mobiflow Wallbox V2 Charging Device User Guide
- July 20, 2024
- mobiflow
Table of Contents
mobiflow Wallbox V2 Charging Device
Specifications
- Product Name: Manual Wallbox
- Connectivity: SIM, UTP, WiFi
- Compatibility: OCPP
Product Usage Instructions
- Connecting via myWallbox App:
- Download the mailbox app on your smartphone.
- Register or log in to your account.
- Add your charger by scanning the QR code on the frame.
- Check for the latest updates for the charger in the MyWallbox app.
- Select your charger and click on configuration.
- Click on OCPP (if supported).
- The charger will reboot to apply the new configuration.
- Go to the QA platform and confirm the device.
- Connecting via myWallbox Portal:
- Go to the mailbox portal.
- Log in or register if you do not have an account yet.
- Select the required charger and ensure it’s connected to a network.
- The charger will reboot to apply the new configuration.
- Go to the QA platform and confirm the device.
FAQs
- Q: What are the different ways to connect the Wallbox charging device?
- A: You can connect via the myWallbox app on your smartphone or the myWallbox portal on your computer.
- Q: What should I do if I don’t have a Wallbox SIM card?
- A: Contact your Wallbox supplier to obtain a compatible Wallbox SIM card for proper connection.
- Q: How can I confirm the device on the QA platform?
- A: If you do not have a QA login, visit the Mobiflow website to request access, and refer to the QA manual for instructions on confirming the device.
Introduction
This document describes how you need to connect your Wallbox charging device via OCPP to the Mobiflow backend.
There are 2 ways to do this:
- Via the My Wallbox app on your smartphone
- Via my Wallbox portal on your computer
Connection to the internet and thus Mobiflow can be established via SIM, UTP, or WiFi.
IMPORTANT: When connecting the device via SIM, it is imperative that you use ONLY a Wallbox SIM card, as Optimize SIM cards are strictly prohibited and will not be accepted! If you don’t have a Wallbox SIM card, please contact your Wallbox supplier.
PRODUCT USING STEPS
A step-by-step guide to connecting your Wallbox charging device to Mobiflow with the mailbox app
- Download the My Wallbox app on your smartphone.
- Register or log in.
- Add your charger by scanning the QR code on the frame.
- Check for the latest updates for the charger in the MyWallbox app.
- Select your charger and click on configuration .
- Click on OCPP (if the charger doesn’t support OCPP, this button will be invisible).
- Fill out the OCPP parameters and click SAVE*
- Enable: toggle switch
- URL: wss://proxy.optimile.eu/services/ocppj
- Chargepoint Identity (serial number of the charger, please do not change this)
- Accept general terms and conditions
- The charger will reboot and the new configuration will be applied.
- Then go to the QA platform and confirm the device*.
-
- If you do not have a QA login please check the website to get your login: Toegang tot het QA platform aanvragen | Mobiflow and the QA manual to find out how to confirm the device.
A step-by-step guide to connecting your Wallbox to Mobiflow with the myWallbox portal
- Go to the mailbox portal: myWallbox portal.
- Login or register if you do not have an account yet.
- Select the required charger and make sure it has been connected to a network.
- Open the OCPP tab (if your charger is incompatible, this tab will not be shown).
- Fill out the OCPP parameters and click SAVE*
- Enable: toggle switch
- URL: wss://proxy.optimile.eu/services/ocppj.
- Chargepoint Identity (serial number of the charger, please do not change this)
- Accept general terms and conditions
- The charger will reboot and the new configuration will be applied.
- Then go to the QA platform and confirm the device.
- If you do not have a QA login please check the website to get your login: Toegang tot het QA platform aanvragen | Mobiflow and the QA manual to find out how to confirm the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>