Alza WANBO X1 Mini Projector User Manual

X1 Mini Projector User Manual

Important Safety Precautions

The following safety instructions will ensure long service life of the machine, and avoid any fire or electric shock. Please ensure to read carefully and pay
high attention on all the following warnings

|
---|---
Don’t install in places with poor ventilation| Don’t install in places that hot and humid
|
Don’t block the vent (Inlet or Outlet)| Don’t install in dusty and smoky areas
|
Don’t install close to any temperature or smoking sensors (May cause sensors failures)| Don’t install in areas that directly blown bycold and warm wind of air conditioner (Otherwise, it may cause failure due to vapor condensation or rise of temperature)

Pay Attention to Heat Dissipation

Please leave at least 30cm between projectors and objects around to maintain projectors’ performance and reliability

Attention

Please avoid watching lens directly so as to prevent our eyes from being hurt as projectors are with very high brightness

Packing List

Please check if any accessory is missing when opening, please contactyour distributor if it has any shortage

Basic Parameters

Product Brief

Please check projector components and functions before using

Remote Control

Projection size/ Distance

Projection size (inch, no keystone correction)| Screen length * width (m)| Lens ~ screen (m)
---|---|---
50| 0.67×1.11| 1.5
72| 0.98×1.59| 2
84| 1.10×1.86| 2.5
100| 1.36×2.21| 2.84
120| 1.65×2.66| 3.5

Installation and Adjustment

Installation
You can place horizontal or via hanger installation.
Note: hanger is non-attached accessory !

Adjust Focal Length

Achieve satisfactory picture imaging effect via adjusting the keystone correction loop and focus wheel on the machine. When keystone distortion occurs (as per diagram 1), it is recommended to adjust the keysone correction loop; when the image is blurred (as per diagram 2), it is recommended to adjust the focus wheel to improve picture clarity. If satisfactory clarity can not be achieved followed steps above, please move the product forward or backward as appropriate.

Shutdown Safely

1. Press the button on the remote control to turn off the machine
2. Press the button on the back of machine body to turn off the machine.
   Note: Please pull out the plug in time to save energy once the machine is turned off.

Mobile phone screen/same screen
Connect with IOS Phone WAY1:

1. Click WiFi and find “WANBO X1-xxxxxx”, then input password “12345678” on your iPhone.
2. Click “Screen Mirroring”on your iPhone. WAY2:
3. Click “OK” on the remote control, connect home WiFi; Then connects the same WiFi on your iPhone.
4. Click “Screen Mirroring” on your iPhone.
   Connect with IOS Phone:

Connect with Android:

1. Click “Wireless Projection” on your phone.
2. Select “WANBO X1” , complete screen sharing.

Connect by Cables:

1. Connect iPhone and projector through “USB” port with Phone USB cable.
2. Click “Trust” .

Projection Setting Function details (Android)
Installation Mode
There are four installation modes (Front Projection, Rear Projection, Rear Projection Lifting, Front Projection Lifting). Users can choose installation mode by pressing the  left and right direction keys of the remote control, and install the projector as you like.

Keystone Correction
Keystone correction includes four-point keystone correction and vertical keystone correction. Users can choose four-point keystone correction or vertical keystone correction  by pressing the confirmation key or left and right direction key on the remote-control under keystone correction option.
Under the four-point keystone correction option: select manual keystone correction, press confirmation key in the remote control to enter the manual keystone interface,  then operate according to the screen prompts.
Under the Vertical Keystone Correction option: Screen option shows infinite zoom and manual keystone correction, infinite zoom can reduce or enlarged screen with an  adjustment range between 80% and 100%. Manual Keystone Correction adjusts value through left and right direction keys of the remote control to ensure pictures to be the best.
WIFI Connection Description: Enter setting option, click Network Settings, open the WIFI setting switch, select the network required. If no WIFI displayed, we can search and add WIFI manually.
Bluetooth Connection Description: Enter setting option, click Bluetooth setting, open the Bluetooth switch, choose Bluetooth device to match (Note:
Bluetooth can connect audio only but can not connect mobile phone.
Clarity Adjustment: Adjust focus first and then adjust distance of placement if not clear.

Mobile Phone Projection / Same Screen (Android Version)
Firstly, make sure Projector and mobile phone under the same WiFi, open Eshare of the projector, and then open video apps in your mobile phone (such as Youtube,  Netflix), click TV icon in the upper right corner of the video to project).
iPhone uses Airplay mirror for same screen and projection; Android phone can project directly with Eshare, Android computer can download Eshare or use HDMI cable to  complete projection.
Note: The above operations need to be done under the same WIFI, all devices should connect to the same WIFI (wireless network).

System upgrade (Android Version)
Upgrade online
Online update through system upgrade.
U disk upgrade (Local upgrade)
Copy the upgrade firmware to U disk root directory in FAT32 format, insert the U disk into the USB interface of projector, then select U disk upgrade.
Mandatory upgrade
Copy the upgrade firmware to U disk root directory in FAT32 format. Insert the U disk into the USB interface under turn off condition of the projector, meanwhile, long  press the device power button for 5 seconds to start automatic upgrade.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by  inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic  discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Projector
Model / Type: X1
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 18.8. 2022

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
• alza.at
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>