Wi-Tek WIP-S306GF-UPS Unmanaged Solar PoE Switch Installation Guide

Installation Guide
Unmanaged Solar PoE Switch
WI-PS306GF-UPS/WI-PS306GF-UPS-15A

Package Contents

1×Solar PoE Switch

1×AC Power Cord (Except Australia)

1×AC Power (Except Australia)

Mounting Accessories (Hook2; Screw Driver1; Screw*4)

1×Installation Guide

Hardware Introduction

DIP Switch Status Description

1-PoE Watchdog

| Up| All PoE ports enable PoE  watchdog  function,  which  can  detect  and reboot the offline compliant PoE powered devices automatically.
Down| Turn off PoE watchdog function

2-VLAN

| Up| All downlink ports are isolated from  each  other,  but  can communicate with uplink ports.
Down| Turn off VLAN function

3-EXTEND

| Up| The data and PoE power’s transmission distance of port 1~5 can be up to 250m.
Down| The data and PoE power’s transmission distance of port 1~5 can be up to 100m.

4-Port 4

| Up| Port 4 can be compatible with 24V forced PoE powered devices
Down| Port 4 can auto-detect 24V passive or 802.3af/at PoE powered device

5-Port 5

| Up| Port 5 can be compatible with 24V forced PoE powered devices
Down| Port 4 can auto-detect 24V passive or 802.3af/at PoE powered device
Port LED Indicators                                    Status Description

PoE

|

Amber

| On| Power on
Off| No power

Link

|

Green

| On| Power on
Off| No power

Giga-Gigabit

| Amber| 1000Mbps  link  established
Green| 100Mbps link established
Off| No link
Function Indicators (Front Panel)| Status| Description| Function  Indicators| Status| Description
---|---|---|---|---|---

4B:

Port 4-24V PoE

| On| 24V PoE on|

4B:

Port 5-24V PoE

| On| 24V PoE on
Off| No 24V PoE| Off| No 24V PoE

4A:

Port 4-48V PoE

| On| 48V PoE on|

4A:

Port 5-48V PoE

| On| 48V PoE on
Off| No 48V PoE| Off| No 48V PoE

6:

Port 6-SFP slot

| On| Link established|

PW:

Power

| On| Power on
Off| No link| Off| No power

BOT:

Battery  Discharge

| Solid on| Battery is discharging and battery capacity is ＞15%|

BIN:

Battery Charging

| Solid on| Battery is charging and battery capacity is <98%
Off| End of battery  discharge or no discharge| Off| Battery is charged fully or no charging
Blink| 1/2S:  Battery  capacity is ≤15%| Blink| The battery is charging, and battery capacity is ≥98%

2.2 Back Panel

Solar Power Terminal
S+ : Solar positive electrode V+ : DC positive electrode B+ : Battery positive electrode
S- : Solar negative electrode V- : DC negative electrode B- : Battery negative electrode

DIP Switch

1. Switch power system
2. Battery type option
3. Battery voltage option
4. Lithium battery voltage option

Battery Type Option

Power on device after completing all setting.

Hardware Installation

Step 1: How to get 12V or 24V battery?

In series for 24V battery In parallel for 12V battery

|

Step 2: How to select a suitable solar panel?

Model                                                  Solar Panel Type

WI-PS306GF-UPS

|

12V

Solar Panel

| Maximum power voltage(Vmp)|

26V

|

Open circuit voltage(Voc)|

<32V

24V

Solar Panel

| Maximum power voltage(Vmp)| 36V
Open circuit voltage(Voc)|

<45V

S+ S- Input Voltage

For 12V Battery: DC 15-26V For 24V Battery: DC 30-36V

WI-PS306GF-UPS-15A

|

12V

Solar Panel

| Maximum power voltage(Vmp)|

26V

Open circuit voltage(Voc)|

<30V

24V

Solar Panel

| Maximum power voltage(Vmp)| 30V
Open circuit voltage(Voc)| ≤40V
S+ S- Input Voltage

For 12V Battery: DC 15-32V For 24V Battery: DC 30-57V

Step 3: Calculate solar panel and battery capacity
Example: Load=15W (1 pc UPS PoE switch, 2 pcs IP camera, 1 pc wireless CPE) Sun: 8h/day. Solar Panel: 100W. Battery: 12V/40Ah = 480Wh (100%)
DAY TIME:
Battery capacity at sunrise: 0%
Charge: 100W x 8h x 70% efficiency = 560Wh
Consumption: 15W x 8h = 120Wh
Battery capacity at sunset: 560-120 = 440Wh = 93%
NIGHT TIME
Battery capacity at sunset: 440Wh (93%)
Consumption: 15W x 16h = 240Wh
Battery capacity at sunrise: 440-240Wh = 42% = OK
So you can use 12V/100W solar panel with 12V/40Ah battery.
Note: UPS max. solar power
WI-PS306GF-UPS = 5A x 24V = 120W
WI-PS306GF-UPS-15A = 15A x 24V = 360W
Step 4: Power off the WI-PS306GF-UPS device, connect the solar panel, battery and temperature sensor(not included).
Note: The switch must be grounded.
Note: For model WI-PS306G F-U PS-15A, S+S- and V+V- can’t be connected at the same time to avoid the burning device.

Power Priority: Solar Panel, DC IN, Battery
Step 5: Connect the 24V passive or 802.3af/at PoE Powered Devices.

4,5 +  7,8 –

Warranty Card

Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase  Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer  Signature|

• If the product defects within three months after purchase, we will provide you a new product of the same model.
• If the product defects within the three-year warranty period, we will provide the professional maintenance service.
• Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
• Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker
  damaged, warranty card losing will disqualify the product from limited warranty.

| http://support.wireless-tek.com/
---|---
| http://cloud2.wireless-tek.com
| http://www.wireless-tek.com/

Wireless-Tek Technology Limited
Address: Biaofang Technology Building 402, Bao’an street,
Baoan District,Shenzhen City, Guangdong, China
Website: www.wireless-tek.com
Tel:86-0755-32811290
Email: sales@wireless-tek.com
Technical Support: tech@wireless-tek.com

References

• Test and Measurement Equipment | Tektronix
• Wireless-Tek Technology Limited.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>