COOSPO BC26 GPS Bike Computer User Manual

USER MANUAL

GPS Bike Computer
Model： BC26

Button function

Up Left ∧
Short Press: Switch Data Type / Numerical Value

Left Down
Short Press: Switch Data Type / Numerical Value Long Press: Enter / Exit Setting Mode
Right Button
Short Press: Power on / Start Riding /
Switch Settings Long
Press: Power off / End the ride

Status Icons

| Time
---|---
| No satellite signal
| Satellite signal level
| Alert sound on/off
| Riding
| Bluetooth connected
| Battery level
AVG| Average speed
MAX|  Maximum speed
MPH|  Miles per hour
TIME| Riding time
DST| Distance
ALT| Altitude
ODO| Odometer (Total distance)
TOT| Total riding time
UTC| Time zone
h| Hour
Ft/Km/m/mi| Unit
KHM| Kilometers per hour
| silent

Standard accessories

How to Install

Charging

1. Please charge the device before first-time use.
2. Please use DC 5V power adaptor for charging.
3. During the charging, the battery icon will until fully charged.

The product has a built-in battery. Do not throw the product into a fire. Please choose an adapter that meets the rated voltage of the device to charge the device to avoid damage to the device.

Acquiring Satellite Signals, Time Setting, and Auto Backlight

Acquiring Satellite Signals This device can use a speed sensor or GPS for speed tracking when using please make sure the device is outdoor and under a clear view of the sky. Usually, it may take 15-90 seconds for the bike computer to locate satellite signals, remain stationary when acquiring satellite signals. Time Setting
The time and date will be calibrated automatically after locating the satellite signals(Check how to set the time zone correctly, please refer to the time zone setting chapter).
Auto Backlight
This device will automatically calculate the sunrise and sunset time, from the time half an hour before sunset to half an hour after sunrise, the backlight will be automatically lighted; the backlight will be turned off if no operation is detected in 15 seconds.

Time Zone Setting

1.1 Long press  to enter the setting mode (P1-P3), P1 time zone setting, the currently set numerical value flicker display;
1.2 Short press VA to switch numerical value;
1.3 Short press  to confirm the current setting, and enter the next digit or the next setting (P2 metric / imperial setting);
1.4 The device will automatically save and exit after 15s of no operation or long-press to exit the setting.

Setting Metric and Imperial Units

1.1 Long press # to enter setting mode (P1-P3), short press MI to enter P2 metric / imperial setting;
1.2 Short press VA to switch between metric (KMH) / imperial (MPH);
1.3 Short press Hi to confirm the current setting and enter the next setting (P3 speed alert setting).

Maximum Speed Alert Setting

1.1 Long press to enter the setting mode (P1-P3), short press ►fl to enter the P3 maximum speed alert setting, the currently set numerical value flicker display;
1.2 Short press to switch numerical value;
1.3 Short press ►11 to confirm the current setting and enter the next digit setting or the next setting;

1.4 Short press to VA sets the prompt tone on / off, after the setting is completed, Long press # to exit or no operation for 15s to automatically save and exit.

GPS Positioning

1. Auto GPS positioning after the bike computer is powered on. Please start cycling after the GPS positioning is successful.
2. Please make sure you are outdoor when positioning. Bad weather and dense forests may affect GPS signals. You can stand still for 3-5 minutes to get more connections with satellites for a better GPS signal.
3. If you lost GPS Positioning during riding, the speed data (real-time, average, maximum) will be displayed as’ e.- “, and the rest of the data remains the same.

Cycling

Turn on the device, short press MI to start riding, short press 4I to pause/start; Long pres9il to end riding (when the speed is 0 or there is no data during riding, or when the speed is too low, the bike computer will automatically pause MI / automatic start ► ; When there is no speed data during riding, the cycling computer will automatically enter dormant after 15 minutes, and it will return to the previous riding state after pressing NI to turn it on).

Riding Data Display

1.1 Snort press ∧cycle to switch real-time speed, maximum speed, and average speed.
1.2 Short press ∨cycle to switch time, distance, altitude, and time & distance display mode automatically switch data.

* Bluetooth Connection

1. Download CoospoRide in Google Play or App Store
   * Compatible with
   iOS 9.0 version and above, iPhone 4s and above
   Any Bluetooth 4.0 enabled Android device with Android 4.3 and above

2. Power on the bike computer;

3. Open the CoospoRide App, enter the binding cycling computer step, select the BC26 bike computer in the device list to bind the device, (the phone needs to turn on Bluetooth and allow Bluetooth permissions);

4. In the activity page of the App, click on the connected device to enter the record synchronization operation page (through the authorization to Strava in the App more settings, the computer data can be synchronized to the Strava platform at the same time);

5. Select the record to be synchronized and click e Sync, and the record on the bike computer will be deleted automatically after synchronization.
   

Basic Parameters

Manufacturer: Shenzhen Fitcare Electronics Co., Ltd.
Address:6th Floor(south), Building A, Dingxin Science Park,
Hong long North 2nd Road, 67 District, Baoan, Shenzhen, China.

Attentions
The water-resistant level of the bicycle computer is IPX7. It can be used in the rain if you close the protective cover on the back tightly. It is recommended to take down the bicycle computer and put it into the waterproof bag if it rains heavily.

Responsibility Disclaimer

• The information contained in this manual is just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
• We shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or in connection with this manual or the contained product.

Button Function

Up Left
Short Press: Switch Data Type / Numerical Value
Left Down
Short Press: Switch Data Type / Numerical Value Long press: Enter/ Exit Setting Mode
Right Button
Short Press: Power on / Start Riding/ Switch Settings Long press: Power off / End the ride

**NOTE:** This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>