Shenzhen Pilot Technology BT5.0 True Wireless Stereo Earphone User Manual

June 5, 2024
Shenzhen Pilot Technology

Shenzhen Pilot Technology BT5.0 True Wireless Stereo Earphone

OVERVIEW

  1. earphone
  2. indicator light
  3. multifunctional button
  4. earbud LED lights
  5. charging box

Specification

  1. Bluetooth Version: BT5.0
  2. Call time: about 4.5 hours
  3. Music playtime: about 5 hours
  4. Charging time: about 2.5 hours
  5. Battery: Earphone: 60mAh
  6. Charging box: 400mAh
  • Power on, Pairing and Connection

    • Take the earphones out of the charging box, they will automatically power on and at the same time, indicator lights filash in blue. When one of indicator light flashes in red and blue alternately. two earphones automatically pair.
    • Open “Bluetooth” on your mobile phone and search “TWS03” to dlick it to connect.
    • When successfully pairing, the lights flash blue.
  • Note: If cannot pair successfully, pls take the earphones back to the charging box, and repeat the above steps to re-pairing.

  • Power off
    Put the earphones into the charging box for turning off automatically.

  • Music play/pause
    Click the “Multifunctional button” to play or pause music playing.

  • Answer Calls
    When a phone call in, you can hear a voice prompt, click any one of the “Multifunctional buttons” to answer the call (only one earphone can hear the voice). When finish talking, click any one of the “Multifunctional buttons” to end the call.

  • Reject Calls
    When a phone call in, you can hear a voice prompt, long-press any one of the “Multifunctional buttons” for about 2 seconds to reject the call.

  • Next song
    When playing music, long-press the”Multifunctional button of the vice earphone for 2 seconds.

  • Last song:
    When playing music, long-press the “Multifunctional button” of the main earphone for 2 seconds.

  • Volume up
    When playing music, quickly double-click the “Multifunctional button” of the vice earphone.

  • Volume down
    When playing music, quickly double-click the “Multifunctional button” of the main earphone.

  • Charging
    Charge the charging box: Use the charging cable and plug it to the input port of the charging box. When charging, LED lights flash; when fully charged, LED lights turn off.
    Charge the earphones: Put the earphones into the charging box. When charging, the indicator light is red; when fully charged, the indicator light is off.

  • Voice Assistant
    Quickly press 3 times of any “Multifunctional button”

  • Components

    • pair of earphones, Charging box(1pc) Instruction manual (1pc) Charging cable(1pc) A pair of earbuds in middle size,
    • pair of earbuds in small size

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals