Wi-Tek WI-LTE113-O 4G LTE Outdoor GPE Installation Guide

: June 3, 2024
: Wi-Tek

Table of Contents

Wi-Tek WI-LTE113-O 4G LTE Outdoor GPE
**Package content
**Hardware Overview
Mounting
Web conﬁguration
Cloud Management Setting
Warranty Card
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wi-Tek WI-LTE113-O 4G LTE Outdoor GPE

**Package content

Wi-Tek WI-LTE113-O-4G-LTE-FIG-2 **

**Hardware Overview

Wi-Tek WI-LTE113-O-4G-LTE-
FIG-23 **

Mounting

Combine the two parts of the dish reflector.
Hold the reflector assembly by heand (do not usea tabletop or flat surface) and insert the Feed Re-ceiver into the reflector, secure it wiith two screw.
WARNING
Do not install the Feed Receiver into the reflector assembly by pushing down onto a tabletop orother flat surface as this can deform the panels. Hold the reflector assembly by hand.
Insert the Micro SlM card and close thesilicone cover. And then insert the Radio Feed into the Feed Receiver.
Attach the Ball Joint Mount to the Feed Re-ceiver by turning the lock nut clockwise by hand.Do not tighten the nut.
Pull out the port cover and connect an Ethernetcable to the port, then push back the cover.
Open the Metal Strap and feed it through thetwo slots ofthe Ball Joint Mount, then wrap theMetal Strap around the pole.
Loosen the lock nut on the Ball Joint Mount,and aim at the other end of the wireless link.After that lock the nut.
Power up the device，plug and play.

Web conﬁguration

Launch your web browser then enter http://192.16A8.1.1 in the address bar and specify the default login key:admin.

Conﬁguration complete.

Cloud Management Setting

Cloud management settings

Step 1 Launch your web browser then enter http://[cloud2.wireless-tek.com](http://cloud2.wireless-tek.com) in the address bar.
Step 2 Register an account password by user name or email.
Step 3 log in to the cloud account with the account password after registration.

After the login is successful, the steps to bind the device on the cloud account are as follows:

Click ADD NETWORK
Fill in the group name and location, click save.
And click next.
Enter serial number, click ADD to create and click FINISH,the conﬁguration is complete.
Note:
The 17-digit SN code of the 4G Router is shown on the sticker on the back of the device.
In the relevant device options, you can see the bound device information.
¼‰Click Tunnel, select 4G Router, click EWEB to log in to the device

Warranty Card

Username
Address
Telephone No.
Purchase Shop
Purchase Address
Product Model No.
Purchase Time
Serial No.
Dealer Signature

If the product defects within three months after purchase, we will provide you a new product of the same model.
If the product defects within the three-year warranty period, we will provide the professional maintenance service.
Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker damaged, warranty card losing will disqualify the product from limited warranty.

Wireless-Tek Technology Limited

Address: Room 402 4F, BiaoFan Technology Building, Bao’An Avenue, FuYong Town, Bao’An district, ShenZhen
Website:www.wireless-tek.com
Tel:86-0755-32811290
Email:sales@wireless-tek.com
Technical Support: tech@wireless-tek.com
www.wireless-tek.com