HYUNDAI FOB-4FA2U44 FOB Smart Key User Guide

HYUNDAI FOB-4FA2U44 FOB Smart Key User Guide

Outline & Description

1. The Outline of FOB-4FA2U44
   – This unit is a Transmitter.
   – FOB-4FA2U44 is a part of Remote Keyless System.
   – This unit controls door lock/door unlock/trunk open/ panic/remote start- stop/forward/backward/frunk
   – This unit also uses UWB signals to enhance security of vehicle, which automatically communicates with the ibu regardless of button

2. Description of FOB-4FA2U44
   (1) Introduction
   – This unit has 8 buttons.
   – This unit uses a battery(CR2450)
   (2) Electrical Characteristics
   (3) Center Frequency : UHF 433.92MHz, UWB 8GHz
   (4) Antenna type: PCB Pattern Antenna
   (5) Antenna Gain:
   – 433.92 MHz: -11.48 dBi
   – UWB: -5.56 dBi
   (6) GENERAL DESCRIPTION
   PRIMARY Function
   – door lock/door unlock/trunk open/panic/remote start- stop/forward/backward/frunk
   – Operating voltage: 3V DC
   – Center freq.: 433.92MHz
   UWB Function
   – UWB signals to enhance security of vehicle, which automatically communicates with the ibu regardless of button

FCC/ISED NOTICE
[FCC] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could avoid your authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC
[ISED] This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the ISED

Grant Restriction
15.521(a)
– UWB devices may not be employed for the operation of toys.
– Operation onboard an aircraft, a ship or a satellite is prohibited.

15.519(a)(2)
– Antennas mounted on outdoor structures such, as antennas mounted on the outside of a building or on a telephone pole, or any fixed outdoors infrastructure are prohibited for use with this device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>