HYUNDAI GM2 PRO True Wireless Earphones User Manual

HYUNDAI GM2 PRO True Wireless Earphones User Manual

Packing list

1. Charging case LED area

Type-C charging port

Manualawarranty card

Type-C Charging Cable

Product introduction

1. Except for the operation methods specifically marked in the manual please do not try to disassemble or replace any parts in the earbuds.
2. Don I put the earbuds in the water or any others liquid. The earbuds are not waterproof.
3. If any liquid enters the product by accidentally.please disconnect and remove the connection immediately.
4. Please make sure that there is no water on your hands when Installing of uninstalling the product to avoid electricshock
5. Do not put the product near by the heat source or expose it to the fine source directly.
6. Do not put the product in the environment with strong electromagnetic force, otherwise it will cause product malfunction

Product specifications

BT version: V5.3
Transmission distance: 10m
Battery capacity: 40mAh
Playing time : About 5 hours (Headphone)
Charging time: About 1 hours (Headphone)
Rated input: 5V 35mA

Charging case specifications

Battery capacity: 350mAh
Charging time: About 1.5 hours
Rated input: 5V 300mA
(All technical information is subject to actual performance)

Charge the charging box

Connect the charging box to the 5V power adapter with the Type-C

Charging cable
(Reminder: Open or close the charging box. When the blue light of the charging box flickers, please charge the charging box in time.)

Rated input: 5V 35mA (Headphone) 5V 300mA Charging Case)

LED Indicator Status

keeps on
Charging case low power| indicator flashes
Charging case charging| indicator flashes
Charging case full| indicator light is on

Product operation instructions

1. Power on
   Option 1 Long press the MFB button for 5 seconds.
   Option 2 The earbuds automatically turn on when they are taken out from the charging case.

2. Power off
   Mode 1 There is no connection in the power on state, and it will automatically shut down after 3 minutes Mode 2 Put the earphone back into the charging box and automatically shut down;

3. pairing
   Step 1 Automatically enter bluetooth pairing mode after power on
   Step 2: Open the list of bluetooth devices, search GM2 pro” and connect it. ”
   Step 3: When the left and right earphones do not match, please restore the factory Suttings, put it back to the charging compartment and then turn on the automatic pairing
   

Touch key operation
Conventional mode

Voice assistant : Long press the left earphone 25
Volume: Click right MFB
Volume Click left MFB

Music playback mode

Pause/Play: Double-click on any of the headphone
Last song: Triple click left MFB
Next song: Triple click right MFB.

Phone hands-free

Answer: Double-click the touch area of any headphone
Hang up: Double-click the touch area of any headphone
Rejection: Long press any earphone touch button for 25

Game mode/music mode switching: connected device

Press right MFB for 2 seconds to enter game mode
Press right MFB for 2 seconds to enter music mode
Note :the factory default is music mode

The name and content of h armful substances in the earbuds

This form is compiled in accordance with SJ/T 11364.O:Indicates that the content of the hazardous substance in all homogeneous materials of the part is in below the limit required by GB/T 26572.X:Indicates that the hazardous substance at least in a certain homogeneous material of the part exceeds The limit requirements specified in GB/T 26572.The parts marked with “X” on the form are all harmful due to the limitations of global technological development. Substitution of substances.
Printed circuit board components: Including printed circuit boards and their parts,electronic components, etc.and depending on the product model, the earbuds you purchased may not contain all the above components
| Electronic and electrical products sold in the People’s Republic of China must mark this LOGO, the number in the logo represents the product under normal use Environmental protection use period

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

User info

User name| | Email|
Contact number| | Postal code|
Mailing address|
Product information
Product name| | Product number|
Product barcode / Serial number / Batch number|
Vendor information

Name|
Address|
Contact numbe| | Postal code|
Sales date| | Invoice number|
Remark|

Authorized by Hyundai Corporation Authorized Party: Shenzhen Hyundai Digital Electronics Co., Ltd. Address: 601A, Chentian Research and Development Building, No. 50, Baotian 1st Road, Xixiang Street, Bao’an District, Shenzhen City, HYUNDAI Creative (Shenzhen) Technology Development Co., Ltd. 1915, Block A, Rongchuang Zhihui Building, intersection of Long Sheng Road and Jing Long Construction Road, Shang Fen Community, Minzhi Street, Longhua District, Shenzhen.

FCC Statement
According to Part 15 of the FCC Rules, this device has been tested to meet the restrictions for Class B digital devices. These restraining decrees In providing reasonable protection against harmful disturbances in residential facilities. The device generates and uses radiofrequency energy,If this instruction is not installed and used in accordance with the regulations, it may cause harmful interference to radio communications. However, there are There is no guarantee that interference will not occur in a particularinstallation. If this device has built for radio or television reception Intoharmful interference, the device can be determined by turning it off and onwhen the user is encouraged to try to pass through one or Several moremeasures below

• Redirect or reposition the receiving antenna. Increase the distance between device and receiver.
• Sockets connected to devices on circuits different from the receiver are connected.
• Please consult a dealer or experienced radio/TV technician for assistance.

This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions

1. The device shall not cause harmful interference.
2. The device must accept any received interference, including interference that may cause unexpected operation.

Changes or modifications that are not explicitly approved by the compliance responsible party may invalidate the user’s permission to operate the device This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>