HYUNDAI LP5 True Wireless Earphones User Manual
- May 15, 2024
- HYUNDAI
Table of Contents
HYUNDAI LP5
**True Wireless Earphones
Manual
**
Please read all instructions carefully and retain for future use
Usage Instruction
- Don’t attempt to disassemble the unit and change any part, except there is operation method mentioned in the manual.
- Don’t expose the unit to liquid, moisture or humidity, since it is not a waterproof product.
- Disconnect the unit with your BT device and move it to the safe area if the liquid get inside the unit.
- Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
- Don’t expose the unit to extremely high temperature or dispose of the unit in fire as it will result in an explosion.
- Don’t place the unit in an electromagnetic interference environment to avoid malfunction.
Packing list
Product schematic description
Product specification
BT Version: V5.3
Transmission distance: 10M
Battery capacity: 35mAh
Playing time : About 3.5 hours ( headphone )
Charging time : About 1 hour ( headphone )
Rated input: 5V ****35mA
Charging case specification
Battery capacity: 250mAh
Charging Time : about 1.5 hours
Rated input : 5V **250mA
(All technical information is subject to actual performance)
To Charge the case**
Connect the Type-C cable to the 5V power adaptor, and another end to the
charging port of the Charging Case.
(Tips: Please charge the case in time when the LED indicator of the case flash
in green after closing the charge case)
Input: 5V 35mA (headphone)
Input: 5V 250mA (Case)
LED Indicator Status
Headphone LED Indicator| • Turn on the headphone: The LED indicator on the
host headphone flashes in White and Blue, and the subordinate headphone LED
indicator is off.
• Paired with Bluetooth device: The LED indicator on both headphones is off.
• Being Charging: The LED indicator on both headphones flash in White.
• Fully Charged: The LED indicator on both headphones is off.
• Power on: Blue light on for 1 second
• Shutdown: White light flashes 3 times
• Low battery: White light flashes twice every 5 seconds
---|---
Case LED Indicator| • To Charge the headphone: Put the headphone into the
charge case, the led indicator on the charge case will light up in green, and
will turn off when the battery is fully charged.
• Low battery: The led indicator will flash in Green.
• To charge the charge case: The led indicator on the case will flash in White,
once the battery is fully charged, it will stay in White.
---|---
Operating instruction
-
Power on:
Method 1: Open the case, the headphones will turn on automatically.
Method 2: Long touch the MF button of the headphones for 2s to turn on the headphones. -
Power off
Method 1 : Long touch the MF button of the headphones for 5s to turn off the headphones.
Method 2 : Put the headphones into the charging case directly and close the case to turn off. -
Pairing to the bluetooth device
Step 1: Open the case, The left and right headphone will automatically turn on and pair with each other.
Step 2: Activate the Bluetooth function on your mobile device, search and select the“LP5” from the list of available Bluetooth devices. ( Single headphone is workable too)
Touch control button operating Music playing mode
Left/Right headphone operating
Hands free function
Left/ Right headphone operating ( incoming call)
Active /close the voice assistant function (the smart devices support voice
assistant function)
Left/ Right headphone operating
Reset
When you turn on the headphone, make sure it does not connect to any BT
device, and click the MF button 5 times to clear the pairing record, then turn
off the headphone.
Name and content of hazardous substances in products
Name and content of hazardous substances in products
| Part Name | Harmful materials |
|---|---|
| Pb | Hg |
| Printed circuit assembly | |
| Small structural parts such as shell |
This form is compiled in accordance with SJ/T 11364.
：Indicates that the content of the hazardous substance in all homogeneous
materials of the part is in Below the limit requirements specified in GB/T
26572.
：Indicates that the content of the hazardous substance in at least one of the
homogeneous materials of the part exceeds The limit requirements specified in
GB/T 26572.
The parts marked with “X” on the form are all harmful due to the limitations
of global technological development.Substitution of substances.
Printed circuit board components*: including printed circuit boards and their
parts, electronic components, etc.,Depending on the product model, the product
you purchased may not contain all the above components.
Electronic and electrical products sold in the People’s Republic of China must
mark this Logo, the number in the logo represents the product under normal use
Environmental protection use period.
Warranty statement
Disclaimer
This user manual does not have any form of guarantee, position expression or
other implication.The mentioned products, specifications and information are
for reference only, and the content will also be updated on the webpage at any
time, without additional line notification.
Warranty statement:
The product attached to this document is guaranteed as follows: If the product
is twelve (12) months from the date of purchase (“Warranty Period”), under
normal conditions of use due to quality defects damaged, can be repaired free;
if the manufacturer confirms
Warranty Service
Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!
User info
User name| | Email|
Contact number| | Postal code|
Mailing address|
Product information
Product name| | Product number|
Product barcode / Serial number / Batch number|
Vendor information
Name|
Address|
Contact number| | Postal code|
Sales date| | Invoice number|
Remark|
Authorized by Hyundai Corporation
Authorized Party: Shenzhen Hyundai Digital Electronics Co., Ltd.
Address: 601A,Chentian Research and Development Building, No. 50, Baotian 1st
Road,Xixiang Street, Bao’an District, Shenzhen City.
HYUNDAI Creative (Shenzhen)Technology Development Co., Ltd.
1915, Block A, Rongchuang Zhihui Building, intersection of Long Sheng Road and
Jing Long Construction Road , Shang Fen Community, Minzhi Street, Longhua
District, Shenzhen.
HYUNDAI
Certificate of Approval
Product No:——————–
Production Time:————
QC:——-
F C C Statement
According to Part 15of the FCC Rules,thisdevice has been tested to meet the
restrictions for Class B digital devices. These restraining decrees In
providing reasonable protectionagainst harmful disturbances in residential
facilities. The device generates and uses radiofrequency energy,If this
instruction is not installed and used in accordance with the regulations, it
may cause harmful interference to radiocommunications.
However,there are There is noguarantee that interference willnot occur in a
particular installation. If this device has built for radio or television
reception Into harmful interference, the device can be determined by turning
it off and onwhen the user is ncouraged to try to pass through one or Several
more measures below
- Redirect or reposition the receiving antenna.
- Increase the distance betweendevice and receiver.
- Sockets connected to devices on circuits different from the receiver are connected.
- Pleaseconsult a dealer or experienced radio/TV technician for assistance.
This device complies with Part 15 of the FCC Rules.Theoperation is restricted by the following two conditions
- The device shall notcause harmful interference.
- Thedevice must accept any received interference, including interference thatmay cause unexpected operation.
Changes or modifications that are not explicitly approved by the compliance
responsible party may invalidate the user’s permission to operate the device.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>