levenhuk Verk LQ20 Ermenrich Digital Level User Manual

: June 11, 2024
: levenhuk

Table of Contents

Verk LQ20 Ermenrich Digital Level
Getting started
Settings
Calibration
LCD screen icons
Specifications
Care and maintenance
Battery safety instructions
Levenhuk International Lifetime Warranty
Documents / Resources

Emmerich Virk LQ20
Digital Level

User Manual

Verk LQ20 Ermenrich Digital Level

POWER button
ZERO button
Battery compartment
Magnetic base (in the V-Groove)

Ermenrich Verk LQ20 Digital Level

Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the device only as specified in the user manual.

Getting started

Oen the battery compartment cover and insert 2 AAA batteries. Close the cover.
Press the POWER button to turn the device on. Press and hold the POWER button for 3 seconds to turn the device off. The device will shut
down automatically in 5 minutes of no operation.

Settings

There are two modes available: the absolute measurement (ABS) mode and the relative measurement mode.
ABS mode. It is a default mode. In this mode, the “ABS” symbol will be displayed on the top right corner. Place the instrument on the measured plane. The data displayed on the LCD indicates the angle between the measured plane and the horizontal plane.
Relative measurement mode. Place the instrument on the first plane. Press the ZERO button to set display to zero and enter the relative measurement mode. The “ABS” symbol will not be displayed in this mode. Place the instrument on the second plane. The data displayed on the LCD indicates the angle difference between two planes.

Calibration

Place the device on the flat surface and press the POWER button and the ZERO button at the same time. The “-1-” symbol will appear on the display. Press the POWER button again, the “-1-” symbol will start flashing, wait till “-2-” symbol will appear on the display. Rotate the device 180° and press the POWER button, the “-2-” symbol will start flashing. Wait till the calibration is complete.

Note: the digital level has been pre-calibrated in the factory. The product should only be recalibrated when it has been dropped.

LCD screen icons

ABS	the level is working in the absolute angle mode
-1-	the level is calibrating for one direction
-2-	the level is calibrating for another direction
Erro	vertical axis deviation
the current level is either up or down from the horizontal or vertical plane

Specifications

Resolution	0.01°
Measuring range	0 to 360° (4×90°)
Measurements	°
Accuracy	±0.1° at 0° and 90°; the rest: ±0.2°
Auto-off	5 min.
Operating temperature range	0… +40°C / 32…104°F
Power supply	2 AAA batteries

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Use the device only as specified in the user manual. Keep away from children. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Do not use the product in explosive environment, close to flammable materials. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Make sure the batteries are installed correctly with regard to polarity (+ and –). Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk International Lifetime Warranty

All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met.

For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612,
USA, +1-813-468-3001, contact_us@levenhuk.com
Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102,
Czech Republic, +420 737-004-919, sales-info@levenhuk.cz
Levenhuk®, Ermenrich® are registered trademarks of Levenhuk, Inc.
© 2006–2023 Levenhuk, Inc. All rights reserved.
www.levenhuk.com
20230213

Documents / Resources

| levenhuk Verk LQ20 Ermenrich Digital Level [pdf] User Manual
Verk LQ20 Ermenrich Digital Level, Verk LQ20, Ermenrich Digital Level, Digital Level
---|---