@MCS11    -84dBm@MCS0
Maximum Transmit  Power| <22dBm
Interface| (2)10/100/1000M  Base-T  Ethernet  ports
Power Supply| DC 12V/1.5A (Not Included) 802.3af PoE Supported
Power Consumption| < 15W
Installation| Wall/Ceiling   Mounting
External Buttons| reset button (long press for 8 seconds to restore the factory default configuration)
Dimensions| 188mm 188mm 50mm
Environment| Operating Temperature:-20°C ~ 45°C Storage
Temperature:-40°C ~ 70°C;
Operating  Humidity:  5%  ~  95%  (non-condensing)
Storage  Humidity:  5%  ~  95%  (non-condensing)
Software Features
Operating  Mode| Fit AP, Fat AP
Wireless  Function| Up to 16 SSIDs
Support  SSID  hiding,  Enable/Disable  Wireless  Radio
Manual and  automatic channel assignment
Manual and automatic bandwidth assignment
TxPower control
Roaming| Support Layer 2 roaming
Wireless  Security| Captive portal authentication
Static blacklist and whitelist
Wireless isolation between clients
SSID to VLAN mapping
Support  802.1X
WPA/WPA2/PSK/WPA/WPA2-Enterprise/WPA3
Internet  Connection  Type| Support static IP, DHCP, PPPoE Dial-Up
Management| Support local management  with  web
Support centralized management with AC
Support remote management with the Wi-Tek cloud platform
Platform Management Features| Automatic RF adjustment via the platform
Unified configuration  via  the  platform
Unified monitoring via the platform

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>