Wi-Tek WI-PS301G-UPS Solar Controller Installation Guide
- June 3, 2024
- Wi-Tek
Table of Contents
Wi-Tek WI-PS301G-UPS Solar Controller
Package Contents
1 × Solar
Controller
|
1× Mounting Accessory Kit
---|---
1× Quick
Installation Guide
Hardware Introduction
Front Panel
Top Side Panel
Bottom Side Panel
Note
VO+: DC output positive electrode
VO-: DC output negative electrode BT+: Battery positive electrode| BT-:
Battery negative electrode
S+: Solar power positive electrode S-: Solar power negative electrode
---|---
Product Specifications
| Products | WI-PS301-UPS |
|---|---|
| Product Terminals | 2 x solar input terminals |
1 x battery input terminal
2 x DC output terminals
1 x temperature sensor terminal
Max Charge Current| 8A
Solar Type| 12-24V 400W input (Open Circuit Voltage 18V~32V)
Battery type
| 12V lead-acid battery
12.6V/14.8V lithium battery
Power Output
| 12V Max 5A（Optional）
24V Max 3A（Optional）
LED Indicators
SUN:
Solar power| Solid on| The solar power on is normal
Off| The solar power is off or failed
BIN:
Battery charge| Solid on| The battery is charging
Off| No battery is charging or battery is failed
BOUT:
Battery discharge| Solid on| The battery is discharging
Off| No battery is discharging or battery is failed
BT:
Battery Status| Solid on| Battery is connected
Blink| Battery is disconnected or failed
25%/50%/75%/100%| Solid on| Display battery current capacity
2A/4A/6A/8A| On| Display battery charging current
DIP Switch
PW:
Power| To the left| Turn on the solar solar controller
To the right| Turn off the solar power
24V| To the left| The VO terminals with 24V max 3A output
To the right| The VO terminals with 12V max 5A output
VI| To the left| Option DC input
To the right| Option solar power input
LB:
Lithum battery| To the left| 14.8V 100Ah lithum battery, max charge current 8A
To the right| 12.6V 100Ah lithum battery, max charge current 8A
BM| To the left| Choose the 12V 100Ah lithum battery input, max charge current
8A
To the right| Choose the 12V 100Ah lead-acid battery, max charge current 8A
Note: Support 12V (18-32v) solar plate, maximum power input 200W
DIP Switch
Step 1: Adjust the DIP switch (e.g. 12.6V lithum battery, 24V DC output)
Before installation, ensure that the device is powered off Option the 12V/24V
DC output via DIP switch manually. Solar energy must be combined with battery
use to start the device
Step 2: Hook up the 12V solar panel to S terminals, positive to positive,
negative to negative
Step 3: Hook up the 1 2.6V lithum battery to B terminals, positive to
positive, negative to negative.
Step 4: Hook up a device (e.g. WI-PMS310GF-Alien-I) which supports 24V DC in, positive to positive, negative to negative.
Step 5: Power on the solar controller via DIP switch.
|
Cloud
Management
|
Company Website
---|---|---
Wireless-Tek Technology Limited
Address: Biaofang Technology Building 402, Bao’an street,
Baoan District,Shenzhen City, Guangdong, China
Website:www.wireless-tek.com
Tel:86-0755-32811290
Email: sales@wireless-tek.com
Technical Support: tech@wireless-tek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>