HYUNDAI HY-T26 True Wireless Earphones User Manual
- May 15, 2024
- HYUNDAI
Table of Contents
HYUNDAI HY-T26 True Wireless Earphones
Usage Instruction
- Don’ t attempt to disassemble the unit and change any part, except there is operation method mentioned in the manual.
- Don’ t expose the unit to liquid, moisture or humidity, since it is not a waterproof product.
- Disconnect the unit with your BT device and move it to the safe area if the liquid get inside the unit.
- Don’ t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
- Don’ t expose the unit to extremely high temperature or dispose of the unit in f ire as it will result in an explosion.
- Don’ t place the unit in an electromagnetic interference environment to avoid malfunction.
Packing list
-
EarphonesX2
-
Manual X1
-
Sling X1
-
Charging case X1
-
type C X1
Product schematic description
Product specification
BT Version: V5.3
Transmission distance:!Om
Battery capacity: 50 mAh
Playing time: About 5 hours
Charging time: About 1.5 hours
Rated input: 5V= 30mA
Charging case specification
Battery capacity: 250mAh
Charging time: About 2 hours
Rated input: 5V= 250mA
Playing time: About 15 hours
(All technical information is subject to actual performance) Charge the
Charging case Connect the Type-C cable to the 5V power adaptor, and another
end to the charging port of the Charging case. (Tips: When the green light of
the charging bin blinks, please charge the charging bin in time.)
LED Indicator Status
Charging case Indicator
- Charge the charging bay: Green light on.
- Charging bay is fully ch a rged: Indicator is off.
- Charging the earphones is n o t fully charged: White light flashing.
- Fully charge the earphones: White light on.
- Low charge: Green flashing
Earphones Indicator
- Power on: Blinking white and green
- Power off: White light flashes 3 times
- BT pairing status: White and green lights flash alternately
- Earphones are succ e ssfully paired: Indicator is off.
Product operating instructions
-
Power on
Method 1: Remove the earphones from the charging bin, and the earphones will automatically power on.
Method 2: When the earphones is off, press and hold the earphones to touch the functional area for 3 seconds power on. -
Power off
Method 1: Put the earphones back into the charging bin and turn off the earphones.
Method 2: Press and hold the earphones to touch the functional area for 5 seconds, and the earphones shuts down. -
Pairing
Step 1: Remove the earphones from the charging compartment, the earphones will automatically charging, and the earphones will be turned on automatic team formation.
Step 2: Open the BT list of smart devices, search for “HY-T26” and connect.(Supports single-ear use).
- Touch control button operating
Music playing mode
- Left/Right earphone operating
Hands free function
- Left/ Right earphone operating ( incoming call)
Active the voice assistant function (the smart devices support voice assistant function)
- Left/ Right earphone operating
Name and content of hazardous substances in products
| Part Name | Harm full materials |
|---|---|
| Pb | Hg |
| Printed circuit assembly | 0 |
Small structural parts such as
shell
| 0| 0| 0| 0| 0| 0
This form is compiled in accordance with SJ/T 11364.
O: Indicates that the content of1hehazardous substance1n all homogeneous
materials of the part is in Below the limit requirements specified in GB/T
26572
x : Indi cates that the content of the hazardous substance111at least one of
the homogeneous material so f the part exceeds The limit requirements
specified in GB/T 26572. The parts marked with “X” on the form are all harmful
due to the limitations of global technological development. Substitution of
substances.
Printed circuit board components·: in dud in panted circuit boards and their
parts, electronic components, etc.,6ependingon the product model. the product
you purchased may not contain all the above components
| Electronic and electrical products sold m the People” s Republic of China
must mark this Logo. the number in the logo represents the product under
normal use Environmental protection use period.
Warranty Service
Dear user, chis warranty card Is the proof of your future warranty application, please cooperate with the seller to fill ,tout and keep it for future use!
Authorized by Hyundai Corporation
Authorized Party: Shenzhen Hyundai Digital Electronics Co., Ltd. Address:
601A,Chent,an Research and Development Building. No. 50,Baotian 1st
Road,X1xiang Street, Bao’an District, Shenzhen City. HYUNDAI Creative
(Shenzhen)Technology Development Co., Ltd. 1915. Block A, RongchuangZh1hui
Building, Intersection of Long Sheng Road and Jing Long Construction Road ,
Shang Fen Community, Minzhi Street, Longhua District, Shenzhen.
F CC Statement
According to Part 15 of the FCC Rules, this device has been tested to meet the restrictions for Class B digital devices. These restraining decrees In providing reasonable protection against harmful disturbances in residential facilities. The device generates and uses radiofrequency energy, lf this instruction is not installed and used in accordance with the regulations, it may cause harmful interference to radio communications. However, there are There is no guarantee that interference will not occur in a particular installation. If this device has built for radio or television reception Into harmful interference, the device can be determined by turning it off and on when the user is encouraged to try to pass through one or Several more measures below.
- Redirect or reposition the receiving antenna.
- Increase the distance between device and receiver.
- Sockets connected to devices on circuits different from the receiver are connected.
- Please consult a dealer or experienced radio/TV technician for assistance.
This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions
- The device shall not cause harmfuI interference.
- The device must accept any received interference, including interference that may cause unexpected operation.
Changes or modifications that are not explicitly approved by the compliance responsible party may invalidate the user’s permission to operate the device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>