Carisma MSA-1E Adventure Subaru Brat RTR Micro Scale Truck User Manual
- June 6, 2024
- Carisma
Table of Contents
USER MANUAL & SETUP GUIDE
MANUALE D’USO E DI MONTAGGIO Bedienungs – and Bauanleitung
NOW w V2 Motor & Servo Saver
Jetzt mit v2 motor & servo saver Maintenant avec moteur v2 et economiseur
de servo Ora con motore v2 e servo saver ,
Welcome to the ever-growing world of Carisma Scale Adventure.
Have you ever wanted to run a Scale Rig but the weather, or your location
stopped you?
Well, Carisma Scale Adventure now brings you two new models that will allow
you to run anywhere a larger rig can’t. The 1/24th MSA-1E Ford F-150 has been
designed from the ground up to not only look the part but also perform way
beyond its stature.
The sofa in the lounge becomes a range of mountains, floor cushions become
giant boulders, your desk the great indoors, the backyard a never-ending
wilderness. The only limits these rigs have is your own imagination (and
possibly how predatory the local cats are!). Test both your driving ability
and your course-building ingenuity. Drive from point A, to point B, via point
Z!
With their highly detailed bodyshells, 2.4GHz radio gear, locked axles, High
torque steering servo and motor, a sturdy shaft-driven driveline, 4-link
suspension, optimized weight bias and high-grip, all-terrain tires. Add to
that our new Karma Drive Technology and bespoke electronics, and exciting
things start to happen. They contain the essence of our full-sized SCA-1E,
just distilled.
Remember, the MSA-1E may be small in stature, but you can personalize it just
like you would its bigger brother the SCA-1E. The limit is your own
imagination.
These tiny trucks are designed for big #CarismaScaleAdventure, enjoy every
millisecond of yours…
Life is short, so truly live it, one #CarismaScaleAdventure at a time!
SAFETY PRECAUTIONS
Thank you for your purchase of the Carisma MSA-1E Rig. With proper use and regular, basic maintenance, this rig will provide you and all those who drive it hours of reliable RC funl Please read this manual to fully understand its features, capabilities, and the best operation of the product. Should you have a technical question or need replacement parts, please contact your local Carisma RC dealer, the original place of purchase or our dedicated web Shop:
http://www.carisma-shop.comYou may also contact us directly via e-mail
at:webmaster@carisma-shop.com
WARNING
Read the ENTIRE instruction manual to become familiar with the features of
this product before operating. This is a sophisticated hobby-grade product. It
must be operated with caution and common sense. It will require some basic
mechanical ability. Failure to operate this product in a safe and responsible
manner could result in injury or damage to the product, persons, or other
property. This product is not intended for use by children without direct
adult supervision. Do not use with incompatible components or alter this
product in any way outside of the instructions provided by Carisma RC. This
manual contains instructions for safe operation and maintenance. It is
essential to read and follow all the instructions and warnings in the manual,
prior to assembly, setup, or use. If you are not prepared to accept these
condition, please return this product immediately to the place of purchase.
CAUTION : This product is intended for ages 14+ Users under 18 years of
age require parental supervision. Do not expose any battery or component to
open flame or another source of high temperature. You must read the enclosed
instruction manual completely prior to using this product. Do not use any
charger except the one included charging the battery. Never leave a battery
unattended during charging. Do not expose any components to moisture. Always
avoid water exposure to all equipment that’s not specifically designed and
protected for this purpose. As the end-user of this product, you are solely
responsible for operating in a manner that does not endanger yourself and
others or result in damage to the product or property of others.
Always carefully follow the directions and warnings for this, and any optional
equipment (chargers, etc.). This model is controlled by a radio signal subject
to interference from many sources outside your control. Never place any
portion of the vehicle in your mouth as it could cause serious injury or even
death. Always operate your vehicle in an open space away from full-size
vehicles, traffic, people, and animals. Always keep a safe distance in all
directions around your model to avoid collisions or injury. Always keep all
chemicals, small parts, and anything electrical out of the reach of children.
Always keep the transmitter powered on while your vehicle is powered on.
Always remove batteries after use or before disassembly.
Never operate your vehicle with low transmitter batteries.
Always keep your vehicle in sight and under control.
Never operate your vehicle with damaged wiring.
Always let parts cool after use before touching.
Always keep moving parts clean and dry.
Always use fully charged batteries.
CTX-2000 2.4GHz FHSS
Technology System
The following is an overview of the various functions and adjustments found on
the CTX-2000 radio system. It is important to read and understand all of these
functions and adjustments before driving.
FUNCTIONSTRANSMITTER CTX-2000 Steering Wheel: Control direction (Left/Right)
of the RC model. Throttle Trigger: Control speed and direction
(Forward/Brake/Backward) of the driving model. ON / OFF Switch: Power ON / OFF
the transmitter. SW1 Button: Is used to synchronize the connection between the
transmitter and the receiver. It also serves as an additional function on
different models. LED Indicator: For indicating battery low, pairing in
progress, and normal operation. ATV: Adjust the maximum steering angle on both
sides when the model turns Left / Right. ST. Trim Dial: Adjust the neutral
position of the steering servo when model wheels are straight ahead. TH. Trim
Dial: To adjust the throttle position Steering Reverse: Reverse the response
direction when operating the Steering Wheel. Throttle Reverse: Reverse the
response direction when operating Throttle Trigger. Throttle Limit Switch: Set
the max Forward Speed of the model. • In general, users will experience
understeer when making a wide turn at high speed or oversteer when making
sharp turns at high speed (easy to spin out). Users should practice the
Throttle and steering approach for different cornering at a different speed or
road surface.
Battery Installation
- Supplied with 4 x 1.5V AA Batteries, the radio can be operated a few hours. Installation: Remove the battery compartment cover as shown below.
- Install the batteries observing the polarity marked on the battery compartment. cam,,,_
- Then reinstall the battery compartment cover as in the Picture shown below.
Warning : Never disassemble batteries or put the batteries in fire,
chemical agents, otherwise they may cause personal injuries or property
damages.
Battery Disposal: Observe corresponding ding regulations about wasted
battery treatment regulations. 1. After running out of power, dispose of
wasted batteries in designated areas far away from the water supply, household
areas, and planted areas. 2. Submit the wasted batteries to specific recycling
stations.
Battery LED Indicator
The LED solid on indicating that the batteries have sufficient power. When batteries voltage drops below 4 volts, LED will Flash, indicating batteries power is low and should be replaced.
ATV
AN enables to adjust the maximum steering angle of the servo on both sides (Left and Right) when the model makes steering. The AN affects the sensitivity of servo. Reducing dual-rate value can lower the sensitivity of servo and reduce the same maximum steering angle on both sides. Remember to adjust the AN within the adjustment range.
Pre-Run Check
- Steering: Adjust the steering trim to keep the front wheels in a straight line when the steering wheel remains in a NEUTRAL position.
- Throttle: Adjust the throttle trim to make the motor stop while the throttle trigger at a NEUTRAL position.
Always turn on the transmitter first. If the LED is not solid on, you need to check whether the batteries are good or incorrectly installed.
Reversing
Steering Reverse: Reverse the response direction when operating the steering wheel. Turning left steering wheel, the model turns right while turning right the model turns left. Throttle Reverse: Reverse the response direction when operating the throttle trigger. Pushing forward throttle trigger the model moves backward while pulling back, the model moves forward. If necessary you can just use a small screwdriver to adjust the responding switches.
Throttle Limit Switch
The slide switch to select the max forward speed:
- Slowest
- Intermediate
- Fastest
MSA-1E Electrics
MBC-241ST USB Charger
This charger is designed to charge the included 7.2V NiMH packs only. DO NOT
charge any other type of battery. It is NOT intended for LiPo or Li-ion packs,
or packs of a lower or higher voltage rating. When connected to a standard USB
power source (500 mA or above is recommended), a red LED will light up
indicating that the power is ON. During charging the maximum charging current
is approx 100mA, and when the pack is fully charged,the charging current will
drop. A typical time to fully charge a completed drained battery is 2 hours.
After charging, disconnect the USB charger, and the pack. It is normal for the
pack itself to feel slightly warm after charging.
NOTE: A partly discharged pack will take shorter time to be fully charged.
BUT, due to the physiology of the NiMH packs, and their tenancy for memory
effect, it is always best to fully discharge and cycle NiMH packs. It may take
a few cycles for your pack to reach its full potential.
REMEMBER : younger RC fans must always charge the pack under adult
supervision, and never leave the charging pack unattended. The red LED will
NOT turn off, it only indicates that USB power is present. It is advised that
you set a timer to independently notify you when the 2 hour charge cycle is
complete. Failure to adhere to the correct charging procedure can lead to
permanent damage to the pack, and in extreme cases, fire or personal injury.
Charge smart, charge safe, follow guidelines.
ARC-2000: RX/ESC Module Instructions BINDING PROCESS
- Power off the TX
- Press and hold the Bind key of the ARC-2000 combined RX/ESC on the vehicle itself, and then turn it on. the ARC’s LED will start to flash slowly.
- Next, hold the Bind button of the CTX-2000 transmitter and then power it on. Again an LED will flash on the CTX when the binding process is initiated.
- When the ARC shows a solidly lit LED, this indicates both TX and RX units have successfully paired and bound.
- In the event the ARC LED stops flashing, this indicates the RX is not found by the TX. Move the position of the TX closer, and then start the procedure at step 1.
LED INDICATOR STATUS
-
When a TX signal is received, the ARC LED will be either solidly on (indicating a NiMH pack) or will be Flashing (indicating a LiPo pack). NOTE: to set battery type, see section 4: ‘Setting Battery Type’.
-
When the TX signal is lost for over 5 seconds, the ARC LED will flash twice repeatedly, and the steering servo will move once. This is a visual cue to remind you to power off the vehicle.
-
If you drive the vehicle at full throttle for long periods of time, the motor may become too hot. This will eventually damage the motor. The ARC will sense this and automatically stop the motor (Thermal Shutdown) for a while, allowing it to cool. The ARC LED will flash 6 times very quickly, and repeat this until the motor has cooled sufficiently.
NOTE : If this happens again within a short space of time, the Thermal Shutdown time will be longer. -
Setting Battery Type: During normal operation with TX, RX power on and throttle at stop position. Hold the Bind Key of ARC-2000 for over S seconds, the battery type will be changed to the next battery type. And the LED will immediately reflect the battery type that has been selected. LED: Solid = NIMH Flashing = LIPo
CE Compliance Information For The European Union
Carisma hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of the RED Directive 2014/53/EU, EN
301 489-1 V2.1.1, EN 301 489-17 V3.1.1, MI EN 300 328 V2.1.1
The associated regulatory agencies of the following countries recognize the
noted certifications for this product as authorized for sale and use.
Products: CTX-2000, ARC-2000 Equipment Class: 2 FCC Information FCC ID
YDTCTX-2000 Item Name : CTX-2000 2.4GHz Transmitter
The objects of the declaration described above are in conformity with the
requirements of the specifications listed below. Manufactured By: Mun Ah
Plastic Electronic Toys Company.,Ltd Statement – This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. RF Exposure Warning: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. And
should be operated with a minimum distance of 20 cm between the antenna & your
body.
Instructions for Disposal of WEEE by Users in the European Union
This product must not be disposed of with other waste. Instead, it is the
user’s responsibility to dispose of their waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or where you purchased the product.
NCC Warning Statement
Article 12 Without permission, any company, firm or user shall not alter the
frequency, increase the power, or change the character and functions of the
original design of the certified lower power frequency electric machinery.
Article 14 The application of lower power frequency electric machineries shall
not affect the navigation safety nor interfere a legal communication, if an
interference is found, the service will be suspended until improvement is made
and the interference no longer exists.
FCC Information
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide residential protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on and
off, the user is encouraged to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and the receiver. Connect the equipment into
an outlet on a circuit different from that to which the receiver is connected.
FCC Warning:
The equipment may generate or use radiofrequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. Modifications
not authorized by the manufacturer may void the user’s authority to operate
this device. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has been
evaluated to meet general RF exposure requirements. The device can be used in
portable exposure conditions without restriction.
Limited Warranty
Warranty Period: Carisma R/C warrants that the CTX-2000 (“Product”) will be
free from original factory defects in materials and workmanship upon purchase
(“Warranty Period”). What is Not Covered – This warranty is not transferable
and does not cover (a) cosmetic damage, (b) damage due to acts of God,
accident, misuse, abuse, negligence, commercial use, or due to improper use,
installation, operation or maintenance, (c) modification to any part of the
Product, (d) attempted service by anyone other than a Carisma R/C authorized
service center, or (e) Product not purchased from an authorized Carisma RC
dealer. OTHER THAN THE EXPRESS WARRANTY ABOVE, Carisma RC MAKES NO OTHER
WARRANTY OR REPRESENTATION AND THEREFORE DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY AND SUITABILITY FOR A PARTICULAR PURPOSE. THE
PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL
MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Purchaser’s Remedy – Carisma RC’s sole obligation and purchaser’s sole and
exclusive remedy shall be that Carisma RC will, at its option, either (a)
service, or (b) replace, any Product determined by Carisma RC to be defective.
Carisma RC reserves the right to inspect any and all Product(s) involved in a
warranty claim. Service or replacement decisions are at the sole discretion of
Carisma RC. Proof of purchase is required for all warranty claims. SERVICE OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND
EXCLUSIVE REMEDY. Limitation of Liability CARISMA RC SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER
THEORY OF LIABILITY, EVEN IF CARISMA RC HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Further, in no event shall the liability of Carisma RC exceed the individual
price of the Product on which liability Is asserted. As Carisma RC has no
control over use, setup, final assembly, modification or misuse, no liability
shall be assumed nor accepted for any resulting damage or injury. By the act
of use, setup or assembly, the user accepts all resulting liability. If you se
the purchaser or user are not prepared to accept the liability associated with
the use of the Product, the purchaser is advised to return the Product
immediately in new and unused condition to the place of purchase. This
warranty gives you specific legal rights, and you may also have other rights
which vary from country to country or state to state. Carisma RC reserves the
right to change or modify this warranty at any time without notice.
MUN AH PLASTIC ELECTRONIC TOYS CO, LTD.
Flat G, 21 Floor, Kingsway Industrial Building,
Phase 2, 173 – 175 Wo YI Hop
Kwai Chung, N.T., Hong Kong.
Note : For official Carisma RC spare parts, see your local road, hobby
shop or place of purchase first. If unavailable, parts can be ordered direct:
http://www.carisma-shop.com
MSA-1E Setup Notes
Shocks – Spring Rate & Preload:
FPV Add On Channel Used:
Battery Type & MAh Rating:
Motor Wind & Gearing:
Other Setup Options Used:
“Owning an MSA-1E is just the start, where it takes you Is the real
adventure…” Ivan Carisma
Visit us onwww.carisma-shop.com
|
---|---
https://www.carisma-shop.com| https://carismascaleadventure.com/support/
62020Carisma. All Rights Reserved. Product specifications are subject to
change. Some models shown are prototypes which may vary slightly from what is
inside.
Einige dargestelite Produkte sind Prototypen and Ictinnen leicht van dam
!Malt unterecheiden. Copyright 2020 Cesme.
Documents / Resources
|
Carisma MSA-1E Adventure Subaru Brat RTR Micro Scale
Truck
[pdf] User Manual
MSA-1E, Adventure Subaru Brat RTR Micro Scale Truck, MSA-1E Adventure Subaru
Brat RTR Micro Scale Truck, F150-CC24
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>