GLAIA TWS-810 True Wireless Metal Bluetooth Earphone User Manual
- June 14, 2024
- GLAIA
Table of Contents
GLAIA TWS-810 True Wireless Metal Bluetooth Earphone
Product Information
Specifications
- Compliance: FCC part 15
- Interference: Accepts any interference received
- Radiation Exposure: Meets general RF exposure requirement
- Portable Usage: Can be used in portable exposure condition without restriction
Product Usage Instructions
FCC Compliance
This device complies with part 15 of the FCC rules. It is designed to
operate without causing harmful interference to other devices. It must accept
any interference received, including interference that may cause undesired
operation.
Modifications
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Therefore, it is important to refrain from making any unauthorized
modifications to the device.
Radiation Exposure
The device has been evaluated to meet general RF exposure requirements.
This means it can be used in portable exposure conditions without any
restrictions. However, it is advisable to follow general safety guidelines for
electronic devices.
Frequently Asked Questions (FAQ)
-
Q: What is FCC part 15 compliance?
A: FCC part 15 compliance refers to the device meeting the regulations set by the Federal Communications Commission (FCC) in part 15 of their rules. These rules ensure that the device operates within acceptable limits and does not cause harmful interference. -
Q: Can I modify the device?
A: No, any changes or modifications to the device that are not expressly approved by the party responsible for compliance can void the user’s authority to operate the equipment. It is recommended to use the device as intended without any unauthorized modifications. -
Q: Is there any radiation exposure risk?
A: The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without any restrictions. However, it is always advisable to follow general safety guidelines and maintain a reasonable distance from the device during usage.
Product Images
Product Specification
- Product Name: True Wireless Metal Bluetooth Earphone
- Sound System: Wireless Stereo
- Control Mode: Fingerprint touch of earphones; Press button of charging case
- Work Time: About 5H
- Support Protocol: AVCTP,AVDTP,AVRCP,HFP,SPP,SMP,ATT/GAP / GATT/RFCOMM/SDP
- Bluetooth Operating Frequency: 2.4GHz-2.4835GHZ
- Audio Decoding: MP2,MP3, WMA,APE,FLAC,AAC, MP4, M4A, WAV,AIF,AIFC.
- Transmission Distance: 210M
Electrical Parameters of Earphone
- Quiescent Current of Earphone: 8.7-9.8uA
- Standby Current of Earphone: 0.1-0.15A
- Call Current of Earphone: 12.6-13.4mA
- Charging Current of Earphone: 30mA
- Earphone Battery Capacity: 30mAh
Electrical Parameters of Charging Case
- Charging Port: Type-C
- Input Voltage and Current of Charging Case: 5V1A
- Input Voltage of Charging Case: 5V
- Quiescent Current of Charging Case (Without Earphones) : 41uA
- Quiescent Current of Charging Case (Without Earphones) : 74uA
- Wired Charging Current of Charging Case: 300+20mA
- Charging Case Battery Capacity: 500mAn
- Wired Charging Time of Charging Case : ≤2.5H
Function Description
- Turn On: The earphone will automatically turn on when the charging case be opened.
- Turn Off: (1) The earphone will be turned off when earplugs be put in the charging case and the case be shut down; (2) The earphone powers off after long-pressing the fingerprint touch area for 5s; (3) The red light flash 3times and the earphone turns off when it not contact with Bluetooth device within 3 minutes.
- TWS paring is successful: when earplugs are turned on, the left and right earplugs enter paring mode immediately, the main earplug alternately in red and blue lights, while the secondary earplug does not; After paring is successfully, lights go out.(Unsuccessful pairing: 1. Disconnect the Bluetooth device. 2. The LED lights on both earplugs blink alternately red and blue light; 3. Click the left earplug five times.4. The primary earplug blinks alternately red and blue light, and the secondary earplug does not blink, the pair is successfully paired. If the operation is unsuccessful, turn off both earplugs and repeat the above operations.)
- Bluetooth is connected: (1) The earphone enters the pairing state after the Bluetooth device searches to the Bluetooth pairing name, click it and connects; (2) Bluetooth devices that have been connected, the left and right earplugs will automatically reconnect after being turned on.
- Bluetooth disconnected: (1) Turn off the Bluetooth device manually;2) After the earphone is disconnected from the Bluetooth device, it returns to the effective range within 3 minutes, and the Bluetooth device can be connected back to the device normally. If it is over 3 minutes, the earphone will automatically shut down.
- Pause/Play: Click any earphones once.
- Previous Song: Double-click the left earphone.
- Next Song: Double-click the right earphones.
- Volume Up+: Triple-click right earphone when the volume is increased to the maximum, there is a prompt tone” maximum volume”
- Volume Down-: Triple click left earphone.
- Music Mode/Game Mode switch: Press the function key on either earplug 4times in a row, voice prompt music mode/game mode.
- Siri: Long press the multi-function key of any earplug for about 25 to enter the siri control mode, when entering, there’s a prompt tone “Di”.
- Answer/Hang Up: Click any earphones once.
- Refuse: Long press the multi-function key of any earphone for about 2S.
- Turn off/on the charging case lighting effects: Press the charging case button once
- Turn off/on the charging case sound: Long press the charging case button, there’s a prompt tone “BiBi”.
- To view the current remaining capacity of the charging case: Double Click the charging case button and observe the atmosphere lamp (1)
- Over 90% remaining capacity: Green light;
- 30%-90% remaining capacity:Orange light;
- 12%-30% remaining capacity:Red light;
- Less than 12% remaining capacity:Red light flashing.
Charging Indication
- Charging the earphone in the charging case: the red light of the earplug flashes, the blue eye breathing light flash, and it goes out when fully charged.
- Insert Type-C to charge the charging case: The atmosphere lamp flashes 90s and turns off. When fully charged, the atmosphere lamp flashes green twice; you can double-click the charging case.(Refer to item 17 of the function description)
- Low battery warning: When the power of the charging box is lower than 12%, open and close the cover of the charging case/cut off the charging. After activating the charging box, the red light will flash and go out 105 later
Tips:
- During the charging process of the earphone, the earphone is turned off and the connection with the Bluetooth device will be disconnected. The power adapter must be 5V#0.2V.
- After the earphone is turned on, if the Bluetooth device does not find the earphone, you can turn off the Bluetooth of the Bluetooth device and then turn on the Bluetooth of the Bluetooth device again, and the Bluetooth device will search again.
- When the left and right earplugs are unpaired, disconnected from the Bluetooth device and click the left earplug for Stimes. After hearing the prompt tone ‘Di”, the left ear is connected.If no, repeat the operation.
- When the earphone is not charged, check the earphone charging contactand the charging contact of the charging case. Sometimes the surface insulation causes not charge due to sweat and dirt. Please wipe the dirt off the surface with a dry cloth and put it into the charging case for charging after seeing that the surface is clean.
Precautions:
- Do not use corrosive cleaners to clean this product.
- Do not allow this product to be heated or close to a fire source.
- Do not expose this product to direct sunlight for a long time.
- Do not dispose of this product in fire to avoid explosion.
- Do not attempt to disassemble this product for any modification.
- If this product is not used for a long time, please store it in a dry environment, and charge the earphones at least once a month to prolong the life and avoid extreme temperature and dust
FCC
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any inte rference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.