HYUNDAI LP40 True Wireless Earphones User Manual

HYUNDAI LP40 True Wireless Earphones

Please read all instructions carefully and retain for future use

Usage Instruction

1. Don’t attempt to disassemble the unit and change any part, except there is operation method mentioned in the manual.
2. Don’t expose the unit to liquid, moisture or humidity, since it is not a waterproof product.
3. Disconnect the unit with your BT device and move it to the safe area if the liquid get inside the unit.
4. Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
5. Don’t expose the unit to extremely high temperature or dispose of the unit in fire as it will result in an explosion.
6. Don’t place the unit in an electromagnetic interference environment to avoid malfunction.

Packing list

| Earphones X 2
---|---
| User manual X 1

| Charging case X 1

| Type-C X 1

Product schematic description

Product specification

BT Version: V5.3
Transmission distance: 10m
Battery capacity: 35mAh
Playing time : About 4 hours (Earphones)
Charging time : About 1 hours (Earphones)
Rated input: 5V ⎓ 30mA

Charging case specification

Battery capacity: 250mAh
Charging time : About 1.5 hours
Rated input : 5V ⎓ 230mA
Playing time : About 20 hours (Charging case) (All technical information is subject to actual performance)

Charge the charging case
Connect the charging case to the 5V power adapter with the Type-C charging cable.

(Tips: When the white light of the charging case bin blinks, please charge the charging case bin in time.)

Case LED Indicator

• Charge the charging case,it flashs red light.After full charge,the red light is always on.

Product operating instructions

1. Power on
   Method 1 : Open the case, the earphones will turn on automatically.
   Method 2 : Long touch the MF button of the earphones for 3s to turn on the earphones.

2. Power off
   Method 1 : Put the earphones into the charging case directly and close the case to turn off.
   Method 2 : Turn on the left and right earphones and hold down the touch button for 5 seconds to turn off the earphones.

3. Pairing to the BT device
   Step 1 : open the upper cover of the charging case, and the main and auxiliary earphones will automatically connected;
   Step 2 : open the BT list of smart devices, search “LP40” and Connect (single ear use is supported).
   

Touch control button operating Music playing mode

Left/Right earphone operating

Hands free function

Left/ Right earphone operating ( incoming call)

Active the voice assistant function (the smart devices support voice assistant function)

Left/ Right earphone operating

Restore factory settings

If a single earphone is not paired with a mobile phone after being powered on, click the function button of the earphone five times to clear the pairing information after the shutdown.

Name and content of hazardous substances in products

This form is compiled in accordance with SJ/T 11364.
0 Indicates that the content of the hazardous substance in all homogeneous materials of the part is in Below the limit requirements specified in GB/T 26572. X Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds The limit requirements specified in GB/T 26572.
The parts marked with “X” on the form are all harmful due to the limitations of global technological development.Substitution of substances.
Printed circuit board components”: including printed circuit boards and their parts, electronic components, etc.,Depending on the product model, the product you purchased may not contain all the above components
| Electronic and electrical products sold in the People’s Republic of China must mark this Logo, the number in the logo represents the product under normal use Environmental protection use period.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

User info

User name| | Email|
Contact number| | Postal code|
Mailing address|
Product information
Product name| | Product number|
Product barcode I Serial number/ Batch number|

Vendor information

Name|
Address|
Contact number| | Postal code|
Sales date| | Invoice number|
Remark|

 Authorized by Hyundai Corporation

Authorized Party: Shenzhen Hyundai Digital Electronics Co., Ltd.
Address: Address: 601A,Chentian Research and Development Building, No. 50, Baotian 1st Road,Xixiang Street, Bao’an District, Shenzhen City.
Manufacturer: HYUNDAI Creative (Shenzhen)Technology Development Co., Ltd.
Address: Room 1915, Block A, Rongchuang Zhihui Building, Intersection of Longsheng Road and Jinglong Jianshe Road, Shangfen Community, Minzhi Street, Longhua District, Shenzhen,China

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.

Operation is subject to the following twoconditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC ID:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>