urbanista Phoenix Solar Powered Earphones User Manual

: June 8, 2024
: urbanista

Table of Contents

Product Overview
POWER ON AND OFF
FIRST-TIME PAIRING AND RECONNECTING
MULTIPOINT CONNECTION
TOUCH CONTROLS
CHARGING AND BATTERY
THE URBANISTA AUDIO APP
SILICONE TIPS
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

urbanista Phoenix Solar Powered Earphones User Manual

Product Overview

Thank you for choosing an Urbanista product.

POWER ON AND OFF

The earphones automatically power on and off as you open and close the charging case lid. Five minutes of disconnect or 30 minutes of inactivity will automatically power off. If your earphones are automatically powered off outside the charging case, you can press the left and right sides separately for 5 seconds to power them on.

FIRST-TIME PAIRING AND RECONNECTING

Open the charging case lid to initiate first-time pairing. The LED will first indicate the charging case battery level, then start flashing to indicate pairing mode. Go to the Bluetooth settings on your device and select “Urbanista Phoenix” to connect. The LED will stop flashing as the earphones successfully connect. The earphones will automatically try to reconnect to the last connected device(s) every time they are powered on.

MULTIPOINT CONNECTION

Phoenix can be connected with two Bluetooth devices simultaneously through Multipoint Connection. It allows you to seamlessly switch between devices, such as a computer and phone, without having to disconnect first.

Pair and connect to a second device

Open the charging case lid to activate pairing mode
The earphones will connect to your first device but remain in pairing mode
Go to the Bluetooth settings on your second device and select “Urbanista Phoenix” to pair and connect
The earphones are now connected to both devices

The earphones can pair with and store up to 8 devices, and will multipoint connect to the last two devices every time it’s powered on. Multipoint does not allow audio from two devices to be played at the same time.

TOUCH CONTROLS

Use the double- and triple-tap commands to control music and calls. Left and right side long-press can be customized through the Urbanista Audio app.

Play/Pause: Double-tap left or right side.
Previous song: Triple-tap left side.
Next song : Triple-tap right side.
Answer/Hang-up: Double-tap left or right side.
Reject a call: Long-press left or right side.
Activate voice assistant: Long-press left side.
Toggle between ANC and Transparency: Long-press right side

CHARGING AND BATTERY

Urbanista Phoenix has a built-in PowerfoyleTM solar cell that continuously charges your earphones’ charging case whenever exposed to light – outdoor or indoor – providing you with virtually infinite playtime. The stronger the light, the more effective is the charging.
The earphones will automatically start charging when put back into the charging case. A “low battery” voice prompt will notify you when there are 30 minutes of playtime remaining, after which the earphones will automatically turn off.
Use the included USB Type-C cable connected to a power source to charge the case. The “Battery Status Indicator” (1) will pulse during charging and continuously lit when the case is fully charged.

0-30 % – LED pulses amber
30-100 % – LED pulses white
100 % – LED turns solid white

THE URBANISTA AUDIO APP

The Urbanista Audio app is the perfect companion for your Urbanista Phoenix earphones, available for both iOS and Android. The app allows you to customize features and personalize the way you use and experience your Urbanista products. Use the app to track Phoenix’ light charging performance and history to better understand and optimize its battery life

SILICONE TIPS

The included silicone tips come in three different sizes. Choose a size that comfortably fits your ears and provides an effective seal.

RESET

Should the earphones fail to connect, be unstable or unresponsive, please follow the below steps:

Put the earphones back in the charging case and close the lid. Reopen after 10 seconds to pair or reconnect to your device. Should the problem persist, please follow the below steps for a full reset
Delete “Urbanista Phoenix” from the Bluetooth settings on your device.
With the earphones in the charging case, press the reset button (2) for 10 seconds until the LEDs turn solid. The earphones will restart and initiate pairing mode.
Follow the instructions in “First Time Pairing and Reconnecting” to reconnect to your earphones.

TROUBLESHOOTING

If you have any additional questions, please visit our online help center where you will find our FAQs and an online version of this manual:
https://support.urbanista.com/

Company Logo