alza W110-T Robotic Window Cleaner User Manual

alza W110-T Robotic Window Cleaner

Product Information

Product Name: W110-T Robot Windows Cleaner

Features:

• APP control through IOS/Android system
• For glasses thicker than 6mm
• AI Technology
• Cleaning speed: 2.5minutes/meter2
• 3 kinds of automatic operation modes for cleaning the entire window
• Auto-finish
• Embedded UPS (Uninterrupted Power System)
• Anti-dropping control algorithm
• Auto detect edges of window
• Micro-fiber cloth
• High-strength safety rope (152 Kgf)
• Remote control
• Table cleaning mode

Product Usage Instructions

Please read the following instructions carefully before first use and keep this user manual for future reference.

PRODUCT Safety Information

• Use only the power adapter supplied with this device. The use of other types of power adapters will result in malfunction and/or danger.
• Please use the proper electric outlet and make sure no heavy objects are placed on the power adapter power cord.
• Allow adequate ventilation around the adapter when using it to operate the device. Do not cover the power adapter with objects that will reduce cooling.
• Do not use the adapter in a high-moisture environment. Never handle the adapter with wet hands.
• Connect the adapter to a proper power source. The voltage requirements are found on the damper.
• Do not use a broken adapter, power cord, or plug. Do not attempt to service the adapter. There are no service parts inside. Replace.
• Always switch the device off before carrying out any cleaning or maintenance work to avoid the risk of electric shock.
• Never pull the power plug out of the socket by the power cord; instead, pull it out by the power plug itself.
• Never perform repairs on your device yourself. Repairs to electric devices may only be carried out by an authorized customer service center.
• Do not insert any pointed objects into the electric contacts. Do not change the contacts.
• Do not continue to operate the robot if the device itself or the power cord is damaged. Contact your local customer service in the event of damage.
• Do not clean the robot, the power cable in water, or other liquids.
• Do not use the robot on damp ground or in places in which it can get into contact with liquids or be immersed in water.
• Do not use the robot in hazardous areas such as open fireplaces, running showers, or swimming pools.
• Make sure that you do not damage, bend, or twist the power cord. Do not place any heavy objects on top of the cord. This could damage the power cord and cause a fire or electrical shock.
• Drooping or bare cables, curtains, tablecloths, or cords in the working area of the robot are to be secured to avoid damage to it or cause an electrical shock.

Product Usage

1. Make sure the power adapter is properly connected to a power source and the device.
2. Place the robot on the window to be cleaned and turn it on using the remote control.
3. The robot will automatically detect the edges of the window and start cleaning in one of the three automatic operation modes.
4. Once the cleaning is complete, the robot will automatically return to its starting position.
5. For table cleaning mode, place the robot on the table and turn it on using the remote control. The robot will clean the table automatically.
6. After use, turn off the device and unplug the power adapter from the power source and the device.
7. Clean the micro-fiber cloth with water and let it dry before using it again.

If you have any questions or comments about the device, please contact the customer line or visit www.alza.co.uk/kontakt or call +44 (0)203 514 4411.

Dear customer ,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

• www.alza.co.uk/kontakt
• +44 (0)203 514 4411

Importer   Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Note Read all documents before using

The appliance is not to be used by children. Persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge may only use this appliance if they are supervised or have been given instruction about how to use it safely and understand what risks are involved. Children should be supervised to ensure they do not play with the robot. The appliance is for windows cleaning with Frames Frameless glass/window cleaning is not applicable). Users should judge and use it safely on proper operation sites, and be responsible for all possible consequences.

Safety Information

Application of Power Adapter and Batteries

• Use only the power adapter supplied with this device. Use of another type of power adapter will result in malfunction and/or danger.
• Please use the proper electric outlet and make sure no heavy objects are placed on the power adapter power cord.
• Allow adequate ventilation around the adapter when using it to operate the device. Do not cover the power adapter with objects tat will reduce cooling.
• Do not use the adapter in a high-moisture environment. Never handle the adapter with wet hands.
• Connect the adapter to a proper power source. The voltage requirements are found on the damper.
• Do not use a broken adapter, power cord or plug.
• Do not attempt to service the adapter. There are no service parts inside. Replace the whole unit if it is damaged or exposed to high moisture. Consult your dealer for help and maintenance.
• The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, short contact, heat above 40°C (104°F), or incinerate.
• If you have to dispose of this old equipment, please take it to the local recycling center for recycling electrical and electronic parts.
• Retains the safety and operating instruction for future reference.
• Follow all operating and use instructions.
• Do not expose your device to rain or excess humidity, and keep it away from liquids (such as beverages, faucets, and so on).
• Avoid exposing your device to direct sunlight or intense light source, and keep it away from heat sources (such as radiators, space heaters, stoves, and so on.)
• Do not place the device in the vicinity of strong magnetic fields.
• Keep the device and accessories away from children.
• Product operating temperature: 0°C ~ 40°C (32° ~ 104°F).

Risk of electric shock!

• Always switch the device off before carrying out any cleaning or maintenance work.
• Never pull the power plug out of the socket by the power cord; instead, pull it out by the power plug itself.
• Never perform repairs on your device yourself. Repairs to electric devices may only be carried out by an authorized customer service center.
• Do not insert any pointed objects into the electric contacts.
• Do not change the contacts.
• Do not continue to operate the robot if the device itself or the power cord is damaged.
• Contact your local customer service in the event of damage.
• Do not clean the robot, the power cable in water or other liquids.
• Do not use the robot on damp ground or in places in which it can get into contact with liquids or be immersed in water.
• Do not use the robot in hazardous areas such open fireplaces, running showers or swimming pools.
• Make sure that you do not damage, bend or twist the power cord. Do not place any heavy objects on top of the cord. This could damage the power cord and cause a fire or electrical shock.
• Drooping or bare cables, curtains, tablecloths, or cords in the working area of the robot are to be secured in order to avoid damage to it or cause an electrical shock.

Warning

• Fasten the safety rope and tie to the indoor fixture before operating the device.
• Check if the safety rope is broken or the knot is loose before operating the device.
• Set danger-warning area downstairs for no-balcony window and door.
• The battery shall be full charged (green lamp ON) before using.
• Do not use it in rainy or moist day.
• Turn the power on before put device onto glass.
• Make sure the appliance can stick and stand on a glass surface while putting onto glass
• Before turn power off, please hold device.
• Do not use it on frameless glass.
• Make sure put the cleaning ring onto the cleaning wheel correctly for no leakage.
• Do not spray or pour water onto the appliance.
• Prohibit children from using this device.
• Remove anything on the glass. Do not use on cracked glass. Reflective or coating glass might be slightly scratched due to dirt on the glass while operating.
• Keep hair, loose clothing, fingers, and all parts of body away from the openings and moving parts.
• Do not use in areas with existing flammable or combustible liquids, gas.

About W110-T Robot Windows Cleaner

W110-T is a cleaning robot that works on multiple surfaces of glasses, tiles, smooth walls and tables. It works with a built-in vacuum motor that helps it suck air and stand on the glass surface. An embedded UPS (Un-in-terrupted Power System) prevents the robot falling from the window even when no electrical power. With two wheels that freely traverse on the window surface or on wall surface, W110-T cleans glass surface efficiently by the intelligent AI-technology path calculation. As well, it can be manually operated to clean under different modes from the remote control.

Features

• APP control through IOS/Android system
• For glasses thicker than 6mm
• AI Technology
• Cleaning speed: 2.5minutes/meter 2
• 3 kinds of automatic operation modes for cleaning entire window
• Auto-finish
• Embedded UPS (Uninterrupted Power System)
• Anti-dropping control algorithm
• Auto detect edges of window
• Micro-fiber cloth
• Hight strength safety rope (152 Kgf)
• Remote control
• Table cleaning mode

Specifications

• Input Voltage: AC100-240V
• Dimension: 291412cm
• Net Weight: 0.93KG
• Input Voltage:
• AC100-240V, 50/60Hz Adaptor
• 24V, 80W, 5.5m Cable
• Safe Standby Power
• Built-in Li-ion battery, 600mAh 14.8V
• Charging Time: hour

What’s in the package?

• Cleaner × 1 pcs
• Cleaning cloth x 14 pcs
• Remote controller × 1 pcs
• Adapter (100-240VAC, 50-60Hz) × 1
• AC power cord × 1 pcs
• DC power extension cable (4 meter) × 1
• User manual x 1
• Cleaning ring x 4
• Safety rope x 1

Packing

• Gift box dimension: 34.025.512.5cm
• G.W.: 1.4 KG N.W.: 0.93 KG

Know Your W110-T

Top View

1. Red Flashing: Abnormal
   • Blue On: Normal
   • Green On: Full-charged
   • Rose Red On: Charging
   • White On: Elecriferous Indication
2. Buzzer
3. Hooking Hole
4. Power Jack
5. Power Switch
6.  Air Vent
7. Bottom Red Light Flash: Abnormal Bottom Blue Light on: Normal

Power connection

1. Plug in
2. Tighten the screw

Switch On/Off Button

1. Long press 2s to turn on/off
2. When it’s on, press to start/pause

For safety, you must fix your W110-T to indoor fixture before use

Remote Control
The device can be remote controlled from the front and backside.

• Please remove the insulation spacer in the bottom of the back of the remote controller before using it. If you have to replace the battery, just pull down the battery cover.

Before Using

• The robot shall always connect the power cable for normal use.
• How to put the robot onto the glass tor start using?
  • Turn on the power switch, and then make sure the fan is running.
  • Put the device onto the glass and keep 10cm away from the window frame.
  • Check if the device can stick to the glass before releasing it.
• Hot to take the device down from the glass?
  • While the device is running, please hold the safety rope with one hand and take the device down from the glass with the other hand.
  • Turn off the power switch in a safe area.
• Safe rope and buckle
  • Before using, check if the safety rope is broken or the knot is loose.
  • Fasten the safety rope and tie to the indoor fixture before operating.
• UPS (Uninterrupted Power System) function
  • The USP function will be enabled automatically when no electric power is supplied. The backup time of this is 30 minutes.
  • If no electric power is supplied, the device will stop automatically, after and flash a red lamp. User shall take the device down from the glass as soon as possible.
  • Users can pull the device back by pulling a safety rope. Slightly pull the safety rope at an angle close to the glass to prevent dropping.
• Please make sure the battery was full charged (green lamp ON) before using
  • First, turn off the power switch on the device. Plug in the power. Orange lamp ON means charging.
  • Green lamp ON means the battery was full charged.
• Table cleaning mode
  • Put the device on the table and select auto-cleaning mode, the device will run in table-cleaning mode.
• Notice
  • Do not use it on frameless glass
  • Make sure to put the cleaning ring onto the cleaning wheel correctly for no leakage
  • Do not use it in rainy or moist day
  • Set a danger-warning area downstairs for no-balcony windows and doors.

How to Clean the Glass

1. Use ONLY a clean-and-dry cleaning cloth to clean dust and sand of the glass.
2. Change again the cleaning cloth. Keep the upper wheel’s cleaning cloth as clean-and-dry. Spray a little detergent (1~2 spray) on the lower wheel’s cleaning cloth, but not make the cloth wet (if too wet, the machine can’t move well). The clean the glass again.

How to start:

1. Press on “Power Switch” for two seconds to start
2. Press the “Start button” to start cleaning, or press the keys on the remote control to start.

Power Adapter/DC Extension Cable

Using/Changing the Cleaning Cloth

1. Put a clean-and-dry cleaning cloth onto the cleaning ring.
2. Put the cleaning ring onto the clean wheel and ensure the 6 slots on the ring are well fixed with the cleaner wheel to avoid air leakage.

Frequently Asked Questions

Q: If W110-T can’t start up and alert at the beginning of the self-test.
A: It means that the friction factor is not properly used. Please check:

1. Whether the cleaning is too dirty.
2. Glass stickers and window film on the glass will also affect the friction factor.
3. If clean window many times, the glass surface will become very slippery.
4. The glass surface will become slippery if cleaned several times in low-humidity environments such as in air-conditioned rooms.

Q: Robot slips and cannot detect the upper frame of the window in “Auto Up then Down” mode
A: Press key and switch to mode to continue cleaning.

Q: The robot cannot finish the whole window and stop at the middle area.
A: Press mode to continue cleaning.

Q: The robot slips and cannot get higher to the window frame.

1. The friction factor is too low which might be caused by glass stickers, and window film on the glass.
2. The cleaning cloth might be too wet.
3. If clean window many times, the glass surface will become very slippery.
4. The glass surface will become slippery if cleaned several times in low-humidity environments such as in an air-conditioned room.
5. When startup (press, ) keep 10 cm away from the window frame.

Q5: Robot does not move smoothly or move irregularly.

1. The cleaning cloth is too dirty. Please change the cleaning cloth.
2. The glass surface has different friction factor areas due to stickers, window film, and son on. Please use it in single area.
3. The screw of the cleaning wheel might be loose, please tighten it.

Q: After cleaning, remained a circle mark on the glass surface.
A: The cleaning cloth is too dirty. Please change the cleaning cloth and clean it for the second time.

Q: What to do if the robot stopped at a higher area while no electric power is supplied, it alarms, and red lamp flashes.

1. Users can pull the robot back with a safety rope. Slightly pull the safety rope at an angle close to the glass to prevent dropping.
2. Switch the power switch to “off” status.
3. Check whether the electric poor-contact or the cable broke.

Q: What to do if the robot abnormally stopped and the red lamp keeps flashing, without alarm?

1. Slightly pull the safety rope at an angle close to the glass to prevent dropping.
2. Check if any obstacle on the Glass and move the obstacle.
3. Check whether there is air leakage caused by gap, or uneven window frames.

Q: When turn on the power switch, the Fan doesn’t rotate, and without alarm.

battery full charged.

If machine still can’t be used after four hours change, the battery shall be changed.

| Blue: Flash Red: Flash

No alarm

| Machine hardware failure.

Please contact the local retailer or local authorized dealer for repair.

Q: The robot doesn’t stop automatically after glass is fully cleaned.
A: Press stop key to stop it, and take it off carefully from the glass. Download App and control it with your smart phone Users can control the cleaner through Bluetooth matching to your smartphone, which is simple and convenient.

iOS
Requires iOS 7.0 or later. Compatible with iPhone, iPad, and iPod touch,

Android System:
Requires Android 4.3 or later, Bluetooth 4.0 or later. APP can be downloaded from Appstore (ios system) pr google play (android system) by searching “Glass-bot”. Also, it can be obtained if you scan below QR codes.

How to control it through APP?

1. Connect the robot to power supply and press “Start” to turn it on. The robot has to be turned on so the program can be found and matched to your smartphone.
2. Turn on your phone’s “Bluetooth”
3. Find Glassbot App and open it on your phone.
4. App is available.
5. Click “Bluetooth search” on your phone and match it to your phone.
6. Connection successful, you can control it through your phone now.

Scant the QR code to download the APP.

Warranty Conditions

A new product purchased in the Alza. cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This appliance complies with the European Directives 2014/30EU, 2014/35/EU, and 2014/53/EU.

WEEE
The symbol on this appliance indicated that this appliance may not be treated as household waste. Instead, it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about the treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

References

• Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
• alza.at
• Alza | Alza.co.uk
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>