Wi-Tek WI-R3 1200Mbps Dual-Band Wireless Mesh Router with PoE Passthrough Installation Guide
- June 3, 2024
- Wi-Tek
Table of Contents
WI-R3
1200Mbps Dual-Band Wireless Mesh Router with PoE Passthrough
Quick Install Guide
www.wireless-tek.com
Package contents
Interface and LED Indicator
| LED | Description |
|---|---|
| PWR | On: the device is powered up. |
Off: the device is powered off.
SYS| On: the device is running normally.
Off: the device is running abnormal.
2.4G| On:2.4G Wi-Fi is normally.
Off:2.4G Wi-Fi is abnormal.
5G| On:5G Wi-Fi is normally.
Off:5G Wi-Fi is abnormal.
2.4G LINK| On:2.4G has link connection.
Off:2.4G has no link connection.
5G LINK| On:5G has link connection.
Off:5G has no link connection.
LAN1/LAN2/LAN3| Flicker: LAN1/LAN2/LAN3 interfaces have forwarding data
access.
Off: LAN1/LAN2/LAN3 interfaces do not forward data access.
WAN| Flicker: WAN interfaces have forwarding data access.
Off: WAN interfaces do not forward data access.
MESH| On: Mesh networking is successful.
Off: There is no device in Mesh networking.
Network Application
PoE Power
Power and data transfer functions are performed over a single cable,
eliminating the need to deploy power outlets for devices such as cameras.
Wireless mesh networking
Provide whole-home Wi-Fi coverage and eliminate weak signals once for all.
Login Method
Please connect devices according to the above topology.
Follow the steps for quick Router configuration, using the initial setup
wizard:
Step 1 Connect your PC to the device via Ethernet or Wireless.
Note: Default WiFi name: Wi-Tek-XXXX. Password: 88888888
Step 2 To log in to the router, launch a web browser and enter
http://192.168.10.1 in the address.
The login page will appear. By default, both the username and password are
admin.
Configuration Steps
- On the start page of the setup wizard, click Next.
- When the device is connected to the Internet, you can set three options: PPPoE, DHCP Client, and Static IP, and then click Next.
- For the WiFi page, you can select the country code and configure SSID, encryption, key. Also, choose whether to enable guest WiFi. Click NEXT.
- Click the COMPLETE button to complete the setting.
- The following page will appear after the configuration is complete. Make sure your device is connected to the internet.
Cloud Management Settings
Step 1 Launch your web browser then enter http://cloud2.wireless-
tek.com in the address bar.
Step 2 Register an account password by user name or email.
Step 3 log in to the cloud account with the account password after
registration.
After the login is successful, the steps to bind the device to the cloud account are as follows:
- Click ADD NETWORK
- Fill in the group name and location, and click save.
- And click next.
- Enter the serial number, click ADD to create and click FINISH, the configuration is complete. Note: The 17-digit SN code of the Add device is shown on the sticker on the back of the device.
- In the relevant device options, you can see the bound device information.
- Click Tunnel, Select binding device type, click EWEB to log in to the device.
Warranty Card
Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer Signature|
- If the product defects within three months after purchase, we will provide you a new product of the same model.
- If the product defects within the three-year warranty period, we will provide the professional maintenance service.
- Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
- Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker
damaged, warranty card losing will disqualify the product from limited warranty.
|
---|---
http://cloud2.wireless-tek.com
Wireless-Tek Technology Limited
Address: Biaofang Technology Building 402, Bao’an street,
Baoan District,Shenzhen City, Guangdong, China
Website:www.wireless-tek.com
Tel:86-0755-32811290
Email:[email protected]
Technical Support:[email protected]