CREATE WINDLIGHT Ceiling Fan User Manual

: June 3, 2024
: CREATE

Table of Contents

CREATE WINDLIGHT Ceiling
LIST OF PARTS
SECURITY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION PREPARATION
REMOTE CONTROL
CEILING FAN WITH LED LIGHT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CREATE WINDLIGHT Ceiling

Thank you for choosing our ceiling fan. Before using the appliance, and to ensure the best use, please read these instructions carefully.
The safety precautions included in this document reduce the risk of death, injury, and electric shock when properly followed. Keep the manual in a safe place for future reference, along with the complete warranty card, sales receipt, and package. If applicable, please forward these instructions to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance. We do not assume any responsibility for the breach of these requirements by the customer.

LIST OF PARTS

Carefully open the packaging and remove all included items.
Place them on a rug or a large piece of plastic to avoid any damage.
Check that all the items listed below have been included.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.
Read this entire manual carefully before beginning installation. Save these instructions.
Use only original spare parts.
To reduce the risk of personal injury, connect the fan directly to the building support structure in accordance with these instructions and use only the supplied hardware.
To avoid possible electrical shock, before installing your fan, disconnect power by turning off the circuit breakers in the outlet box and the associated wall switch location.
If you cannot lock the circuit breakers in the off position, securely attach a prominent warning device, such as a tag, to the service panel.
All wiring must be in accordance with national and local electrical codes and ANSI / NFPA 70. If you are unfamiliar with wiring, contact a qualified electrician.
To reduce the risk of personal injury, do not bend the blade clamping system when installing, balancing, or cleaning the fan.
Never insert foreign objects between the rotating fan blades.
To reduce the risk of fire, electric shock, or motor damage, do not use a solid state speed control with this fan. Use only original speed controls.
This appliance can be used by children from 8 years of age and by people with reduced physical, sensory or mental abilities or lack of experience and knowledge if they have been supervised or instructed in the safe use of the appliance and understand the dangers involved. Children must not play with the appliance. Children should not perform cleaning or maintenance unless they are over 8 years old and supervised. Close supervision is necessary when any appliance is used by or near children.
TIP: The important safety precautions and instructions in the manual are not intended to cover all possible conditions and situations that may occur. It should be understood that common sense and caution are necessary factors in the installation and operation of this fan.

INSTALLATION INSTRUCTIONS

Mark the correct position of the holes and fix the ceiling bracket using the screws with metal plugs or screws and washers suitable for the type of ceiling chosen.
Check the correct installation of the bracket before hanging the fan. This plate must support the full weight of the fan.

INSTALLATION PREPARATION

To avoid personal injury and damage, make sure the place to hang the sheets leaves a clearance of 2.3 m from the ground and 76 cm from any walls or obstructions.
Make sure the outlet box is securely attached to the building structure and can support the full weight of the fan.

MOUNTING BRACKET ATTACHMENT

The outlet box and beam must be securely mounted and capable of reliably supporting at least the weight of the fan.
Wood roof
Securely attach the mounting bracket with wood screws and washers to the ceiling joints.
Concrete ceiling
Drill holes with an 8mm drill, depending on the length of the expansion screws. Next, secure the mounting bracket to the ceiling with the expansion screws.
Do not fix the mounting bracket directly on ceilings less than 10mm thick to avoid the risk of screw loosening.

REMOTE CONTROL

Light
On/off button
Fan intensity control
Timer
Batteries (2 x AAA)
Color temperature control
Fan intensity control
Inverse function

The function is only available when the LED board is installed.

REMOTE CONTROL CONNECTION

Make the connection between the receiver wires and the fan motor wires following the color indications. Make sure the connection is firm.

RECEIVER PLACEMENT

Attach the motor to the left hook, and then lead the wiring.
TIP: Someone else should help you hold the ladder and hand you the fan after you get on it.

MOUNTING THE BLADES

TIP: Blade bolt washers can be attached to each bolt prior to installing blades. Align the juicers on the blades with the screw holes on the motor. Tighten all the screws once you have hooked the blades. Before permanently fixing the screws, repeat this process with the remaining ones.

ASSEMBLING THE CONNECTION PANEL

Attach the connection plate to the bottom of the fan by inserting the heads of the fixing screws into the holes intended for this. Drive in the screws and then secure them.

CEILING FAN WITH LED LIGHT

LED PANEL AND DECORATIVE SCREEN

Connect the single-pin plugs on the backplane with those on the LED panel. The LED panel is magnetized so it will be attached to the patch panel simply by snapping them together.
TIP: While installing or removing the LED board, keep the insulation pads intact carefully. Turning the setscrews too hard or too quickly will damage the insulation pads.
Screw the lampshade back onto the connection plate.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one-for-one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated, and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves the application of administrative sanctions according to the laws.