2006 Hyundai Truck Tucson V6-2.7L Instruction Manual
- June 4, 2024
- HYUNDAI
Table of Contents
2006 Hyundai Truck Tucson V6-2.7L.
PROCEDURES
PARKING BRAKE SYSTEM
COMPONENTS
REMOVAL
NOTE:
The parking brake cables must not be bent or distorted. This will lead to
stiff operation and premature failure
- Remove the floor console.
- Loosen the adjusting nut (A) and the parking brake cables.
- Disconnect the connector (A) of the parking brake switch.
- Remove the 4 bolts and parking brake lever assembly (A).
- Remove the wheel and tire.
- Remove the brake disc.
- Remove the parking brake cable (A) from the brake shoe.
- Remove the parking brake cable retaining ring (B), from the parking brake cable (A).
INSTALLATION
- Install the removed parts in the reverse order of removal.
- Apply the specified grease to each sliding parts of the ratchet plate or the ratchet pawl. Specified grease: Multi-purpose grease SAE J310, NLGI No.2
- After installing the parking brake cable adjuster, adjust the parking brake lever stroke (Refer to the parking brake check and adjustment). See: Parking Brake System > Testing and Inspection
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>