HYUNDAI HY-T17 True Wireless Earphones User Manual

HYUNDAI HY-T17 True Wireless Earphones

Please read all instructions carefully and retain them for future use

Usage Instruction

1. Don’t attempt to disassemble the unit and change any part, except if there is an operation method mentioned in the manual.
2. Don’t expose the unit to liquid, moisture or humidity, since it is not a waterproof product.
3. Disconnect the unit with your BT device and move it to the safe area if the liquid get inside the unit.
4. Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
5. Don’t expose the unit to extremely high temperatures or dispose of the unit in fire as it will result in an explosion.
6. Don’t place the unit in an electromagnetic interference environment to avoid malfunction.

Packing list

Product schematic description

Product specification

• BT Version: VS.3
• Transmission distance : 10M
• Battery capacity: 25mAh
• Playing time : About 4 hours (Earphones)
• Charging time : About 1 hour (Earphones)
• Rated input: SV =2&nA

Charging case specification

• Battery capacity: 200mAh
• Charging time; About 1.5 hours
• Rated input : 5V =1 SOmA

(All technical information is subject to actual performance)

To Charge the case
Connect the Type-C cable to the 5V power adaptOf’, and another end to the charging port of the Charging Case.

LEO Indicator Status

Case LED Indicator

• Charge the charging case (not fully charged): The Indicator light will flash In red.
• The charging case is fully charged: Rad light is always on.
• Discharge display; The blue light is always on.
• Low battery Indicator: The blue light flashes.

Product operating instructions

Power on

• Method 1: Remove from the charging compartment, and the headset automatically turns on.
• Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones.

Power off

• Method 1 : Put the headphones into the charging case directly and close the case to turn off.
• Method 2: Touch the MF button of the headphones for 5s to turn off the headphones.

Pairing to the BT device

• Step 1 : Open the upper cover of the charging compartment to remove the headphones, binaural automatic pairing;
• Step 2 : Open the BT list of smart devices, search 1-IY-T17″ and Connect (single ear use Is supported).

Touch control button operating

Music playing mode

Left/Right headphone operating

Hands free function

Left/ Right headphone operating ( incoming call)

Active the voice assistant function (the smart devices support voice assistant function)

Left/ Righi headphone operating

Restore factory settings

After turning on the phone without pairing stale, click the headse1 function key 5 times to clear 1he pairing information and then turn off the phone.

Name and content of hazardous substances in products

• Name and content of hazardous substances in products

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

Authorized by Hyundai Corporation

• Authorized Party: Shenzhen Hyundai Digital Electronics Co., Ltd.
• Address: Address: 601A, Chentian Research and Development Building, No. 50, Baotian 1st Road, Xixiang Street, Baoan District, Shenzhen City.
• Manufacturer: HYUNDAI Creative (Shenzhen)Technology Development Co., Ltd.
• Address: Room 1915, Block A, Rongchuang Zhihui Building, Intersection of Longsheng Road and Jinglong Jianshe Road, Shangfen Community, Minzhi Street, Longhua District, Shenzhen,China

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>