TRAPS PTR1029 Kill Trap Tunnel Instruction Manual
- May 15, 2024
- TRAPS
Table of Contents
TRAPS PTR1029 Kill Trap Tunnel
Product Information
Specifications:
- Product Name: Kill Trap Tunnel
- SKU: PTR1029
- Website: TTRRAAPPSS.C.COO.N.ZNZ
Product Usage Instructions
Initial Setup:
Insert the lines with the lined side facing inward, which may require some
effort initially.
Entranceway Internal Baffle:
-
Folding Process:
Fold the slots and ensure the tabs at the bottom remain unfolded for pinning the station to the ground. -
Securing the Tunnel:
Secure the tunnel by aligning with the designated pin holes. -
Tips for Trap Placement:
Place the trap in strategic locations for effective results. -
Additional Resources:
For more information on setting up the Core Flute Tunnel, refer to the instructional video on YouTube.
FAQ
-
Q: How often should I check the trap?
A: It is recommended to check the trap regularly, ideally daily, to ensure timely removal of captured pests. -
Q: Can this trap be used outdoors?
A: Yes, this trap is suitable for outdoor use. Ensure it is placed in a secure location away from children and pets.
Assembly Instructions
SKU : PTR1029
Initial Setup:
- Identify all perforated holes and pop them out.
- Note the fold lines pressed into one side of the core flute; fold the tunnel along these lines, with the lined side facing inwards; this might require some effort initially
Folding Process:
- Once folded, the internal baffle folds over and fits into the designated slot above it, as does the entrance point.
- Fold the side over, ensuring two tabs pass through corresponding holes.
- Finally, fold the base over, securing it with the three tabs that bend over and fit through slots. The tabs at the bottom remain unfolded for pinning the station to the ground.
Securing the Tunnel:
- Use pins through designated holes to fix the tunnel to the ground, ensuring stability and preventing interference from non-target animals
Tips for Trap Placement:
- With the rear of the tunnel open, place the pre-set trap inside the tunnel with the bait towards the rear of the tunnel.
- Fold the flap up, push it forward, and click it into place.
- The trap tunnel is now ready.
Additional Resources:
- Core Flute Tunnel – YouTube
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>